Component: route
141 changelog entries across 46 version(s)
Activity over time (changelog entries per month)
- prevent creating routing tables with the same name;
- prevent creating routing tables with the same name;
- added options in /routing/settings to adjust check-gateway=ping timers;
- fixed SNMP output for ECMP routes having interface gateways;
- hide suppress-hw-offload setting from devices that do not support it;
- improved stability;
- improved system stability with multicast routing;
- make check-gateway=ping work on p2p interface gateways;
- removed /routing stats mem-blocks;
- fixed gateway print when gateway is equal to BGP peers address;
- fixed some routes installed in main routing table instead of specified VRF;
- make discourse work with destinations from VRF;
- fixed gateway print when gateway is equal to BGP peers address;
- fixed missing connected routes on setups with large amount of interfaces (introduced in v7.20);
- improved stability;
- added missing and remove unnecessary parameters from /ipv6/route menu;
- afi naming consistency in logs;
- attempt to clean up stuck routes in the routing table;
- do not allow to modify dynamic routes;
- fixed incorrectly set nexthop interfaces for BGP VPN routes;
- fixed issue when route table is installed to kernel without fib setting;
- fixed skipping updated destinations;
- improved stability;
- removed fib-reinstall;
- update router ID when disabled address is removed;
- fixed destination ordering for SNMP;
- fixed SNMP probing of IPv6 routes;
- make routing table print faster with hw-offload, gateway and blackhole queries;
- added options to set dynamic-in and connected-in chains in /routing/settings;
- fixed stuck output when calling prints from multiple routing menus;
- fixed route rule "min-prefix" unset;
- improve stability on BGP reconnect;
- make AFI naming consistent;
- show "routing-table" by default on console print output;
- show BGP session name instead of cache-id;
- show BGP session name instead of cache-id;
- added /ip/route/check tool;
- added subnet length validation on route add;
- do not use disabled addresses when selecting routing id;
- fixed busy loops (route lockups);
- fixed incorrect H flag usage;
- improved stability when polling static routes via SNMP;
- properly resolve imported BGP VPN routes;
- fixed discourse attribute print;
- fixed minor typo in failure message;
- fixed possible issue with inactive routes after reboot (introduced in v7.16);
- improved stability;
- improved stability with static route configuration;
- increased interface name length limit in log messages;
- removed possibility for IPv6 routes to specify interface in the dst-address;
- fixed possible issue with inactive routes after reboot (introduced in v7.16);
- added ability to redistribute isis routes;
- fixed incorrectly handled route distinguisher and route targets (introduced in v7.15);
- fixed memory leak (introduced in v7.15);
- fixed some missing route parameters when printing (introduced in v7.15);
- improved route attribute handling (may increase memory usage);
- improved routing table update performance;
- improved stability when getting entries from large routing tables;
- place static route in the correct VRF when vrf-interface parameter is used;
- rename route type from is-is to isis;
- fixed incorrectly handled route distinguisher and route targets (introduced in v7.15);
- fixed memory leak (introduced in v7.15);
- fixed some missing route parameters when printing (introduced in v7.15);
- do not allow routes with empty "dst-address";
- do not redistribute loopback address as connected route;
- fixed bgp-vpn prefix import with the same route distinguisher (RD);
- improved system stability;
- rework of route attributes;
- show route-distinguisher (RD) in route print;
- fixed gateways of locally imported vpnv4 routes;
- improved route print "count-only" process speed;
- improved stability on route table lookup;
- added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory;
- added "suppress-hw-offload" setting for IPv6 routes;
- fixed gateway after link restart;
- removed deprecated "received-from" property;
- reverse community "delete" and "filter" command behavior;
- added comment for BFD configuration (CLI only);
- convert BFD timers from milliseconds to microseconds after upgrade;
- improved system stability when removing multicast forwarding entries;
- fixed "dynamic-id" for VRF tables;
- improved system stability when making routing decision;
- show SLAAC routes under the "/routing route" menu;
- fixed IPv6 default route presence when received from RA;
- fixed printing of routing table's "count-only" parameter;
- show hoplimit and MTU properties under the "/routing route" menu for SLAAC routes;
- fixed disappearance of inactive static routes after upgrade;
- fixed memory leak;
- added option to join static IGMP and MLD groups (available in "/routing/gmp" menu);
- expose all valid routes to route select filter from BGP;
- expose all valid routes to route select filter from OSPF and RIP;
- fixed false route type detection as blackhole;
- fixed log messages when changing routing configuration;
- made export run faster on tables with a large number of dynamic routes;
- provide more detailed information about prefixes when using "discourse" tool;
- fixed "nexthop" table printing;
- fixed "table" menu emptying after RouterOS upgrade;
- fixed IPv6 /127 route nexthop resolution;
- fixed static routes in VRF becoming invalid after reboot;
- fixed "table" menu emptying after RouterOS upgrade;
- fixed static routes in VRF becoming invalid after reboot;
- allow OSPF and RIP redistributed routes to be matched by routing filters;
- fixed "min-prefix" configuration when set to 0;
- fixed "suppress-hw-offload" update;
- fixed "table" menu emptying after RouterOS upgrade;
- fixed BGP atomic aggregate value;
- fixed ECMP load balancing in FastPath;
- fixed ECMP route removal;
- fixed route addition to VRF from BGP;
- fixed router's LSA for PTP networks;
- fixed routing configuration export on SMIPS devices;
- general stability improvements;
- improved routing table print speed;
- show OSPF and RIP specific attributes in "/routing route" table;
- fixed "table" menu emptying after RouterOS upgrade;
- fixed ECMP load balancing in FastPath;
- fixed route addition to VRF from BGP;
- fixed routing configuration export on SMIPS devices;
- fixed "suppress-hw-offload" update;
- fixed router's LSA for PTP networks;
- show OSPF and RIP specific attributes in "/routing route" table;
- improved stability when connected route is modified;
- improved stability when connected route is modified;
- improved stability when 6to4 interface is configured with disabled IPv6 package;
- improved stability when 6to4 interface is configured with disabled IPv6 package;
- improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
- fixed area range summary route installation in VRF;
- fixed DHCP/PPP “add-default-route” “distance” minimal value to 1;
- improved reliability on routing table update;
- fixed potential route crash on routing table update;
- fixed memory leak when route cache is disabled;
- added suppport for more than 8 bits of options;
- fixed ospf by handling ipv6 encoded prefixes with stray bits;
- do not show duplicate gateway on connected route;
- fixed filter by routing table;
- fixed crash on removing route that was aggregated;
- using ldp could cause connected routes with
- fixed crash that could be triggered by change in nexthop
- some imported VPNv4 routes were not using MPLS labels;
- imported VPNv4 routes were not always updated or removed when
- fix dst-prefix filtering did not return routes when routes with