Component: health
85 changelog entries across 49 version(s)
Activity over time (changelog entries per month)
- fixed fan and PSU state logging for MIPSBE devices;
- fixed fan and PSU state logging for MIPSBE devices;
- upgraded fan controller firmware to latest version;
- hide settings in CLI if there is nothing to show;
- improved performance on devices with simple voltage sensors;
- added cpu-overtemp-check on ARM, ARM64 devices (CLI only);
- changed PSU state from "no-ac" to "no-input";
- hide settings in CLI if there is nothing to show;
- removed board-temperature on RB5009UPr+S+IN device;
- fixed board-temperature for KNOT device (introduced in v7.15);
- fixed bogus CPU temperature spikes for CCR2216 device;
- fixed missing health for CRS112-8G-4S device (introduced in v7.15);
- improved voltage measurements for RB912UAG-6HPnD and RB912UAG-5HPnD devices;
- removed unnecessary health settings for RB921 and RB922 devices;
- upgraded fan controller firmware to latest version;
- fixed board-temperature for KNOT device (introduced in v7.15);
- fixed missing health for CRS112-8G-4S device (introduced in v7.15);
- added "cpu-temperature" for IPQ50xx devices;
- added log for fan state changes on CRS3xx, CRS5xx, CCR2xxx, CCR1016r2, CCR1036r2 devices;
- fixed fan behavior for CRS310-1G-5S-4S+ (introduced in v7.14);
- fixed rogue voltage on CRS510-8XS-2XQ-IN;
- added limited manual control over fans for CCR1016r2, CCR1036r2 devices;
- changed default "fan-min-speed-percent" from 0% to 12%;
- improved fan control on CRS3xx and CCR1016-12S-1S+r2;
- show voltage when powering KNOT R through Micro-USB;
- updated health properties for CCR1016r2, CCR1036r2 devices;
- show voltage when powering KNOT R through Micro-USB;
- dynamically add and remove invalid sensors (e.g. sfp-temperature);
- added more gradual control over fans for CRS3xx, CRS5xx, CCR2xxx devices;
- fixed configuration export for "/system/health/settings" menu;
- added limited manual control over fans for CRS3xx, CRS5xx, CCR2xxx devices;
- fixed bogus value reporting for CRS510 device;
- fixed "temperature" and "power-consumption" readings for RB1100AHx4;
- fixed fan speed and temperature reporting on CCR1072;
- improved voltage reading on RBmAP-2nD;
- fixed "temperature" and "power-consumption" readings on RB1100x4;
- improved voltage reading on CRS112-8P-4S;
- renamed "cpu-temperature" to "switch-temperature" on CRS312-4C+8XG, CRS326-24S+2Q+, CRS354-48P-4S+2Q+, CRS354-48G-4S+2Q+, CRS504-4XQ-IN, CRS518-16XS-2XQ;
- fixed requesting data from sensor when issuing "get" command;
- fixed voltage reporting on some RBmAP-2nD devices;
- improved temperature reporting;
- added "phy-temperature" sensor monitoring for CRS312 device;
- improved temperature readings on hEX S;
- improved temperature reporting;
- improved temperature reporting;
- fixed voltage monitor on BaseBox5 devices;
- improved temperature reporting;
- fixed voltage monitor on BaseBox5 devices;
- changed PSU state parameter type to read-only;
- removed unused "heater-control" and "heater-threshold" parameters;
- added "gauges" submenu with SNMP OID reporting;
- improved stability for system health monitor on CCR2004-1G-12S+2XS;
- fixed maximum SFP temperature reading under '/system health' menu;
- fixed maximum SFP temperature reading under '/system health' menu;
- fixed health reporting on OmniTIK 5 PoE ac;
- fixed health reporting on OmniTIK 5 PoE ac;
- improved fan control on CRS3xx and CCR1016-12S-1S+r2;
- improved fan control on CRS3xx and CCR1016-12S-1S+r2;
- improved fan control stability on CRS328-24P-4S+RM;
- fixed bad voltage readings on RB493G;
- fixed bad voltage readings on RB493G;
- added missing parameters from export;
- fixed voltage measurements for RB493G devices;
- added missing parameters from export;
- fixed voltage measurements for RB493G devices;
- improved speed of health measurement readings;
- changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
- fixed incorrect PSU index for CRS328-4C-20S-4S+;
- fixed empty measurements on CRS328-24P-4S+RM;
- added log warning when switching between redundant power supplies;
- fixed empty measurements on CRS328-24P-4S+RM;
- fixed bogus voltage readings on CCR1009;
- report fan speed for RB800 and RB1100 when 3-pin fan is being used;
- report fan speed for RB800 and RB1100 when 3-pin fan is being used;
- show power consumption on devices which has voltage and current monitor;
- do not show psu and fan information for passive cooling devices;
- fixed broken factory voltage calibration data for some hAP ac boards;
- fixed incorrect voltage after reboot on RB2011UAS;
- fixed broken factory voltage calibration data for some hAP ac boards;
- fixed incorrect voltage after reboot on RB2011UAS;
- always report fan speed (even if it is 0);
- swap fan2 and fan3 on CCR1072;
- fix voltage for CRS109, CRS112 and CRS210 if powered from external adapter;
- show correct voltage for CRS109,CRS112,CRS210 when powered through PSU and show voltage up to 27V when powered through PoE;
- fix voltage on some RB4xx;