Component: defconf
126 changelog entries across 69 version(s)
Activity over time (changelog entries per month)
- added single port MGMT bridge on CCR/RDS for easier /app configuration;
- improved firewall rule for local traffic to the loopback interface;
- added DHCP Client on RDS2216 MGMT interface;
- increased PPP interface wait time;
- added IPv6 FastTrack configuration;
- changed wireless installation from "indoor" to "any";
- disable 5GHz secondary channel on RB4011;
- do not add default password for CAP mode configuration on older Audience devices without a password;
- fixed new port name recognition;
- changed wireless installation from "indoor" to "any";
- disable 5GHz secondary channel on RB4011;
- configure the default-route property for PPP clients only on devices with a built-in modem;
- increased LTE interface wait time;
- configure the default-route property for PPP clients only on devices with a built-in modem;
- do not override default DHCP server lease time;
- fixed 5ghz-ax channel width for L11, L22 devices;
- fixed unknown topics in log messages;
- minor configuration script updates;
- updated wireless password handling;
- fixed firewall rule for IPv6 UDP traceroute;
- do not override default DHCP server lease time;
- do not override default DHCP server lease time;
- fixed 5ghz-ax channel width for L11, L22 devices;
- added log about configuration reset due to pressed reset button;
- fixed Audience scanning-for-wps-ap timeout;
- fixed configuration script on KNOT devices if "ppp-out" interface is removed;
- fixed firewall rule for IPv6 UDP traceroute;
- fixed wifi configuration if interface MAC address is changed;
- improved wifi interface detection after upgrade;
- increased LTE interface wait time;
- updated health settings on configuration revert;
- use "fq_codel" queue as default interface queue for wired ports on LTE devices;
- fixed firewall rule for IPv6 UDP traceroute;
- expire password when reverting configuration;
- fixed bogus wifi password on certain Audience devices;
- fixed configuration for Audience with "wifi-qcom-ac" package;
- fixed wireless band and channel-width selection (introduced in v7.12);
- hide default configuration for users without "sensitive" policy;
- improved wifi interface detection after upgrade;
- updated configuration with new "wifi" directory;
- use "WISP Bridge" default configuration mode for RBGrooveGA-52HPacn device;
- use "fan-min-speed-percent=25" for CRS354-48P-4S+2Q+ device;
- use device factory preset credentials when using CAPs mode;
- use one SSID and enable FT when using "wifi" packages;
- use "WISP Bridge" default configuration mode for RBGrooveGA-52HPacn device;
- fixed bogus wifi password on certain Audience devices;
- do not change admin password if resetting with "keep-users=yes";
- fixed invalid default password setting after configuration reset for 60GHz interface (introduced in v6.49.5);
- allow to use device factory preset credentials in Flashfig and Netinstall configuration files;
- fixed default configuration for RBSXTLTE3-7;
- added CAPs mode script for wifiwave2 devices;
- fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
- fixed default configuration loading on devices with WifiWave2 package;
- do not add passthrough ports to local bridge on CCR2004-1G-2XS-PCIe;
- suggest user to set up new password;
- made "192.168.188.1/24" the default LAN IP address for LTE CPE devices;
- fixed invalid default password setting after configuration reset (introduced in v6.49.4);
- fixed secondary-frequency configuration;
- apply default configuration from branding package when performing reset with button;
- removed overlapping IPv6 firewall rules;
- use router as DNS server for DHCP hosts;
- fixed default configuration loading on LHG R;
- fixed minor typo in configuration description;
- fixed default configuration loading on LHG R;
- fixed default configuration loading on RBOmniTikPG-5HacD;
- fixed default configuration loading on RBOmniTikPG-5HacD;
- fixed default configuration loading on RBcAP-2nD and RBwAP-2nD;
- fixed default configuration loading on RBcAP-2nD and RBwAP-2nD;
- fixed static IP address setting in case default configuration loading fails;
- improved CAP interface bridging;
- improved default configuration generation on devices with non-default wireless interface names;
- fixed default configuration loading on RBmAP-2nD;
- improved default configuration generation on devices with changed wireless interface names;
- improved default configuration generation on devices without wireless package installed;
- fixed default configuration loading on RBmAP-2nD;
- fixed default configuration loading on RBmAPL-2nD;
- fixed default configuration generation on devices without "wireless" package installed;
- fixed default configuration loading on RBmAPL-2nD;
- improved default configuration generation on devices with changed wireless interface names;
- fixed default configuration initialization if power loss occurred during the process;
- added welcome note with common first steps for new users;
- fixed default IP address assigning on non-paired 60 GHz devices;
- added welcome note with common first steps for new users;
- fixed "caps-mode" not initialized properly after resetting;
- fixed default configuration loading on RBwAPG-60adkit (introduced in v6.46);
- fixed default configuration loading after fresh install (introduced in v6.46);
- fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
- require "policy" permission to print default configuration;
- automatically set "installation" parameter for outdoor devices;
- added "custom-script" field that prints custom configuration installed by Netinstall;
- automatically set "installation" parameter for outdoor devices;
- changed default configuration type to AP for cAP series devices;
- fixed channel width selection for RU locked devices;
- fixed configuration not generating properly on upgrade;
- fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN;
- fixed IPv6 link-local address range in firewall rules;
- automatically accept default configuration if reset done by holding button;
- fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN;
- automatically accept default configuration if reset done by holding button;
- properly load default configuration after reset (introduced in v6.42.9);
- properly clear global variables when generating default configuration after RouterOS upgrade;
- properly clear global variables when generating default configuration after RouterOS upgrade;
- fixed default configuration for RBSXTsq5nD;
- fixed missing bridge ports after configuration reset;
- fixed wAP LTE kit default configuration;
- fixed bridge default configuration for SOHO devices with more than 9 Ethernet interfaces;
- fixed wAP LTE kit default configuration;
- fixed DISC Lite5 LED default configuration;
- fixed DISC Lite5 LED default configuration;
- fixed RouterOS default configuration (introduced in v6.40.3);
- discard default configuration startup query with configuration change from Webfig;
- discard default configuration startup query with RouterOS upgrade;
- fixed default configuration generation when wireless package is disabled;
- fixed Groove 52 ac band settings;
- discard default configuration startup query with RouterOS upgrade;
- discard default configuration startup query with configuration change from Webfig;
- fixed Groove 52 ac band settings;
- fixed default configuration generation when wireless package is disabled;
- fixed default configuration restore if virtual wireless interface were present;
- fixed default configuration when wireless package is used;
- using caps button now forces all wireless interfaces in caps mode;
- changed channel extension to 20/40/80mhz for all ac boards;
- fixed default configuration for SXT LTE;
- fixed rare situation where configuration was only partially loaded;
- fix for boards that had bridge with only wlan ports;
- fix default configuration for routers without wireless package.