MikroTik Changelog Tracker
← Back to search All versions

Version: 6.47.10

Long-term

51 changelog entries across 30 component(s)

2021-May-31 (4 years ago)

Component Change
bonding improved system stability when disabling/enabling bonding ports;
branding added option to upload custom files (newly generated branding package required);
capsman use proper units for "ap-tx-limit" and "client-tx-limit" parameters;
console do not clear environment values if any global variable is set;
console require "write+ftp" permissions for exporting configuration to file;
console updated copyright notice;
crs3xx added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release;
crs3xx fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
crs3xx improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
crs3xx improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
defconf fixed default configuration loading on LHG R;
defconf fixed default configuration loading on RBOmniTikPG-5HacD;
dhcp fixed link state checking for DHCP client;
dude fixed configuration menu presence on ARM64 devices;
ethernet improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
ipsec fixed SA address parameter exporting;
lte fixed "earfcn" to band translation for "cell-monitor";
ovpn fixed route cache entry leak when establishing a new session;
poe do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
ppp do not fail "at-chat" command when issued on disabled PPP interface;
ptp improved management service stability when receiving bogus packets;
quickset prefer 5GHz interface for WiFi scan in CPE mode;
rb4011 fixed SFP+ port MTU setting after link state change;
rb4011 improved SFP+ port stability after boot-up;
route improved stability when connected route is modified;
sfp improved cable length monitoring as defined per SFF-8472 and SFF-8636;
supout fixed "topic" column presence in "Log" section;
switch improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
system improved resource allocation (improves several service stability e.g. HTTPS, PPPoE, VPN);
telnet do not send options if connecting to non standard port;
telnet fixed server when run on non standard port;
tile fixed bridge performance degradation (introduced in v6.47);
tr069-client improved management service stability when receiving bogus packets;
upgrade improved "long-term" upgrade procedure on SMIPS devices;
webfig allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
webfig do not corrupt settings when starting "Wireless Sniffer";
webfig do not move top right menu in opposite direction when scrolling horizontally;
webfig show "network-mode" for LTE modems that support it;
winbox do not show "network-mode" parameter for LTE interfaces that do not support it;
winbox do not show empty "CPU Frequency" parameter under "System/Resources" menu;
winbox fixed "reachable-time" value unit under "IPv6/ND" menu;
winbox fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
winbox fixed health reporting on RB960, hEX and hEX S devices;
winbox hide "Allow Roaming" parameter on LTE modems that do not support it;
winbox increased "target" field limit to 128 under "Queues" menu;
winbox show "LCD" only on boards that have LCD;
winbox show "System/Health" only on boards that have health monitoring;
winbox show "activity" column by default under "IP/Kid Control/Devices" menu;
wireless fixed issue with multicast traffic delivery to client devices using power-save;
wireless improved iOS compatibility with HotSpot 2.0 networks;
www added "X-Frame-Options" header information to disallow website embedding in other pages;