Version: 6.33
Stable88 changelog entries across 39 component(s)
2015-Nov-06 (10 years ago)
| Component | Change |
|---|---|
| CCR1072 | improve ether1 performance under heavy load |
| auto-upgrade | fixed auto upgrade for smipsbe; |
| auto-upgrade | added ability to select which versions to select when upgrading; |
| capsman | limit number of simultaneous DTLS handshakes; |
| capsman | fixed memory leak on CAP joining CAPsMAN when ssld is used; |
| cerm | fix key description for signed certificates; |
| cerm | also accept downloaded CRLs in PEM format; |
| cerm | fix scep server certificate-reply degenerate PKCS#7 signed-data content; |
| cerm | use certificate file name for imported cert name; |
| cerm | rebuild crl for local ca if crl file does not exist; |
| cerm | show crl nextupdate time; |
| cerm | added option to disable crl download in '/certificate settings'; |
| defconf | fix for boards that had bridge with only wlan ports; |
| defconf | fixed rare situation where configuration was only partially loaded; |
| dhcpv6 | various improvement and fixes for dhcp-pd client and ippool6; |
| dns | do not create duplicate entries for same dynamic dns server addresses; |
| dns | initial fix for situation when dynamic dns servers could disappear; |
| allow server to be specified as fqdn which is resolved on each send; | |
| fastpath | eoip,gre,ipip tunnels support fastpath (new per tunnel setting "allow-fast-path"); |
| fastpath | active mac-winbox or mac-telnet session no longer suspends fastpath; |
| fastpath | added per interface fastpath counters; |
| fastpath | added trafflow support in basic ipv4 and fasttrack ipv4 fastpath; |
| fetch | fixed error message when error code 200 was received; |
| general | ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled); |
| general | upnp: automatically adjust mappings to new external ip change; |
| general | l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817; |
| health | fix voltage for CRS109, CRS112 and CRS210 if powered from external adapter; |
| hotspot | add mac-auth-mode setting for mac-as-passwd option; |
| hotspot | add login-timeout setting to force login for unauth hosts; |
| ip pool6 | try to acquire the same prefix if info matches recently freed; |
| ipsec | fix set on multiple policies which could result in adding non existent dynamic policies to the list; |
| ipsec | fix transport mode ph2 ID ports when policy selects specific ip protocol on initiator; |
| ipsec | use local-address for phase 1 matching and initiation; |
| ipsec | fix replay window, was accidentally disabled since version 6.30; |
| ipsec | force flow cache validation once in 1h; |
| log | make default disk file name to reside in flash dir if it exists; |
| lte | improved modem identification to better support multiple identical modems; |
| mpls | properly use mpls mtu for routes; |
| net | fix possible never ending loop when bad CDP discovery packet is received; |
| package | added version tag and show everywhere alongside of version number; |
| packages | allow to reinstall from bundle to separate packages & vice versa; |
| packages | prefer out of bundle packages when both of them are installed; |
| packages | fix a problem of upgrading bundle package to non bundled ones; |
| ppp | added on-up & on-down scripts to ppp profile; |
| ppp | added ppp interface to upnp internals/externals if requested; |
| ppp | when adding ipv6 default route use user provided distance; |
| ppp | added CoA support to PPPoE, PPTP & L2TP (Mikrotik-Recv-Limit, Mikrotik-Xmit-Limit, Mikrotik-Rate-Limit, Ascend-Data-Rate, Ascend-XMit-Rate, Session-Timeout); |
| ppp | added new option under "ppp aaa" - "use-circuit-id-in-nas-port-id"; |
| ppp | handle properly case were ppp client is given same address for local & remote end; |
| ppp, pptp, l2tp, pppoe | fix ppp compression related crashes; |
| ppp-client | added default channels for Alcatel OneTouch L100V; |
| pppoe | added support for MTU > 1492 on PPPoE; |
| pptp & l2tp | fixed problem where android client could not connect if both dns names were not provided (was broken since v6.30); |
| proxy | error.html parsing enhancement to improve performance |
| quickset | fixed HomeAP mode; |
| romon | change port list to be not ordered in export; |
| route | fixed crash on removing route that was aggregated; |
| routerboard | indicate RouterBOOT type in /system routerboard print; |
| snmp | fix system scripts table; |
| ssh | allow host key import/export; |
| ssh | use 2048bit RSA host key when strong-crypto enabled; |
| ssh | support RSA keys for user authentication; |
| trafflow | report flow addresses in v1 and v5 without NAT awareness; |
| tunnels | eoip,eoipv6,gre,gre6,ipip,ipipv6,6to4 tunnels now support dns name as remote address; |
| userman | added 'history clear' to allow flushing undo history, which may take up significant amount of memory for huge databases with hundreds of users; |
| userman | added phone number support to signup form; |
| userman | allow to correctly enable CoA on router; |
| userman | refresh active sessions/users view dynamically; |
| userman | fix report generation problem which could result in some users being skipped from it; |
| webfig | some of the setting were shifted to the right; |
| webfig | make "Copy to Access List" work in CAPsMAN Registration Table; |
| winbox | fix to allow cpu-port as mirror-target |
| winbox | allow to specify dns name in all the tunnels; |
| winbox | make directed broadcasts work for neighbor discovery; |
| winbox | dropped support for winbox v3.0beta and v3.0rc (use winbox v3.0); |
| winbox | added allow-fast-path to eoip, gre & ipip; |
| winbox | do not show power-cycle properties on non poe ports; |
| winbox | make sure that all setting names get shown in full; |
| winbox | added poe power-cycle-ping settings to ethernet interfaces; |
| winbox | added vlan-mode & vlan-id to virtual-ap interface; |
| winbox | added timeout column to ipv6 address lists; |
| winbox | show SFP Tx/Rx Power properly; |
| winbox | added min-links to bonding interface; |
| winbox | do not show health menu on RB951Ui-2HnD; |
| winbox | added support for Login-Timeout & MAC-Auth-Mode in hotspot; |
| winbox | make user ssh key import work again; |
| wlan | improved WMM-PowerSave support in wireless-cm2 package; |
| wlan | improved 802.11 protocol single connection TCP performance for ac chipset with cm2 package. |