Version: 6.42.2
Stable30 changelog entries across 19 component(s)
2018-May-17 (7 years ago)
| Component | Change |
|---|---|
| bridge | do not allow to add same interface list to bridge more than once; |
| bridge | fixed LLDP packet receiving; |
| bridge | fixed processing of fragmented packets when hardware offloading is enabled; |
| console | fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1); |
| crs317 | fixed link flapping when inserted S+RJ10 module without any cable; |
| defconf | fixed wAP LTE kit default configuration; |
| dhcpv4 | prevent sending out ICMP port unreachable packets; |
| dhcpv4-client | fixed DHCP client stuck in renewing state; |
| dhcpv6-relay | fixed missing configuration after reboot; |
| filesystem | fixed NAND memory going into read-only mode; |
| hotspot | fixed user authentication when queue from old session is not removed yet; |
| interface | fixed "built-in=no" parameter for manually created interface lists; |
| interface | fixed "dynamic" built-in interface list behaviour; |
| interface | fixed interface list which include disabled member; |
| interface | fixed interface list which include/exclude another list; |
| interface | fixed interface configuration responsiveness; |
| ipsec | fixed policies becoming invalid if added after a disabled policy; |
| ipsec | improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4; |
| led | added "dark-mode" functionality for hAP ac and hAP ac^2 devices; |
| lte | improved LTE communication process on MMIPS platform devices; |
| quickset | fixed dual radio mode detection process; |
| routerboard | properly represent board name for hAP ac^2; |
| tile | fixed Ethernet interfaces becoming unresponsive; |
| winbox | allow to specify "any" as wireless "access-list" interface; |
| winbox | fixed "/ip dhcp-server network set dns-none" parameter; |
| wireless | enable all chains by default on devices without external antennas after configuration reset; |
| wireless | fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42); |
| wireless | fixed usage of allowed signal strength values received from RADIUS; |
| wireless | improved wireless throughput on hAP ac^2 and cAP ac; |
| x86 | fixed reboot caused by MAC Winbox connection; |