Version: 7.15
Stable244 changelog entries across 61 component(s)
2024-May-29 (1 year ago)
| Component | Change |
|---|---|
| bgp | added initial vpnv6 support; |
| bgp | correctly synchronize input.accept-nlri address list; |
| bgp | fixed prefix count when BGP sessions run with multiple AFIs; |
| bgp | fixed selecting local.default-address from wrong VRF; |
| bgp | use IPv6 as default address-family for IPv6 sessions; |
| bgp-vpn | use VRF interface as gateway for leaked connected routes; |
| branding | added option to hide default configuration prompt; |
| branding | added option to hide or replace default caps-mode-script; |
| bridge | added error message if MLAG peer-port is configured with "mlag-id"; |
| bridge | added MLAG peer-port events to logs; |
| bridge | added MVRP support; |
| bridge | do not allow multiple bonds with same "mlag-id"; |
| bridge | improved protocol-mode STP, RSTP and MSTP stability; |
| bridge | rename monitor property "path-cost" to "actual-path-cost"; |
| bridge | reworked dynamic VLAN creation; |
| bridge | use default "edge=auto" for dynamically bridged interfaces (PPP, VPLS, WDS); |
| certificate | added support for different ACME servers for ssl-certificate (CLI only); |
| certificate | added support for importing pbes2 encrypted private keys with aes128; |
| certificate | added trusted parameter for certificate import; |
| certificate | allow replacing certificate with internal import; |
| certificate | delete certificate related files automatically from storage after import; |
| certificate | improved RSA key signature processing speed; |
| chr | allow to "generate-new-id" only while CHR is running on level "free" license; |
| chr | fixed bogus messages printed out while booting up the system (introduced in v7.14); |
| chr | fixed Xen and Vultr missing ethernet (introduced in v7.14); |
| console | added "byte-array" option to ":convert" command; |
| console | added "proplist" parameter to interactive commands; |
| console | added "rows" property for sniffer quick mode; |
| console | added "sanitize-names" property under "/console/settings" menu (option for replacing reserved characters with underscores for files, disabled by default); |
| console | added "type" parameter to ":resolve" command; |
| console | added "use-script-permissions" option when running scripts from CLI; |
| console | added hotkey "F8" to print entire multiline input; |
| console | added link from "/iot/lora" to "/lora"; |
| console | added log for script execution failures; |
| console | added multi-line print in "/file" menu; |
| console | added option to get "about" value (dynamically created text field by RouterOS services like CAPsMAN); |
| console | added option to read and change file line endings in full-screen editor; |
| console | added warning log for modified filenames due to reserved characters; |
| console | covert spaces, CR, LF in ":convert to=url" command; |
| console | do not convert string to array in ":deserialize" command; |
| console | fixed ":onerror" behavior when "do" block is missing; |
| console | fixed "export where" functionality in certain menus; |
| console | fixed console prompt when entering hot lock mode with "F7"; |
| console | fixed DHCP server "authoritative=no" configuration export; |
| console | fixed do/while implementation not working with variables (introduced in v7.14); |
| console | fixed filtering by "dhcp" flag in "/ip/arp" menu; |
| console | fixed multiple typos in help; |
| console | improved stability; |
| console | optimized configuration export to prevent startup of processes without any configuration; |
| console | remove unnecessary serial ports for Alpine CPUs; |
| console | show system note before serial login if enabled; |
| console | use user permissions when running scripts from WinBox and WebFig; |
| container | do not allow negative number for "ram-high" setting; |
| defconf | do not override default DHCP server lease time; |
| defconf | fixed 5ghz-ax channel width for L11, L22 devices; |
| defconf | fixed unknown topics in log messages; |
| defconf | minor configuration script updates; |
| dhcpv4-relay | added VRF support; |
| discovery | added LLDP MAC/PHY Configuration/Status TLV support; |
| discovery | added LLDP Maximum Frame Size TLV support; |
| discovery | added LLDP Port Description TLV support; |
| discovery | advertise only physical interface name for LLDP PortID TLV; |
| discovery | always send LLDP MED Power TLV if MED was received; |
| discovery | fixed high CPU utilization when "tx-only" mode is set; |
| discovery | optimized LLDP information update; |
| disk | added option to auto configure media sharing; |
| disk | added support for formatting exfat file-system; |
| disk | improved support for file systems with non-ascii characters in file names; |
| disk | improved support for formatting ext4 file-system; |
| disk | improved system stability when adding partition with no parent; |
| disk | improved system stability; |
| disk | the "scan" command will now detect and include USB drives that were previously ejected; |
| dns | added support for "adlist"; |
| dns | added VRF support; |
| dns | improved system stability when caching entries; |
| eap | improved eap-peap, eap-mschap2 client authentication (dot1x/wireless/ipsec); |
| ethernet | fixed default names for CRS310-8G+2S+ device (introduced in v7.14); |
| ethernet | fixed interface disable for CRS326-4C+20G+2Q; |
| ethernet | fixed management port disable/enable on CCR2004-1G-12S+2XS, CCR2004-1G-2XS-PCIe, CCR2216, CCR2116 devices; |
| ethernet | improved port speed downshift functionality for CRS326-4C+20G+2Q; |
| fetch | added "idle-timeout" parameter; |
| fetch | changed topic "info" to "error" for permission denied logs; |
| fetch | fixed slow throughput due to "raw" logging which occurred even when not listening to the topic (introduced in v7.13); |
| file | allow adding and renaming files and directories; |
| file | avoid refreshing whole file system during file modification; |
| file | improved external storage detection; |
| health | added "cpu-temperature" for IPQ50xx devices; |
| health | added log for fan state changes on CRS3xx, CRS5xx, CCR2xxx, CCR1016r2, CCR1036r2 devices; |
| health | fixed fan behavior for CRS310-1G-5S-4S+ (introduced in v7.14); |
| health | fixed rogue voltage on CRS510-8XS-2XQ-IN; |
| install | cdrom and hdd install images contain additional packages that can be interactively selected; |
| ipv6 | properly initialize default ND "interface=all" entry; |
| leds | fixed LEDs for L22 device; |
| lora | removed LoRa WinBox and console functionality duplication (moved to IoT package since v7.11); |
| lte | added "at-chat" support for DELL T99W175 (PID: 0x05c6 VID: 0x90d5); |
| lte | added support for concatenated AT commands in "modem-init" string; |
| lte | added support to set "modem-init" string for "dialer-less" modems; |
| lte | apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G; |
| lte | do not show persistent interfaces for multi-apn slave interfaces; |
| lte | dropped support for R11e-LTE-US FOTA firmware update; |
| lte | fixed R11e-LTE-US modem dial-up; |
| lte | fixed situation where link is not restored after Quectel MBIM modem firmware update; |
| lte | improved FG621-EA modem APN authentication; |
| lte | make interface persistent (unused interface configs can be removed, allow to export and examine current configuration without the device present); |
| lte | removed 2 APN restriction for RG520F-EU modem; |
| lte | use the correct network interface for multi-interface LTE modems; |
| media | added support for DLNA; |
| metarouter | removed support; |
| modem | send APN authentication for BG77 modem also if ppp-client interface created manually; |
| netinstall | improved stability; |
| netinstall-cli | fixed incorrect server address assignment (introduced in v7.14); |
| ovpn | fixed import ovpn config when remote port is missing; |
| ovpn | fixed minor typo in error message; |
| poe-out | added LLDP power management support for devices with single PoE-out port; |
| poe-out | fixed powering devices if input voltage is lower than 12V for hEX PoE (introduced in v7.9); |
| poe-out | improved firmware upgrade stability for AF/AT controlled boards; |
| poe-out | moved "PoE LLDP" property from "/interface/ethernet/poe" to "/ip/neighbor/discovery-settings" and enable it by default; |
| ppp | added "enable-ipv6-accounting" option under PPP AAA menu; |
| ppp | added log when disconnecting a client due to "WISPr-Session-Terminate-Time" RADIUS attribute; |
| ppp | allow underscores in domain names; |
| ppp | enabled monitoring of registration state, RSRP, RSRQ, SINR, PCI, CellID for BG77 modem; |
| ppp | fixed "Framed-IPv6-Pool" usage when received from RADIUS; |
| ppp | fixed "on-down" script running even when tunnel was not up; |
| profiler | added "neighbor-discovery" task; |
| qos-hw | added "offline" tx-manager (CLI only); |
| qos-hw | added "profile" and "map" support for CPU port; |
| qos-hw | added congestion avoidance support for 98DX8xxx, 98DX4xxx, 98DX325x switch chips (CLI only); |
| qos-hw | added ECN marking support for compatible switches; |
| qos-hw | added per-queue traffic shapers (CLI only); |
| qos-hw | added Priority Flow Control for compatible switches (CLI only); |
| qos-hw | added support for QoS profile assignment via ACL rules; |
| qos-hw | added WRED support for compatible switches; |
| qos-hw | fixed port "print stats/usage" when using "from" property; |
| qos-hw | replaced buffer with bytes in QoS monitor; |
| queue | improved system stability (introduced in v7.6); |
| quickset | only show LTE mode for devices without other wireless interfaces; |
| radius | added "require-message-auth" option that requires "Message-Authenticator" in received Access-Accept/Challenge/Reject messages; |
| radius | include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services; |
| route | do not allow routes with empty "dst-address"; |
| route | do not redistribute loopback address as connected route; |
| route | fixed bgp-vpn prefix import with the same route distinguisher (RD); |
| route | improved system stability; |
| route | rework of route attributes; |
| route | show route-distinguisher (RD) in route print; |
| route-filter | allow setting different AFI gateways; |
| route-filter | fixed ext community list matcher; |
| sfp | added "100M-baseFX" link mode support for compatible devices; |
| sfp | added "sfp-ignore-rx-los" setting; |
| sfp | fixed "sfp-tx-fault" state indication for CRS510; |
| sfp | fixed link establishment with 100Mbps optical modules (requires "/interface ethernet reset" or adding "100M-baseFX" modes for advertise or speed properties); |
| sfp | fixed missing Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases; |
| sfp | ignore SFP RX LOS signal for modules with bad EEPROM; |
| sfp | improved "sfp-tx-power" value monitoring in certain cases; |
| sfp | improved auto-negotiation linking for some MikroTik cables and modules; |
| sfp | improved system stability for CR2004-1G-2XS-PCIe (introduced in v7.14); |
| sfp | improved system stability with some GPON modules for CCR2004 and CCR2116 devices; |
| smb | added logs for share connection requests; |
| smb | do not allow setting empty "comment" or "domain" properties; |
| sms | added option to select SMS storage; |
| sms | added SMS PDU to SMS inbox "print detail"; |
| sms | added workaround for modems which do not notify regarding new SMS arrival (missing URC); |
| sms | improved SMS handling; |
| sms | removed SMS for SMIPS; |
| sms | use "gsm" logging topic for serial modem SMS logs; |
| snmp | added new "mtxrOpticalVendorSerial" OID to MIKROTIK-MIB; |
| snmp | added missing PoE-out status codes to MIKROTIK-MIB; |
| socks | attempt to parse domain name as IP before resolving; |
| ssh | added support for user Ed25519 private keys; |
| ssh | export host Ed25519 public key; |
| ssh | fixed bogus output; |
| ssh | fixed permissions to run ".auto.rsc" scripts; |
| ssh | require "policy" user policy when adding public key; |
| sstp | added SNI support; |
| sstp | disconnect clients when server is disabled; |
| storage | improved configuration storing process on first system boot after configuration reset; |
| switch | added support for multiple ingress and egress port mirroring on 98DXxxxx switches; |
| switch | added support for RSPAN mirroring on 98DXxxxx switches; |
| switch | fixed L3HW and QoS monitor during switch reset; |
| system | added resource values (Product name, File name and File version) for Windows executable files; |
| system | general work on optimizing the size of RouterOS packages; |
| system | show "cpu-frequency" for Alpine CPUs; |
| system | skip configuration upgrade from RouterOS v6 on configuration reset; |
| system | updated office address in RouterOS license; |
| system | updated online manual links from "wiki" to the help documentation; |
| timezone | updated timezone information from "tzdata2024a" release; |
| traffic-flow | detect IPv4 source address if not set; |
| traffic-flow | improved system stability; |
| userman | added "require-message-auth" option that requires "Message-Authenticator" in received Access-Request messages; |
| userman | include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services; |
| vlan | added MVRP (applicant) configuration option; |
| vlan | ensure that VLAN MTU remains unchanged when adjustments are made to the parent interface MTU, only modifications to the L2MTU might impact VLAN MTU; |
| vlan | fixed MTU reset on bridge after reboot; |
| vlan | limit "vlan-id" range from 1-4095 to 1-4094; |
| vrf | fixed VRF interfaces being moved to main table after reboot (introduced in v7.14); |
| webfig | allow pasting with ctrl+v into terminal; |
| webfig | fixed column preferences for ordered tables; |
| webfig | show inherited properties for wifi interfaces; |
| wifi | added "reselect-interval" support; |
| wifi | changed interface default to "disabled=yes"; |
| wifi | do not report disabled state for CAPsMAN managed interface; |
| wifi | fixed configuration export for "disabled" property; |
| wifi | improve channel selection after radar detection events; |
| wifi | improve regulatory compliance for L11, L22 devices; |
| wifi | improved interface initialization reliability on DFS channels; |
| wifi | improved stability of DFS check in the 5GHz-A band; |
| wifi | improved system stability when provisioning CAPs in certain cases; |
| wifi | rename "available-channels" parameter to "channel-priorities" and include desirability rating for each channel; |
| wifi | report current CAPsMAN address and identity on CAP; |
| wifi | show inherited properties with "print" command (replaces "actual-configuration") and added "print config" for showing only configured values; |
| wifi-qcom | added configuration.distance setting to enable operation over multi-kilometer distances; |
| wifi-qcom | updated driver; |
| winbox | added "Download" and "Flush" buttons under "System/Certificates/CRL" menu; |
| winbox | added "Flat Snoop" button under "WiFi" menu; |
| winbox | added "FT Preserve VLAN ID" setting under "WiFi/Configuration/FT" menu; |
| winbox | added "Request logout" button under "System/Users/Active Users" menu; |
| winbox | added "Trusted" checkbox under "System/Certificates/Import" menu; |
| winbox | added drop down menu for "User" property when importing SSH key under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus; |
| winbox | added invalid flag under "IP/DHCP Relay" menu; |
| winbox | added key type and key length column for user SSH keys; |
| winbox | added missing SFP monitoring properties under "Interface/SFP" menu; |
| winbox | added passphrase option for SSH host key export; |
| winbox | added passphrase option for SSH host key import; |
| winbox | allow specifying size and rtmpfs size with M, G units under "System/Disks" menu; |
| winbox | allow to specify "M" or "G" postfix for download, upload or total limits under "User Manager/Limitations" menu; |
| winbox | do not show "Host Key Size" when using ed25519 key under "IP/SSH" menu; |
| winbox | fixed the issue where the skin file fails to appear in the user group menu after creation; |
| winbox | renamed "Channel" column to "Current Channel" under "Wifi" menu; |
| winbox | show "Valid Servers" and "Unknown Servers" column by default under "IP/DHCP Server/Alerts" menu; |
| winbox | show inherited properties for wifi interfaces; |
| winbox | show SIM settings for SXTR device under "Interfaces/LTE/Modem" menu; |
| winbox | updated icons for certain menus; |
| winbox | use correct values for "Jump Target" property under "IPv6/Firewall/Filter Rules" menu; |
| wireguard | added option to mark peer as responder only; |
| wireguard | added peer "name" field and display it in logs; |
| wireguard | do not attempt to connect to peer without specified endpoint-address; |
| wireguard | fixed "auto" argument usage for "private-key" and "preshared-key" settings; |
| wireguard | fixed performance issues showing QR code; |
| wireless | perform shorter channel availability check for 5600-5650MHz if regulatory domain permits it; |
| x86 | fixed ixgbe Tx hang by disabling TSO; |
| x86 | fixed VLAN tagged packet transmit for ice driver; |
| x86 | ice driver update to v1.13.7; |
| x86 | improved stability for RTL8125 driver; |
| x86 | ixgbe driver update to 5.19.9; |
| x86/chr | improved panic saving (increased minimal RAM requirements to 256MB); |