Component: general
157 changelog entries across 55 version(s)
Activity over time (changelog entries per month)
- system – added new "switch-marvell" and "wifi-mediatek" packages to support upcoming products;
- vxlan -improved system stability when using IPv6 VTEP;
- mpls- fixed LDP "preferred-afi" parameter;
- factory only release;
- l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817;
- ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled);
- upnp: automatically adjust mappings to new external ip change;
- ppp, pptp, l2tp, pppoe: fixed router dead locked if compression was enabled on link;
- pptp,l 2tp, sstp, pppoe: do not send data packets before we have negotiated connection with other
- revised change that caused reboot by watchdog problems introduced in v6.31;
- certificates -fixed bug where crl stopped working after a while;
- Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled
- Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled
- trafflow: fix in-interface reporting in flow;
- fixed :execute file=
- bonding: fix arp monitoring in active backup mode
- fixed encryption 'out of order' problem on SMP systems;
- fixed router lockup on leap seconds with installed ntp package;
- fixed file transfer on devices with large RAM memory;
- pptp & l2tp & sstp client: support the case were server issues its tunnel
- removed wireless package from routeros bundle package,
- pptp & l2tp client: when adding default route, add special exception route for
- improved connection list: added connection packet/byte counters,
- fixed memory leak on CCR devices (introduced in 6.28);
- fixed vpls bridging (introduced in v6.29);
- fixed problem where some CRS could not be reached (introduced in v6.29);
- added ~fasttrack-connection~ firewall action in filter/mangle tables for marking
- trafflow: add natted addrs/ports to ipv4 flow info;
- tilegx: enable autoneg for sfp ports in netinstall;
- fixed async. ppp server;
- queue tree: some queues would stop working after some configuration changes;
- fixed CRS226 10G ports could lose link (introduced in 6.28);
- fixed FREAK vulnerability in SSL & TLS;
- improved support for new hEX lite;
- added support for SiS 190/191 PCI Ethernet adapter;
- made metarouter work on boards with 802.11ac support or usb LTE;
- make fat32 disk formatting support disks bigger than 134GiB;
- added basic counters for ipv4/bridge fast path, also show status wether fast
- initial RoMon (Router Management Overlay Network) support added.
- check-installation: fixed wrong kernel crc on powerpc boards
- watchdog: fix software watchdog for x86
- CCR improvements in link detection for SFP/SFP+ and auto-negotiation for SFP interfaces;
- improved boot times;
- mpls/vpls have improved per core balancing on CCRs;
- fixed queue tree no-mark matching (was broken since 6.24);
- fixed nested simple queues (was broken since 6.24);
- fixed occasional crash when ipv6 was used;
- fixed route cache overflow (ipv4/ipv6 stops working) if ipsec is used;
- fixed Omnitik upgrade from v5 where wireless config was not correctly saved
- fixed Webfig Design Skin where some skin changes were not saved
- WPS support added to CM2 wireless package
- fixed problem where some of ethernet cards do not work on x86;
- improved CCR ethernet driver (less dropped packets);
- improved queue tree parent=global performance (especially on SMP systems and CCRs);
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have improved per core balancing on CCRs;
- fixed tx for 6to4 tunnels with unspecified dst address;
- fixed problem where some of ethernet cards do not work on x86;
- made powerpc metarouters work again (were broken in v6.22);
- using routing-marks could lead to tunnel loop detection to turn off tunnels;
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features:
- 100% CPU load caused by DNS service fixed;
- 100% CPU load caused by unclassified services fixed;
- 6to4 tunnel fixed;
- new RouterBOOT firmware for Metal 2SHPn to improve wireless stability;
- fixed ugprading from v5;
- fixed 6to4 tunnels having inactive routes;
- interfaces report last link up/down time and link down count;
- stores are replaced with folders and disks are now managed under /disk menu;
- added support for SMSC750x USB Gigabit Ethernet on x86;
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features:
- eoip/gre/ipip/6to4 tunnels have dont-fragment option (inherit/no, no by default for new tunnels);
- bridge has auto mtu feature (enabled by default for new bridges);
- pppoe-server has auto mtu feature (enabled by default for new pppoe servers);
- simple queue performance optimisation/improvement for multi-core RouterOS devices (especially CCR)
- bridge setups sometimes could crash on CCR devices;
- fixed port flapping in 1G mode on sfp-sfpplus1 on CRS226;
- fixed SXT ac model losing it's interface if changing regulatory settings in "routerboard" menu
- 802.11ac support added in wireless-fp package for QCA9880/9882 rev2 (-BR4A) chips;
- l2tp server: added option to enable IPsec automatically;
- poe-out: added power-cycle-ping and power-cycle-interval settings;
- updated timezone information;
- latency improvements on CCR devices;
- fixed problem where sntp server could not be specified in winbox %26 webfig;
- wireless-fp package is now included in routeros one (disabled by default);
- files with '.sensitive.' in the filename require 'sensitive'
- updated timezone information;
- many fixes for CRS managed switch functionality -
- added trunk support for CRS switches;
- added policing support for CRS switches;
- fixed 100% cpu usage on CCRs;
- fix autosupout.rif generation after kernel panic;
- removed 10/100 half duplex from autonegotiation advertisement on CCR;
- updated bootloader firmware;
- ppp: fixed RADIUS accounting;
- ppp: fixed IPV6-Prefix assigning;
- ppp: fixed dial-on-demand;
- support Android usb tethering interface;
- fixed hairpin nat on bridge with use-ip-firewall=yes;
- fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
- disabling/enabling ethernet ports did not work properly on CCRs,
- fixed arp-reply only with more than one ip address on interface;
- fixed RB400 not to reboot by watchdog during micro-sd format;
- added support for new Intel 10Gb ethernet cards (82599);
- fixed port flapping on CCR;
- fix routerboot upgrading if RouterOS is partitioned;
- add support for second serial port on CCR boards;
- fix serial port baudrate selection on CCR boards;
- ethernet interface stats that are behind switch chip
- fixed watchdog on mipsle boards;
- fixed usb Yota LTE modem hangup;
- improved CCR responsiveness on other interfaces when one interface is under attack;
- eoip,gre tunnels could occasionally crash multicore router;
- ipsec sometimes could crash kernel on CCR;
- connection tracking sometimes could crash kernel on CCR;
- winbox, webfig: allow to enter space in the text fields;
- fixed crash when setting master-port on AR8327 switch chips;
- added /ip settings allow-hw-fast-path setting to control AR8327N hardware ipv4 fast path;
- fixed memory amount issue on RB1100AHx2;
- improved queue statistics updating;
- fix 1G linking with some Cisco devices (affects RB7xx, RB9xx, RB1100, RB2011, CCR);
- increased max l2mtu on CCR to 10226 bytes;
- fixed crash on RB1200;
- fix reboot when running on third party hypervisors;
- fixed wifi led order on "SXT Lite5";
- fixed "export compact" in "ip proxy";
- fix MPLS MTU configuration usage;
- manual upgrade to NEW beta poe controller firmware v2.0 for RB750UP and OmniTIK UPA;
- fix RB951-2n wireless issues;
- fix ticking sound on RB411UAHL;
- fix routerboard firmware upgrade on RB951-2n;
- sniffer/torch + simple queues sometimes could crash router;
- fixed upgrade problem when it failed with error "disk is too small" while
- fix health and poe access reliability on OmniTIK UPA and RB750UP boards;
- fix bad block count not to increase on Samsung K9F1208U0C nand;
- fix RB1100 crash on interface disable/l2mtu change/reboot;
- dns could not resolve some domain names, was ignoring replies with DNAME RRs;
- ping times improved on Nv2 high data rate wireless links;
- add pw-type option for BGP VPLS;
- reset packet mark when encapsulating/decapsulating from eoip,ipip,gre,eoipv6,ipipv6,gre6 tunnels
- fixed rare configuration retention problems on RB1100AHx2;
- implemented simple SMB (windows file sharing) server;
- added QuickSet to RBSXT, RB411, RB711;
- added support for LTE modems (cdc ethernet type);
- fix gre tunnels on x86 and other little endian machines;
- eoip: swap tunnel id bytes to be compatible with previous versions;
- eoip,gre: fix setting config
- improved webfig look;
- updated timezone information;
- added ipv6 prefix pools;
- improved ipv4 forwarding performance on all boards with simple configuration
- add passthrough setting to change-dscp, change-ttl, change-mss,
- fixed occasional print command stalling when lots of items;
- fixed RB1100 ether11,12,13 and RB800 ether3 resetting problem;
- implemented usb power-reset command on RB SXT 5HnD;
- wireless-nv2 package now includes the same fixes as RouterOS v5rc11;
- added support for ethernet switch configuration in WinBox;
- allow to configure 11n wireless rate tx powers in WinBox;