Component: winbox – MikroTik Changelog Tracker

7.21 Stable 2026-Jan-12 (3 weeks ago)

added "Last Status" and "Last Address" fields in "Tools/Email" menu;
added file selector for BTH files;
added Forwarding Table in "MPLS" menu;
added missing "SM-DP+ Oid" LTE eSIM provisioning field;
added Sessions tab in "Routing/RPKI" menu;
added support for new settings and fixed several existing ones;
Bandwidth test, Speed test, Ping, Traceroute tools use RouterOS DNS service to resolve domain names;
fixed "Too many entries" not showing in WinBox v4;
fixed Disk iscsi/smb configuration;
fixed Disk NVMe-TCP configuration;
fixed Dude/Tools appearance after Apply action;
fixed graphs in some forms with big numbers;
fixed Keepalive Time format in "Routing/BGP" menus;
fixed Preshared Key "auto" and "none" options for WireGuard Peer;
fixed switch QoS monitor for mirror properties;
hide certificate "Issuer" field for certificate template;
hide IPv6 addresses for IP neighbors that no longer have them;
make multiple address fields required;
make separate inputs for WiFi Interworking "Authentication Types" and "Connection Capabilities" fields;
make VETH gateway fields not required;
move VRF from Ethernet to generic Interface table;
removed "Add" for dynamic DNS servers;
reorder BGP and OSPF tabs in logical order;
restore route max object 10000 limit;
show "Trusted" field for certificate template;
show warnings in "Routing/BGP" menus;
show warnings in Disk menu;
updated and shortened window titles (e.g. Address List -> Addresses);

7.20.5 Stable 2025-Nov-27 (2 months ago)

group L3 and L4 fields under switch rules menu;

7.20.4 Stable 2025-Nov-05 (2 months ago)

show "Bus" parameter for "USB Power Reset" on Chateau LTE6/LTE18 ax devices;
show "System/RouterBOARD/Mode Button" on devices that have such a button;

7.20.2 Stable 2025-Oct-21 (3 months ago)

added IP/Socksify menu;
added support for 200Gbps/400Gbps Rate fields;
fixed Ethernet Tx Stats (introduced in v7.20);

7.20.1 Stable 2025-Oct-10 (3 months ago)

fixed WinBox 3 application failure when opening IPv6/Firewall/Connection entry (introduced in v7.20);

7.20 Stable 2025-Sep-29 (4 months ago)

added "Digest Algorithm" under "System/Certificates" menu;
added "Note" field in LTE Firmware Upgrade;
added "Reselect Time" for wifi;
added Address List Extra Time under "IP/DNS" menu;
added EAP identity under "WiFi/Registration" menu;
added Heartbeat under "Bridge/MLAG" menu;
added Installation under "WiFi" menu;
added missing columns under "System/Users/SSH Keys" menu;
added missing Comments under "User Manager" menus;
added missing properties to "Container" menu and improved field ordering;
added missing WPA2 PSK SHA2 option under "WiFi/Security" menu;
added MPLS Mangle;
added option to create new entries under "System/Users/SSH Keys" menu;
allow to specify CAPsMAN Address as IPv6 LL;
bump minimal WinBox version to 3.42;
correctly unset Locked CAPsMAN field;
differentiate PPP Profile Rx/Tx Queue settings;
display errors from the "Files/Sync" menu;
fixed "Rate" and "Full Duplex" monitor values after link down under "Interface/Ethernet" menu;
fixed container RAM parameter type;
fixed missing warning under "Routing/BGP/Instances" menu;
fixed Record Type field under "Tools/Netwatch" menu;
improved byte type field representation;
improved Switch QoS layout;
make IPv6 Immediate Gateway read-only;
make log message field as multiline;
move CAPsMAN settings button from Remote CAP to WiFi table;
removed duplicate mounts option;
rename Ping Timeout field to Interval;
rename SMS Type field to Modem Type;
rework LTE firmware upgrade buttons into one window;
show "Switch" related menus only on boards that support such features;
show all columns under "System/Users/SSH Keys" menu by default;
use same WireGuard default values as in console;

7.19.6 Stable 2025-Sep-12 (4 months ago)

allow selecting bonding interface under "Switch/Rule" menu;
use "auto" as default value for VXLAN "Don't Fragment" property;

7.19.3 Stable 2025-Jul-03 (7 months ago)

show/hide corresponding fields when switching RADIUS client mode between RadSec and UDP;

7.19.2 Stable 2025-Jun-20 (7 months ago)

fixed "Last Topology Change" for bridge port monitor;

7.19 Stable 2025-May-22 (8 months ago)

added "MAC Telnet" under "Wifi/Registration" menu;
added "Multi Passphrase Group" for wifi;
added "Reset MAC address" for legacy wireless and wifi;
added comment fields for WiFi "Multi Passphrase Group" menu;
added comment under "User Manager/Routers" menu;
added country to wireless setup-repeater;
added missing "Switch" menu for RDS;
added missing file systems for disk formatting;
added missing parameters for BTRFS related action functions;
added mount-point parameter under "Disk/Settings" menu;
added netmask support for switch rule Src/Dst IPv6 Address settings;
allow opening BTRFS menu entries;
changed default wireless wds-cost-range values;
do not show not relevant values for certificate template;
fixed "Multi Passphrase Group" setting for wifi;
fixed "registry-url" field under "Containers" configuration menu;
fixed missing SMB client on non-ROSE devices;
fixed several statistics counters not being read only;
fixed switch menu for Chateau 5G;
fixed time interval type fields precision under "Disks" menu;
hide container File/Remote Image fields only when instance added;
improve graphing efficiency when communicating with WinBox;
make BTRFS "Parent" and "Send Parent" options optional;
properly show/hide OSPF, RIP and BGP tabs for IPv6 routes;
renamed "raid-member" to "raid member" flag for consistency;
show eSIM profiles under eSIM menu without manual refresh;

7.18.2 Stable 2025-Mar-11 (10 months ago)

improve graphing efficiency when communicating with WinBox;

7.18.1 Stable 2025-Feb-28 (11 months ago)

fixed missing SMB client on non-ROSE devices;

7.18 Stable 2025-Feb-24 (11 months ago)

added "Copy to Provisioning" button under "WiFi/Radios" menu;
added "Last Logged In/Out" and "Times Matched" properties under "WiFi/Access List" menu;
added "Reset Alert" button under "IP/DHCP Server/Alerts" menu;
added L3HW Advanced and Monitor;
added missing options under "System/Disk" menu;
added TCP settings under "Tools/Traffic Generator/Packet Templates" menu;
do not show 0 Tx/Rx rate under "WiFi/Registration" menu when values are not known;
do not show LTE "Antenna Scan" button on devices that do not support it;
fixed locked input fields when creating new certificate template;
show LTE "CA Band" field only when CA info is available;
show warning messages for static DNS entries;

7.17.1 Stable 2025-Jan-30 (1 year ago)

show warning messages for static DNS entries;

7.17 Stable 2025-Jan-16 (1 year ago)

added "Copy to Access List" option under "WiFi/Registration" menu;
added "Max Entries" and "Total Entries" properties under "IP/Firewall/Connections/Tracking" menu;
added "Scan" and "Test Disks" features under "System/Disks" menu;
added Enable/Disable buttons under "Tools/Graphing" menus;
added MAC address support for "Group" property under "Bridge/MDB" menu;
added missing "bus" option for compatible devices under "System/RouterBOARD/USB Power Reset" menu;
added missing properties under "IP/Neighbors" menu;
allow to edit Ethernet MAC address;
clear "Value" field when unset under "IP/DNS/Static" menu;
fixed duplicate timezone names;
fixed typo in "System/Reset Configuration" menu;
hide LCD menu for devices without display;
hide LTE "External Antenna" menu for devices without switchable antenna option;
improved stability;
minimal required version is v3.41;
refresh values under "Bridge/VLANs/MVRP Attributes" menu;
renamed and moved "System/Auto Upgrade" to "System/Packages" menu;
renamed wrong invalid interface flag to inactive;
show "FEC" property on status tab for interfaces that use it;
show MLAG settings for CRS326-4C+20G+2Q+ device;
updated properties and behavior under "Switch/QoS" menu;

7.16 Stable 2024-Sep-20 (1 year ago)

added "Import Router ID" parameter under "Routing/BGP/VPN" menu;
added "Switch/QoS" menu for CRS3xx, CRS5xx, CCR2116 and CCR2216 devices;
added "Trace" column under "System/History" menu;
added configuration settings for ROSE;
added extra "File System" under "Format Drive" button;
added missing "Default Name" property for interfaces;
do not show "Last Logged In" and "Expire Password" when creating new system user;
fixed "Authority" property under "System/Certificates/Requests" menu;
fixed duplicated "MVRP Attributes" table;
fixed false invalid flag under "System/Ports/Remote Access" menu;
fixed issue with skin file appearing as unknown in user group menu (introduced in v7.15);
fixed signal bar "excellent" tooltip;
fixed Switch menu for RB1100AHx4 device;
improved QR code display;
moved DHCPv6 Server "Allow Dual Stack Queue" property from General to Queues tab;
moved Switch menu tabs to individual menus;
properly display available address-pools for DHCPv6 server configuration;
removed deprecated x86/CHR specific settings under "System/Resources" menu;
removed spare argument for "PFS Group" property under "IP/IPsec/Proposals" menu;
renamed configurable wifi property "Tx Power" to "Max Tx Power";
separated different Watchdog settings into logical tabs;
use CAP serial number with "Set Identity" button under "WiFi/Remote CAP" menu;
use correct default value for "Partition Offset" property;

7.15.1 Stable 2024-Jun-07 (1 year ago)

fixed issue with skin file appearing as unknown in user group menu (introduced in v7.15);
fixed missing system note on login (introduced in v7.15);

7.15 Stable 2024-May-29 (1 year ago)

added "Download" and "Flush" buttons under "System/Certificates/CRL" menu;
added "Flat Snoop" button under "WiFi" menu;
added "FT Preserve VLAN ID" setting under "WiFi/Configuration/FT" menu;
added "Request logout" button under "System/Users/Active Users" menu;
added "Trusted" checkbox under "System/Certificates/Import" menu;
added drop down menu for "User" property when importing SSH key under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus;
added invalid flag under "IP/DHCP Relay" menu;
added key type and key length column for user SSH keys;
added missing SFP monitoring properties under "Interface/SFP" menu;
added passphrase option for SSH host key export;
added passphrase option for SSH host key import;
allow specifying size and rtmpfs size with M, G units under "System/Disks" menu;
allow to specify "M" or "G" postfix for download, upload or total limits under "User Manager/Limitations" menu;
do not show "Host Key Size" when using ed25519 key under "IP/SSH" menu;
fixed the issue where the skin file fails to appear in the user group menu after creation;
renamed "Channel" column to "Current Channel" under "Wifi" menu;
show "Valid Servers" and "Unknown Servers" column by default under "IP/DHCP Server/Alerts" menu;
show inherited properties for wifi interfaces;
show SIM settings for SXTR device under "Interfaces/LTE/Modem" menu;
updated icons for certain menus;
use correct values for "Jump Target" property under "IPv6/Firewall/Filter Rules" menu;

7.14 Stable 2024-Feb-29 (1 year ago)

added "accept-protocol-version" parameter to the L2TP server settings;
added "mode-button" and "switch" menus for L41G-2axD&FG621-EA;
added "Name" parameter under "Tools/Netwatch" menu;
added "page-refresh" setting to the Graphing settings;
added "Port Cost Mode" setting under "Bridge" menu;
added "VRF" parameter under "Tools/Ping" menu;
added "x25519" argument for "DH Group" parameter under "IP/IPsec/Profiles" menu;
added missing "Protocol" arguments under "IPv6/Firewall" menu;
added missing monitoring properties under "WireGuard/Peers" menu;
added Preboot Etherboot settings to the System/RouterBOARD/Settings menu;
do not show USB settings for CRS devices that does not need it;
fixed "Bridge Cost" range under "Interfaces/VPLS" menu;
fixed "Password" button under "Quick Set" menu;
improved connection speed and reliability;
improved route table automatic refresh process for static routes;
improved status values under "System/PTP" menu;
improved system stability with large packets;
include "te-tunnel" parameter in VPLS interface monitor;
properly validate "passthrough-subnet-size" in the LTE APN settings;
remove "Root Bridge ID" property under "Bridge/MSTIs" menu;
removed "sfp all" option from combo port settings;
renamed "Wireless Table" menu to "Wifi";
show "routing-table" column under IP/Route menu by default;
show all columns under "Routing/PIM SM/Static RP" menu by default;

7.13.1 Stable 2024-Jan-05 (2 years ago)

renamed "Wireless Table" menu to "Wifi";

7.13 Stable 2023-Dec-14 (2 years ago)

added "Hw. Offload" property under "IP/Firewall/Filter" menu;
added "Ping" button under "IP/DHCP Server/Leases" menu;
added "Tx bps" and "Rx bps" monitor values under "WiFi/Registration" menu;
added "none" argument for "Preshared Key" under "WireGuard/Peers" menu;
added icon to entries under "WiFi/Access List" menu;
added missing "qos-classifier" argument for "Hw. Caps" under "WiFi/Radios" menu;
added missing arguments for "MAC Format" under "Wireless/Security Profiles/RADIUS" menu;
allow opening entries under "WiFi/Registration" menu;
fixed default "Name Format" property under "WiFi/Provisioning" menu;
fixed minor typo under "Routing/BFD" menu;
improved connection speed;
updated "wireless" and "wifi" menus;

7.12.1 Stable 2023-Nov-17 (2 years ago)

added missing arguments for "MAC Format" under "Wireless/Security Profiles/RADIUS" menu;

7.12 Stable 2023-Nov-09 (2 years ago)

added "Addresses" property under "Routing/BFD/Configuration" menu;
added "BUS" property for USB Power Reset button for LtAP-2HnD and CCR1072;
added "Comment" under "Routing/BFD/Configuration" menu;
added "g" flag under "IPv6/Routes" menu;
added "Host Key Type" setting under "IP/SSH" menu;
added "Key Owner" setting under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus;
added "Name Format" property under "WifiWave2/Provisioning" menu;
added "Remote Min Tx" parameter under "Routing/BFD/Session" menu;
added "Startup Delay" setting under "Tools/Netwatch" menu;
added "USB" button under "System/RouterBOARD" menu for LtAP-2HnD;
added "Use BFD" setting under "Routing/RIP/Interface-Template" menu;
added Enable/Disable button under "Routing/RIP/Static Neighbors" menu;
added missing properties under "WifiWave2" menu;
added MQTT subscription menu;
allow to change port numbers for SCTP, DCCP, and UDP-LITE protocols under "IP/Firewall" menus;
allow to set multiple addresses and added IPv6 support under "Interface/VETH" menu;
allow to specify server as DNS name under "Tools/Email" menu;
changed "MBR Partition Table" checkbox to unchecked by default under "System/Disks/Format-Drive" menu;
do not show "F" flag for disabled entries under "IP/Routes" menu;
fixed "Address" property under "WifiWave2/Remote-CAP" menu;
fixed "Do" property under "Routing/Filters/Select Rule" menu;
fixed "Group Key Update" maximum value under "WifiWave2/Security" menu;
fixed "Range" property under "Routing/Filters/Num Set" menu;
fixed "Switch" menu for CCR2004-16G-2S+;
fixed entry numbering and ordering under "WifiWave2/Provisioning" menu;
fixed minor typos;
improved support for certain properties under "WifiWave2/Interworking Profiles" menu;
rename "DSCP" setting to "DSCP (+ECN)" under "Tools/Traffic-Generator/Packet-Templates" menu;
rename "Name" setting to "List" under "IP,IPv6/Firewall/Address-List" menu;
rename "Password" button to "Change Now" under "System/Password" menu;
show "unknown" value for "FS" property under "System/Disks" menu if the data is not available;

7.11 Stable 2023-Aug-15 (2 years ago)

added missing status values for Ethernet and Cable Test;
added warning about non-running probe due to "startup-delay";
fixed "Storm Rate" property under "Switch/Port" menu;
fixed BGP affinity display;
fixed default "Ingress Filtering" value under "Bridge" menu;
improved supout.rif progress display;
rename "Group Master" property to "Group Authority" under "Interface/VRRP" menu;

7.10 Stable 2023-Jun-15 (2 years ago)

added "MPLS/Settings" menu;
added "Queues" configuration tab when creating new entries under "IPv6/DHCP-Server" menu;
rename "URL" property to "Action data" under "IP/Web-Proxy/Access" menu;

7.9 Stable 2023-May-02 (2 years ago)

added "MTU" and "Hoplimit" properties under "IPv6/Routes" menu;
added "Preferred AFI" property under "MPLS/LDP-Instance" menu;
added "S" flag under "IPv6/Firewall/Connections" menu;
added "Tx Power" property under "Wifiwave2/Status" menu;
added "Tx Queue Drops" property under interface settings "Traffic" tab;
added "Username" and "Password" properties under "Container/Config" menu;
added "Valid" and "Preferred" properties under "IPv6/Address" menu;
added missing properties for "Remote ID Type" under "IP/IPsec/Identities" menu;
changed route flag name from "invalid" to "inactive";
fixed "TLS" property under "Tools/Email" menu;
fixed "Type" property under "System/Disk" menu when "rose-storage" package is installed;
fixed changing slot name under "System/Disk" menu;
fixed default value for "Allow managed" property under "Zerotier" menu;
fixed duplicate "My ID" column under "IP/IPsec/Identities" menu;
fixed minor typo in "WifiWave2/Radios" menu;
fixed missing "Sector Writes" for certain devices under "System/Resources" menu (introduced in v7.8);
improved Ethernet advertise, speed and duplex settings;
only show permitted countries for wifiwave2 interfaces;
show missing "Designated Bridge" and "Designated Port Number" monitoring data under "Bridge/Port menu;

7.8 Stable 2023-Feb-24 (2 years ago)

added "Connect" button under "WifiWave2/Scan" menu;
added "Disable/Enable" buttons under "WifiWave2" menu;
added "Match Subdomain" parameter under "IP/DNS/Static" menu;
added "Provision" button under "WifiWave2" menu;
added "Start On Boot" checkbox under "Container" menu;
added "Tx Rate" and "Rx Rate" columns under "WifiWave2/Registration" menu;
added missing properties when setting "Use DoH Server";
added missing WifiWave2 related parameters under "WifiWave2" menu;
added support for manual RAM file system (TMPFS) creation under "System/Disk" menu;
added Type "https-get" parameter under "Tools/Netwatch" menu;
allow selecting bridge for static entries under "Bridge/MDB" menu;
fixed displaying of "Default Prepend" value under "Routing/BGP/Sessions" menu;
fixed displaying of "Tx/Rx CCQ" values under "Wireless/Registration" menu;
fixed displaying of flags under "System/Console" menu;
fixed displaying of multiple character flags;
fixed usage of IPv6 family addresses under "IP/Web Proxy/Access" menu;
hide "TTL" value for static DNS entries with FWD type;
hide unnecessary properties for virtual interfaces under "WifiWave2" menu;
improved mouseover hint for "local" policy under "System/Users/Groups" menu;
rename "Multicast Router" monitoring property to "Is Multicast Router" under "Bridge" menu;
show "Gateway" column by default under "IPv6/Routes" menu;

7.7 Stable 2023-Jan-12 (3 years ago)

added "Active" prefix for current "Circuit ID" and "Cookie Length" fields for L2TP-Ether interfaces;
added "Make Static" button to "IP/DHCP Server/Leases" menu;
added "bus" parameter for "USB Power Reset" command on Chateau ax;
added missing "force" parameter for new "IP/DHCP Server/Options" entries;
added missing "vlan-id" column under "IP/Hotspot/Hosts" table;
do not show LACP related status parameters for other bonding types;
fixed default MTU value for CAP interfaces;
fixed minor typo in "Zerotier" menu;
improved handling of large WinBox protocol messages;
increased maximum number of Winbox read-only sessions 5->25;
properly save "Interfaces/Detect Internet/Detect Internet State" menu in session file;
removed bogus VRF tab from "Interface" menu;
show "Switch" menu on Chateau 5G ax;
show "Switch" menu on NetFiber 9;
show "System/Health/Settings" only on boards that have configurable values;
show "System/RouterBOARD/Mode Button" on devices that have such feature;
show "USB Power Reset" menu on Chateau 5G ax;
show dynamic comment in WifiWave2 registration table;

7.6 Stable 2022-Oct-17 (3 years ago)

added "Active" prefix for current remote and local session ID fields for L2TP-Ether interfaces;
added "address-list" parameter under "IP/DNS/Static" menu;
added "File Name" option for "Load Config" parameter under "System/SwOS" menu;
added icon for TR069-client menu;
added MACsec support;
added quick filtering option for route list;
added "Rapid Commit" parameter support under "IPv6/DHCP-Server" menu;
added "Reset Traffic Counters" button for all interfaces;
added "type" and "status-report-request" parameters under "Tools/SMS" menu;
allow "timeout" value to be less than 1 under "Tools/Netwatch" menu;
allow to rename mounted disks;
changed order of tabs under "User Manager" menu;
changed "uptime" parameter format when using the wifiwave2 package;
do not show unavailable features on SMIPS devices;
fixed interface traffic graph drawing on RB5009;
fixed maximum allowed value for VRRP's "priority" parameter;
fixed "Session Uptime" value for not established sessions under "Routing/BGP" menu;
fixed "Session Uptime" value under "Routing/BGP" menu;
fixed "System/SwOS" window refreshing after changes are detected;
fixed "User Manager/User Profiles" window refreshing after changes are detected;
made "backup.swb" the default value for SwOS backup;
made sessions removable in "User Manager" menu;
show "F" flag for failed entries under "Interfaces/VRRP" menu;
show "Switch" menu on Chateau LTE18 ax;
show "System/Health" only on boards that have health monitoring;
show "System/RouterBOARD/Mode Button" on devices that have such feature;

7.5 Stable 2022-Aug-30 (3 years ago)

do not show previously attached LTE interfaces while establishing LTE connection;
enabled all filters by default under "Tools/Torch" menu;
fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
fixed "Next Run" parameter displaying under "System/Scheduler" menu;
fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
show warning messages for BGP connection entries;

7.4.1 Stable 2022-Aug-04 (3 years ago)

fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;

7.4 Stable 2022-Jul-19 (3 years ago)

add a log and log-prefix options to IPv6 firewall NAT and mangle rules;
added "name" parameter under "Routing/BGP/Session" menu;
added "to-address" and "to-ports" parameters under "IPv6/Firewall/NAT" menu;
added support for "veth" interface types;
fixed "inactive" flag naming under "MPLS/Local Mapping" menu;
fixed IP/Route and IPv6/Route OSPF type value;
fixed filename dropdown value filtering;
fixed minor typo under "Interface" stats;
fixed units for "reachable-time" parameter under "IPv6/ND" menu;
removed "TLS Host" parameter from "IP/Firewall/NAT" menu;
removed duplicate signal strength column under "Wireless/Registration Table" menu;
removed unused "Apply Changes" button from BGP sessions menu;

7.3 Stable 2022-Jun-06 (3 years ago)

added "Comment" parameter for BGP templates and connections;
added "Default Cost" parameter under "Routing/OSPF/Area" menu;
added "ra-preference" parameter under "IPv6/ND" menu;
added SKID and AKID parameters under "Certificate" menu;
added missing "IBGP", "EBGP", "Limit Exceeded" and "Stopped" parameters under "Routing/BGP/Sessions" menu;
added missing "Keep Sent Attributes" parameter under "Routing/BGP/Connection" menu;
added missing "Scan List" parameter for W60G interfaces;
added missing BGP session commands;
added support for 2.5Gbps and 100Gbps Ethernet speed options;
added warning message for LTE upgrade process;
do not auto start Wireless Sniffer when opened;
do not show "Session Uptime" parameter under "LTE" menu if not supported by modem;
do not show "unknown" area under "Routing/OSPF/LSA" menu;
do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu;
fixed "Disconnect Timeout" parameter type under "CAPsMAN" menu;
fixed "IP/Cloud" window refreshing after changes are detected;
fixed "Type" values under "IP/Route" menu;
fixed graph drawing in QuickSet;
fixed hex type values under "User Manager" menu;
fixed minor typo in reboot confirmation prompt;
fixed typo in ZeroTier instance title;
made "Interface Templates" table sortable under "Routing/OSPF" menu;
made "MPLS Interface" table sortable under "MPLS" menu;
made 56 the default ping size;
made wireless access list entries sortable when using the wifiwave2 package;
minimal required version is v3.33;
moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu;
moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IPv6/Firewall" menu;
properly clean up SFP module information after it is unplugged;
properly clean up disk after a failed file upload;
properly load band values under "LTE" menu;
removed obsolete "Routing Table" parameter under "IP/Firewall" menu;
show "System/RouterBOARD/Mode Button" on devices that have such feature;
show PVID column by default under "Bridge" menu;
show correct file system type under "System/Disks" menu;
take into account timezone for timed values under "User Manager" menu;

7.2.2 Stable 2022-Apr-28 (3 years ago)

do not show "unknown" area under "Routing/OSPF/LSA" menu;
do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu;
made "Interface Templates" table sortable under "Routing/OSPF" menu;
properly clean up SFP module information after it is unplugged;
properly clean up disk after a failed file upload;
show PVID column by default under "Bridge" menu;

6.49.6 Stable 2022-Apr-07 (3 years ago)

added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;

7.2 Stable 2022-Mar-31 (3 years ago)

added "Disconnect Notify" checkbox to "Interface/OVPN Client" menu;
added "Freq. Usage" and "Scan" buttons for WifiWave2 interfaces;
added "Ignore Missing" selector to "System/Packages" menu;
added "Mode" parameter under "Wireless" menu with WifiWave2 package;
added "Routing Table" parameter for IPv6 routes;
added "TLS Version" parameter for "Interface/OVPN";
added "VPN" tab to "Routing/BGP" menu;
added "VRF" parameter for "SSH" and "Telnet" menus;
added "VRF" parameter to "IP/Services" menu;
added "comment" parameter to "User Manager/Users" menu;
added "host-uniq" parameter to PPPoE client interface;
added MLAG support;
added SHA256 and SHA512 "Auth" values for OVPN menu's;
added ZeroTier support;
added explicit "Upload" and "Download" names for "Bucket Size" parameters under "Queues" menu;
added interface list support for "IP/Traffic Flow" menu;
added local/remote CPU load parameters for "Bandwidth Test";
added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;
added missing "accounting", "interim-update" and "radius-password" parameters under "IP/DHCP Server" menu;
added support for "Tool/Speedtest" menu;
added support for W60G align tool;
allow adding more than 100 tagged/untagged interfaces under "Bridge/VLAN" menu;
allow configuring "VTEP" under "Interface/VXLAN" menu;
allow setting "Interface" parameter for 100G LED types;
changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
do not require "name" and "file name" parameters for certificate import/export;
do not show "Antenna Scan" button on devices that do not support it;
do not show connection tracking table if it has more than 10000 entries;
fixed "00:00:00" time printing;
fixed "Switch" menu on Chateau devices;
fixed "action" field in "IP/Web Proxy/Access" menu;
fixed "expires-after" certificate parameter value;
fixed CHR License renewing process;
fixed address list type parameters in "Routing" menu;
fixed content filtering in "Tools/Packet Sniffer/Packets" menu;
fixed entry order in "Tools/Packet Sniffer/Packets" menu;
fixed error message when adding NTH rule with "0" value;
fixed minor typo under "LTE" interface menu;
fixed switch related settings for MT7621 switch chip (hEX, hEX S, RBM33G, RBM11G, LtAP);
made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
made "Routing Filters/Rules" table sortable;
made OSPF interface type names consistent between CLI and GUI;
moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
moved IPv4 and IPv6 "Rules" menus under "Routing" menu;
properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
properly save "IPv6/Settings" menu in session file;
properly show "v" flag instead of "y" under "IP/Route" menu;
properly update ethernet auto negotiation status on CHR;
properly update server list under "System/NTP Client/Servers" menu;
renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
renamed "MBPS" to "Mbps" value unit name in "Tools/Traffic Generator" menu;
renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
report local terminal session as "local" instead of "telnet";
require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
require non empty "Packet Mark" value under "Queues" menu;
show "H" flag for offloaded connections in "IP/Firewall/Connections" menu;
show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
show "Routes" column by default under "PPP/Secrets" menu;
show "System/Health/Settings" only on boards that have configurable values;
show "System/SwOS" menu only on boards that have dual boot;
show additional columns by default for "Wireless" menu with WifiWave2 package;
sort "Address List" parameter values alphabetically in "IP/DHCP Server/Leases" menu;
updated default "Routing/BGP/Peer Cache" table appearance;
use "total" as default value for "Tools/Profile";

7.1.4 Stable 2022-Mar-21 (3 years ago)

added "VPN" tab to "Routing/BGP" menu;
added "VRF" parameter for "SSH" and "Telnet" menus;
do not show "Antenna Scan" button on devices that do not support it;

7.1.2 Stable 2022-Feb-03 (4 years ago)

added "VRF" parameter to "IP/Services" menu;
added MLAG support;
added ZeroTier support;
allow setting "Interface" parameter for 100G LED types;
do not show "Antenna Scan" button on devices that do not support it;
fixed "action" field in "IP/Web Proxy/Access" menu;
fixed address list type parameters in "Routing" menu;
made OSPF interface type names consistent between CLI and GUI;

6.49.3 Stable 2021-Dec-22 (4 years ago)

show "System/Health" only on boards that have health monitoring;

7.1.1 Stable 2021-Dec-21 (4 years ago)

made "Routing Filters/Rules" table sortable;
moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
updated default "Routing/BGP/Peer Cache" table appearance;

6.48.6 Long-term 2021-Dec-03 (4 years ago)

do not allow to add/remove W60G interfaces;

6.49.1 Stable 2021-Nov-17 (4 years ago)

added "Modbus" menu support;

6.49 Stable 2021-Oct-06 (4 years ago)

added "dhcp" option to "multicast-helper" setting;
added "fec-mode" parameter under "Interface/Ethernet" menu;
added "interface-speed-100G" LED type to "System/LEDs" menu;
added "name" and "file-name" parameter when importing and exporting certificates;
added "sfp-shutdown-temperature" setting to SFP interfaces;
added SSH settings under "IP/SSH" menu;
added TFTP settings under "IP/TFTP/Settings" menu;
allow setting MCS (24-31) to 4x4 Wireless interfaces;
do not allow to add/remove W60G interfaces;
do not allow to set empty "init-string" field under "System/GPS" menu;
do not show "GPS antenna" selection for devices without selection support;
fixed "Secondary Frequency" parameter setting under "CAPsMAN/Channel" menu;
fixed DNS "cache-size" parameter setting;
fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
fixed order of weekdays under "IP/Firewall" menu;
fixed support for "Delegated-IPv6-Prefix" for PPP services;
match "MAC Protocol-Num" predefined values under "Bridge/Filters" menu;
minimal required version is v3.30;
properly show "CRL Signature" field under "System/Certificate" menu;
separated CCQ Tx and Rx values in their own unique columns;
show "System/Health/Settings" only on boards that have configurable values;
show "current-channel" column by default for CAP interfaces;
show IPv6 address in separate field under "IP/Cloud" menu;

6.48.5 Long-term 2021-Sep-21 (4 years ago)

added "name" and "file-name" parameter when importing and exporting certificates;
allow setting MCS (24-31) to 4x4 Wireless interfaces;
do not allow to set empty "init-string" field under "System/GPS" menu;
do not show "GPS antenna" selection for devices without selection support;
show "System/Health/Settings" only on boards that have configurable values;
show "current-channel" column by default for CAP interfaces;

6.48.4 Stable 2021-Aug-18 (4 years ago)

added "Cloud Backup" options under "Files" menu;
added "interworking-profile" parameter under "Wireless" menu;
added support for PTP;
do not show "Functionality" field for LTE interface if it is not provided;
fixed "Switch" menu on RBwAPG;
fixed "vid" parameter under "Bridge/Hosts" menu;
show "System/Health" only on boards that have health monitoring;

6.47.10 Long-term 2021-May-31 (4 years ago)

do not show "network-mode" parameter for LTE interfaces that do not support it;
do not show empty "CPU Frequency" parameter under "System/Resources" menu;
fixed "reachable-time" value unit under "IPv6/ND" menu;
fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
fixed health reporting on RB960, hEX and hEX S devices;
hide "Allow Roaming" parameter on LTE modems that do not support it;
increased "target" field limit to 128 under "Queues" menu;
show "LCD" only on boards that have LCD;
show "System/Health" only on boards that have health monitoring;
show "activity" column by default under "IP/Kid Control/Devices" menu;

6.48.3 Stable 2021-May-25 (4 years ago)

fixed health reporting on RB960, hEX and hEX S devices;
show "System/Health" only on boards that have health monitoring;

6.48.2 Stable 2021-Apr-09 (4 years ago)

added "Channel" parameter under "System/Console" menu;
do not show empty "CPU Frequency" parameter under "System/Resources" menu;
fixed "reachable-time" value unit under "IPv6/ND" menu;
fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
hide "Allow Roaming" parameter on LTE modems that do not support it;
increased "target" field limit to 128 under "Queues" menu;
renamed IP protocol 41 to "ipv6-encap";
show "LCD" only on boards that have LCD;
show "System/Health" only on boards that have health monitoring;
show "activity" column by default under "IP/Kid Control/Devices" menu;

6.47.9 Long-term 2021-Feb-05 (4 years ago)

fixed enable/disable button presence for "Bridge/Hosts" menu;
renamed IP protocol 41 to "ipv6-encap";
show "System/Health" only on boards that have health monitoring;
use health values reported by gauges for "System/Health" menu;

6.48.1 Stable 2021-Feb-03 (5 years ago)

fixed enable/disable button presence for "Bridge/Hosts" menu;

6.48 Stable 2020-Dec-22 (5 years ago)

added "src-mac-address" parameter under "IP/DHCP-Server/Leases" menu;
added missing IGMP Snooping settings to "Bridge" menu;
added missing MSTP settings to "Bridge" menu;
added support for LTE Cell Monitor;
allow adding bonding interface with one slave interface;
allow performing "USB Power Reset" on "0" bus on RBM33G;
do not show "network-mode" parameter for LTE interfaces that do not support it;
fixed "IP->Kid Control->Devices" table automatic refreshing;
fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu;
fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
fixed "tls-version" parameter setting under "IP/Services" menu;
fixed minor typo in "Users" menu;
provide sane default values for bridge "VLAN IDs" parameter;
use health values reported by gauges for "System/Health" menu;

6.47.8 Stable 2020-Nov-25 (5 years ago)

added "operator" parameter under "Interface/LTE" menu;
added "reformat-hold-button-max" parameter under "System/RouterBOARD/Settings" menu;
added "tls-mode" parameter under "CAPsMAN/Security Cfg." menu;
added "tx-rx-1024-max" counter under "Interface/Overall-Stats" for CRS3xx devices;
do not allow MAC address changes on LTE interfaces;
show "System/Health" only on boards that have health monitoring;
show "System/RouterBOARD/Mode Button" on devices that have such feature;
show "usb-bus" option on all boards that have it;
show "usb-type" option on all boards that have it;
sort IPv6 firewall "chain" parameter entries alphabetically;

6.46.7 Long-term 2020-Sep-07 (5 years ago)

added "region" parameter for W60G interfaces;
allow to specify any Ethernet like interface under "Tool/WoL" menu;
do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
fixed wireless sniffer parameter setting;
hide irrelevant switch port parameters;

6.47.1 Stable 2020-Jul-08 (5 years ago)

fixed flag displaying under "IP/DNS/Static" table;
fixed minor typo in "BGP/Peer" menu;
hide irrelevant switch port parameters;

6.47 Stable 2020-Jun-02 (5 years ago)

added "Rate" parameter for switch ACL rules;
added "auth-info" parameter under "Dot1X->Active" menu;
added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server;
added "auto-erase" option to "Tool/SMS" menu;
added "bus" parameter for "USB Power Reset" command on NetMetal ac^2;
added "bus" parameter for "USB Power Reset" command on RBM33G;
added "comment" parameter and "dynamic" flag support under "Switch->Rule" table;
added "comment" parameter for Dot1X client;
added "region" parameter for W60G interfaces;
added "skip-dfs-channels" parameter to wireless interface menu;
added comment support for "Switch->VLAN" menu;
added enable and disable buttons for "MPLS->MPLS Interface" table;
added support for inline bar graphs for LTE signal values;
aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required);
allow setting "Primary" parameter for "balance-tlb" bonding interfaces;
allow to specify any Ethernet like interface under "Tool/WoL" menu;
do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
fixed "BGP Origin" value display under "IPv6->Routes" menu;
fixed "Data Rate" checkbox alignment (WinBox v3.22 required);
fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
fixed WDS usage when connecting to RouterOS access point using QuickSet;
fixed bonding type interface support for "Switch->Host" table;
fixed dates and times in interface link up/down properties (WinBox v3.24 required);
fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
fixed wireless sniffer parameter setting;
limit number of simultaneous WinBox sessions to 5 for users without "write" permission;
made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area;
removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";
renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
show "Hardware Offload" parameter for bonding interfaces;
updated icon design;

6.45.9 Long-term 2020-Apr-30 (5 years ago)

added "Options" parameter support for DHCPv6 client and server;
added 160Mhz extension channel support for CAPsMAN;
added support for "Tools->WoL" menu;
do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
fixed "Bands" parameter display for LTE interfaces;
fixed "DSCP" parameter value setting;
fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
fixed "Switch" menu on CRS354-48P-4S+2Q+;
fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
fixed "invalid" flag presence under "System/Certificates/CRL" menu;
fixed automatic "IPv6->Firewall->Address List" table update;
increased limit of multi-entry fields to 100;
made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.46.6 Stable 2020-Apr-27 (5 years ago)

fixed memory leak (introduced in v6.46.4);
increased limit of multi-entry fields to 100;

6.46.5 Stable 2020-Apr-07 (5 years ago)

added "Options" parameter support for DHCPv6 client and server;
added 160Mhz extension channel support for CAPsMAN;
added support for "Tools->WoL" menu;
allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
fixed "Bands" parameter display for LTE interfaces;
fixed "DSCP" parameter value setting;
fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
fixed "Switch" menu on CRS354-48P-4S+2Q+;
fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
fixed automatic "IPv6->Firewall->Address List" table update;
made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.46.4 Stable 2020-Feb-21 (5 years ago)

completely removed old style authentication method;
fixed "invalid" flag presence under "System/Certificates/CRL" menu;

6.46.3 Stable 2020-Jan-28 (6 years ago)

removed duplicate "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";

6.45.8 Long-term 2020-Jan-23 (6 years ago)

automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
show "LCD" menu only on boards that have LCD screen;

6.46.2 Stable 2020-Jan-14 (6 years ago)

automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
fixed "Default Route Distance" default value when creating new LTE APN;
removed duplicate "join-eui" and "dev-eui" parameters under "Lora/Traffic";

6.46.1 Stable 2019-Dec-13 (6 years ago)

fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu;
show "LCD" menu only on boards that have LCD screen;

6.46 Stable 2019-Dec-02 (6 years ago)

added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu;
added "public-address-ipv6" parameter to "IP/Cloud" menu;
added "reset-counters" button to "IP/Kid Control/Devices" menu;
added "tx-info-field" parameter to "Wireless/W60G" menu;
added "Vendor Classes" tab in "IP/DHCP Server" menu;
added wireless alignment LED types to "System/LEDs" menu;
fixed allowed range for bridge filter "new-priority" parameter;
fixed "CAPs Scanner" stopping;
fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu;
fixed file locking when uploading multiple files at once;
fixed firewall limit parameter support for rates more than 4G;
fixed invalid flag presence in "IP/SMB/Shares" menu;
fixed "Routing" menu icon presence when there is no routing package installed;
improved stability when transfering multiple files between multiple windows;
properly show timestamp in file "Creation Time" field;
removed "Set CA Passphrase" button from "Certificate" menu;
renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters;
replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu;
show "Switch" menu on RBwAPGR-5HacD2HnD;
show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.45.7 Stable 2019-Oct-24 (6 years ago)

show SFP tab for QSFP interfaces;

6.44.6 Long-term 2019-Oct-24 (6 years ago)

added "auto-erase" parameter to "Tools/SMS" menu;
added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
added "revision" parameter to "System/Routerboard" menu;
removed "max-sms" parameter from "Tools/SMS" menu;

6.45.5 Stable 2019-Aug-26 (6 years ago)

added "auto-erase" parameter to "Tools/SMS" menu;
added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
added "revision" parameter to "System/Routerboard" menu;
removed "max-sms" parameter from "Tools/SMS" menu;

6.44.5 Long-term 2019-Jul-04 (6 years ago)

do not allow setting "dns-lookup-interval" to "0";

6.45.1 Stable 2019-Jun-27 (6 years ago)

added "System/SwOS" menu for all dual-boot devices;
do not allow setting "dns-lookup-interval" to "0";
show "LCD" menu only on boards that have LCD screen;

6.43.15 Long-term 2019-May-10 (6 years ago)

improved file handling;
show "R" flag under "IPv6/DHCP Server/Bindings" tab;

6.44.1 Stable 2019-Mar-13 (6 years ago)

added "use-local-address" parameter in "IP/Cloud" menu;

6.43.13 Long-term 2019-Mar-13 (6 years ago)

added "conflict-detection" parameter in "IP/DHCP Server" menu;
added "coordinate-format" parameter in LTE interface settings;
added "use-local-address" parameter in "IP/Cloud" menu;
allow specifying interface lists in "CAPsMAN/Access List" menu;
fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
fixed "LCD" menu not shown on RB2011UiAS-2HnD;
moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.44 Stable 2019-Feb-25 (6 years ago)

added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
added "allow-dual-stack-queue" parameter in "IP/DHCP Server" and "IPv6/DHCP Server" menus;
added "challenge-password" field when signing certificate with SCEP;
added "conflict-detection" parameter in "IP/DHCP Server" menu;
added "coordinate-format" parameter in LTE interface settings;
added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
added src/dst address and in/out interface list columns to default firewall menu view;
added support for dynamic devices in "IP/Kid Control/Devices" tab;
allow setting "network-mode" to "auto" under LTE interface settings;
allow specifying interface lists in "CAPsMAN/Access List" menu;
fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
fixed L2MTU parameter setting on "W60G" type interfaces;
fixed "LCD" menu not shown on RB2011UiAS-2HnD;
fixed missing w60g interface status values;
improved file handling;
moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
organized wireless parameters between simple and advanced modes;
renamed "Default AP Tx Rate" to "Default AP Tx Limit";
renamed "Default Client Tx Rate" to "Default Client Tx Limit";
show "R" flag under "IPv6/DHCP Server/Bindings" tab;
show "System/RouterBOARD/Mode Button" on devices that have such feature;
show "W60G" wireless tab on wAP 60G AP;

6.43.8 Stable 2018-Dec-21 (7 years ago)

added "allow-roaming" parameter in "Interface/LTE" menu;
allow to change VHT rates when 5ghz-n/ac band is used;
renamed "Radius" to "RADIUS";
show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+;

6.42.11 Long-term 2018-Dec-21 (7 years ago)

allow to change VHT rates when 5ghz-n/ac band is used;
renamed "Radius" to "RADIUS";
show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+;

6.43.7 Stable 2018-Nov-30 (7 years ago)

allow to specify SIM slot on LtAP mini;
enabled "fast-forward" by default when adding new bridge;
fixed neighbor discovery for IPv6 neighbors;
show "System/Health" only on boards that have health monitoring;

6.42.10 Long-term 2018-Nov-14 (7 years ago)

allow to specify SIM slot on LtAP mini;
enabled "fast-forward" by default when adding new bridge;
show "System/Health" only on boards that have health monitoring;
show "W60G" wireless tab on wAP 60G AP;

6.42.9 Long-term 2018-Sep-27 (7 years ago)

show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.43.1 Stable 2018-Sep-17 (7 years ago)

added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
fixed corrupt user database after specifying allowed address range (introduced in v6.43);
make bridge port "untrusted" by default when creating new port;
show "IP/Cloud" menu on CHR;
show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.43 Stable 2018-Sep-06 (7 years ago)

added bridge Fast Forward statistics counters;
added "poe-fault" LED trigger;
added "tag-stacking" option to "Bridge/Ports";
allow to specify LTE interface when sending SMS;
fixed arrow key handling within table filter fields;
fixed "bad-blocks" value presence under "System/Resources";
fixed bridge port MAC learning parameter values;
fixed "IP/IPsec/Peers" section sorting;
fixed "write-sect-since-reboot" value presence under "System/Resources";
properly close session when uploading multiple files to the device at the same time;
removed duplicate "20/40/80MHz" value from "channel-width" setting options;
renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
show HT MCS tab when "5ghz-n/ac" band is used;
show "Switch" menu on hAP ac^2 devices;
show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.40.9 Long-term 2018-Aug-20 (7 years ago)

added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
allow to specify full URL in SCEP certificate signing process;
by default specify keepalive timeout value for tunnel type interfaces;
show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
show "scep-url" for certificates;
show "sector-writes" on ARM devices that have such counters;
show "sector-writes" on devices that have such counters;
show "System/Health" only on boards that have health monitoring;

6.42.7 Stable 2018-Aug-17 (7 years ago)

added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
fixed "sfp-connector-type" value presence under "Interface/Ethernet";
fixed warning presence for "IP/IPsec/Peers" menu;
properly display all flags for bridge host entries;
show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.42.6 Stable 2018-Jul-06 (7 years ago)

added 64,8 GHz frequency to w60g interface frequency settings;
show "sector-writes" on devices that have such counters;

6.42.5 Stable 2018-Jun-26 (7 years ago)

show "sector-writes" on ARM devices that have such counters;
show "System/Health" only on devices that have health monitoring;

6.42.4 Stable 2018-Jun-15 (7 years ago)

added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
allow to specify full URL in SCEP certificate signing process;
by default specify keepalive timeout value for tunnel type interfaces;
show "scep-url" for certificates;
show "System/Health" only on boards that have health monitoring;
show firmware upgrade message at the bottom of "System/RouterBOARD" menu;

6.42.2 Stable 2018-May-17 (7 years ago)

allow to specify "any" as wireless "access-list" interface;
fixed "/ip dhcp-server network set dns-none" parameter;

6.42.1 Stable 2018-Apr-23 (7 years ago)

fixed bridge port MAC learning parameter values;
show "Switch" menu on cAP ac devices;
show correct "Switch" menus on CRS328-24P-4S+;

6.40.8 Long-term 2018-Apr-23 (7 years ago)

show "Switch" menu on cAP ac devices;

6.42 Stable 2018-Apr-13 (7 years ago)

added "antenna" setting under GPS settings for MIPS platform devices;
added "crl-store" setting to certificate settings;
added "insert-queue-before" to DHCP server;
added "use-dn" setting in OSPF instance General menu;
added 160 MHz "channel-width" to wireless settings;
added DHCPv6 client info request type and updated statuses;
added missing protocol numbers to IPv4 and IPv6 firewall;
added possibility to delete SMS from inbox;
allow to comment new object without committing it;
allow to open bridge host entry;
fixed name for "out-bridge-list" parameter under bridge firewall rules;
fixed typo from "UPtime" to "Uptime";
fixed Winbox closing when viewing graph which does not contain any data;
improved stability when using trackpad scrolling in large lists;
made UDP local and remote TX size parameters optional in Bandwidth Test tool;
moved "ageing-time" setting from STP to General tab;
moved OSPF instance "routing-table" setting in OSPF instance General menu;
removed “VLAN” section from “Switch” menu for CRS3xx devices;
show Bridge Port PVID column by default;
show CQI in LTE info;
show dual SIM options only for RouterBOARDS which does have two SIM slots;
show only master CAP interfaces under CAPsMAN wireless scan tool;
use proper graph name for HDD graphs;

6.41.4 Stable 2018-Apr-05 (7 years ago)

made UDP local and remote TX size parameters optional in Bandwidth Test tool;
show dual SIM options only for RouterBOARDs which does have two SIM slots;
use proper graph name for HDD graphs;

6.40.7 Long-term 2018-Mar-29 (7 years ago)

fixed "/tool e-mail send" attachment behavior;
fixed maximal ID for Traffic Generator stream;
made UDP local and remote TX size parameter optional in Bandwidth Test tool;
removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
show "D" flag under "/ip dhcp-client" menu;
use proper graph name for HDD graphs;

6.41.3 Stable 2018-Mar-08 (7 years ago)

fixed "/tool e-mail send" attachment behavior;
fixed maximal ID for Traffic Generator stream;
removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
show "D" flag under "/ip dhcp-client" menu;

6.40.6 Long-term 2018-Feb-20 (7 years ago)

allow to specify "to-ports" for "action=masquerade";

6.41.2 Stable 2018-Feb-06 (7 years ago)

changed default bridge port PVID value to 1;

6.41.1 Stable 2018-Jan-30 (8 years ago)

added "dhcp-option-set" to DHCP server;
allow to specify "to-ports" for "action=masquerade";
do not show "hw" option on non-Ethernet interfaces;
do not show VLAN related settings in switch port menu on CRS3xx boards;

6.41 Stable 2017-Dec-22 (8 years ago)

added "W60G station" tab in Wireless menu;
added "notrack-chain" setting to IPSec peers;
added support for "_" symbol in terminal window;
added switch menu on RB1100AHx4;
do not show MetaROUTER stuff on RB1100AHx4;
do not show duplicate "Switch" menus for CRS326;
do not show duplicate "Template" parameters for filter in IPSec policy list;
do not show duplicate filter parameters "Published" in ARP list;
do not show unnecessary tabs from "Switch" menu;
fixed "/certificate sign" process;
fixed bridge port sorting order by interface name;
show warnings under "/system routerboard settings" menu;

6.40.5 Stable 2017-Oct-31 (8 years ago)

allow shorten bytes to k,M,G in Hotspot user limits;

6.39.3 Long-term 2017-Oct-12 (8 years ago)

added possibility to define "comment" for "/routing bgp network" entries;
added support for certificate CRL list;
do not show LCD menu for devices which does not have it;
fixed ARP table update after entry changes state to incomplete;
hide "level" and "tunnel" parameters for IPSec policy templates;
hide FAN speed if it is 0RPM;
make IPSec policies table an ordered list;
properly show "dhcp-server" warnings;
show "/interface wireless cap print" warnings;
show "/system health" only on boards that have health monitoring;
show "D" flag under "/interface mesh port" menu;

6.40.3 Stable 2017-Sep-01 (8 years ago)

added possibility to define "comment" for "/routing bgp network" entries;
do not show FAN related information under "/system health" menu for devices which does not have it;
do not show LCD menu for devices which does not have it;
fixed ARP table update after entry changes state to incomplete;

6.40.2 Stable 2017-Aug-08 (8 years ago)

added certificate settings;
added support for certificate CRL list;
do not show LCD menu for devices which does not have it;
hide "level" and "tunnel" parameters for IPSec policy templates;
hide FAN speed if it is 0RPM;

6.40.1 Stable 2017-Aug-03 (8 years ago)

added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;

6.38.7 Long-term 2017-Jun-20 (8 years ago)

added "Flush" button under “unicast-fdb” menu;
added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" Sniffer parameters;
added “protected-routerboard” parameters under RouterBOARD settings menu;
allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
do not allow to open multiple same sub-menus at the same time;
do not show "dpd-max-failures" on IKEv2;
do not start Traffic Generator automatically when opening "Quick Start";
fixed "Montly" typo to "Monthly" in Graphing menu;
fixed firewall port selection with Winbox v2;
fixed IPSec "mode-config" DNS settings;
fixed issue when working IPSec policies were shown as invalid;
fixed switch ACL Policer statistics;
fixed typo in BGP advertisements menu Aggragator->Aggregator;
hide "wps-mode" & "security-profile" in wireless nv2 mode;
properly show "dhcp-server" warnings;
removed spare values from "loop-protect" setting for EoIPv6 tunnels;
removed unnecessary "/system health" menu on "hAP ac lite" and “RB450”;
show "A" flag for IPSec policies;

6.39.2 Stable 2017-Jun-01 (8 years ago)

do not allow to open multiple same sub-menus at the same time;
fixed firewall port selection with Winbox v2;
fixed LTE info button;
removed spare values from "loop-protect" setting for EoIPv6 tunnels;

6.39 Stable 2017-Apr-27 (8 years ago)

added "Flush" button under unicast-fdb menu;
added "group-key-update" to CAPsMAN security settings;
added "k" and "M" unit support to PPP secret limit-bytes parameters;
added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" parameters;
added "save-selected" setting under CAPsMAN channels;
added "static-virtual" to wireless CAP;
added GPS menu;
added protected routerboard parameters under routerboard settings menu;
allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
allow to change user password to empty one;
allow to not specify certificate in IPSec peer settings;
allow to specify "route-distance" in "dhcp-client" if "special-classless" mode is selected;
allow to specify certificate type when exporting it;
allow to specify interfaces that CAPsMAN can use for management;
allow unhide SNMP passwords;
allowed to specify static-dns as list;
do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
do not create time field when copying CAPsMAN access list entry;
do not show "dpd-max-failures" on IKEv2;
do not show empty LTE fields in Info menu;
do not start Traffic Generator automatically when opening "Quick Start";
do not try to disable dynamic items from firewall tables;
fixed "Montly" typo to "Monthly" in Graphing menu;
fixed CAPsMAN channels frequency (allow to specify a list of them);
fixed IPSec "mode-config" DNS settings;
fixed issue when working IPSec policies were shown as invalid;
fixed misleading error when trying to export certificate;
fixed typo in BGP advertisements menu Aggragator->Aggregator;
hide "wps-mode" & "security-profile" in wireless nv2 mode;
hide health menu on RB450;
improved "/tool torch";
increased maximal number of Winbox sessions 20->100;
properly name CAP Interface on new interface creation;
properly show "dhcp-server" warnings;
properly show IPSec "installed-sa" "enc-algorithm" when it is aes-gcm;
properly show wireless registration table stat counters;
removed "sfp-rate-select" setting from ethernet interface;
removed unnecessary "/system health" menu on "hAP ac lite";
set default "dhcp-client" "default-route-distance" value to 1;
show "A" flag for IPSec policies;
show "H" flag for IPSec installed SAs;
show PoE-OUT current, voltage and power only on devices which can report these values;

6.37.5 Long-term 2017-Mar-09 (8 years ago)

added "add-relay-info" and "relay-info-remote-id" to DHCP relay;
added H flag to "/ip arp" ;
added missing "use-fan2" and "active-fan2" to "/system health";
allow shorten bytes to k,M,G in bridge firewall just like in “/ip firewall”;
do not hide "power-cycle-after" option;
do not hide 00:00:00:00:00:00 MAC address in unpublished ARPs;
fixed matching "connection-state=untracked" connections;
fixed typo in “/system resources pci” list;
hide advertise tab in Hotspot user profile configuration if "transparent-proxy" is not enabled;
make "power-cycle-after" show correct value;
make "power-cycle-interval" not to depend on "power-cycle-ping-enabled" in PoE settings;
properly show BGP communities in routing filters table filter;

6.38.4 Stable 2017-Mar-08 (8 years ago)

do not hide "power-cycle-after" option;
hide advertise tab in Hotspot user profile configuration if "transparent-proxy" is not enabled;
make "power-cycle-interval" not to depend on "power-cycle-ping-enabled" in PoE settings;
properly show BGP communities in routing filters table filter;

6.38.3 Stable 2017-Feb-07 (8 years ago)

added "add-relay-info" and "relay-info-remote-id" to DHCP relay;
added H flag to "/ip arp" ;
added missing "use-fan2" and "active-fan2" to "/system health";
allow shorten bytes to k,M,G in bridge firewall just like in “/ip firewall”;
do not hide 00:00:00:00:00:00 MAC address in unpublished ARPs;
fixed matching "connection-state=untracked" connections;
fixed typo in “/system resources pci” list;
make "power-cycle-after" show correct value;
updated fan management menu;

6.38.1 Stable 2017-Jan-13 (9 years ago)

added "make-static" to IPv6 DHCP server bindings;
added "prefix-pool" to DHCPv6 server binding;
added IPsec to radius services;
added upstream flag to IGMP proxy interfaces;
allow to specify "connection-bytes" & "connection-rate" for any protocol in “/ip firewall” rules;
allow to specify "sip-timeout" under ip firewall service-ports;
do not create empty rates.vht-basic/supported-mcs if not specified in CAPsMAN;
hide "nat-traversal" setting in IPsec peer if IKEv2 is selected;
show dynamic IPv6 pools properly;
show errors on IPv6 addresses;
specify metric for “/ip dns cache-used” setting;

6.37.4 Long-term 2017-Jan-13 (9 years ago)

added "Complete" flag to arp table;
added "make-static" to IPv6 DHCP server bindings;
added "prefix-pool" to DHCPv6 server binding;
added upstream flag to IGMP proxy interfaces;
allow to enable/disable traffic flow targets;
allow to specify "connection-bytes" & "connection-rate" for any protocol in “/ip firewall” rules;
allow to specify "sip-timeout" under ip firewall service-ports;
do not allow to set "loop-protect-send-interval" to 0s;
do not create empty rates.vht-basic/supported-mcs if not specified in CAPsMAN;
fixed crash when legacy Winbox version was used;
fixed default values for interface "loop-protect-disable-time" and "loop-protect-send-interval";
fixed missing "IPv6/Settings" menu;
fixed typo in "propagate-ttl" setting;
properly show VHT basic and supported rates in CAPsMAN;
show all related HT tab settings in 2GHz-g/n mode;
show dynamic IPv6 pools properly;
show errors on IPv6 addresses;
show proper ipv6 connection timeout;
specify metric for “/ip dns cache-used” setting;

6.38 Stable 2016-Dec-30 (9 years ago)

added "Complete" flag to arp table;
added "untracked" option to firewall "connection-state" setting;
added Dude icon to Dude menu;
allow to enable/disable traffic flow targets;
allow to run profile from "/system resources" menu;
allow to specify interface for leds with "interface-speed" trigger;
do not allow to set "loop-protect-send-interval" to 0s;
do not show hotspot user profile incoming and outgoing filters and marks as set if there is no value specified;
fixed crash when legacy Winbox version was used;
fixed default values for interface "loop-protect-disable-time" and "loop-protect-send-interval";
fixed missing "IPv6/Settings" menu;
fixed typo in "propagate-ttl" setting;
make cert signing include provided ca-crl-host;
moved ipsec peer "exchange-mode" to General tab;
properly show VHT basic and supported rates in CAPsMAN;
removed spare values from loop-protect menu;
show all related HT tab settings in 2GHz-g/n mode;
show primary and secondary ntp addresses as 0.0.0.0 if none are set;
show proper ipv6 connection timeout;

6.37.3 Stable 2016-Nov-28 (9 years ago)

recognize properly tcp in traffic-generator packet-template header type;
show HT MCS tab if 2GHz-G/N band is used;

6.37.2 Stable 2016-Nov-08 (9 years ago)

added led settings menu;
fixed missing switch menu for mmips devices;

6.37.1 Stable 2016-Sep-30 (9 years ago)

added loop-protect settings;
added passthrough state to web-proxy;
allow to unset http-proxy field for sstp client;
do not show health menu on RB951-2n;
fixed typo in dhcpv6 relay (DCHP to DHCP);
show address expiration time in dhcp client list;

6.37 Stable 2016-Sep-23 (9 years ago)

added auto refresh for BFD neighbors;
added comment field support for switch vlan menu;
added default-authentication parameter for wireless station modes;
added src-address field for traffic-flow target;
adjust on-event field dynamically depending on window size;
adjusted allowed values for http-proxy field;
disabled MRRU by default for PPP interfaces;
display actual-mtu for tunnels in interfaces window;
fixed disconnect when no windows were opened for a while in unsecure mode;
fixed multiline read only fields not displaying new line characters;
fixed raw firewall showing jump targets from filter chains;
hide ethernet flow control settings for interfaces which does not support them;
removed health menu from devices that do not support it;
removed L2MTU field for PPP interfaces;
removed L2MTU field from PPP server binding settings;
removed unset button for L2MTU field;
show firmware-type in routerboard window;

6.36.2 Stable 2016-Aug-22 (9 years ago)

make queue tree default queue type default-small;

6.36 Stable 2016-Jul-20 (9 years ago)

added 2ghz-g/n band for wireless-rep;
added icons to bridge filter actions similar to ip firewall;
added support for ipv6 dhcp relay;
allow to reorder hotspot walled-garden & walled-garden-ip rules;
do not allow to specify vlan-mode=no-tag in capsman datapath config;
do not show filter for combined fields like bgp-vpn4 RD;
do not show mode setting for WDS interfaces;
fixed crash on disconnect in secure mode;
fixed crash when using ctrl+d;
fixed safe mode;
improve filtering on list fields;
report correctly dude users in active users list;
set default sa-learning value to "yes" for CRS Ingress VLAN Translation rules;
show action column as first in bridge firewall;
show error when telnet is not allowed because of permissions;

6.34.5 Long-term 2016-May-27 (9 years ago)

show voltage in Health only if there actually is voltage monitor;

6.35.1 Stable 2016-Apr-25 (9 years ago)

show voltage in Health only if there actually is voltage monitor;

6.35 Stable 2016-Apr-14 (9 years ago)

increased minimal required winbox version to 3.4;
added "pw-type" to "/interface vpls bgp-vpls" menu;
added "use-control-word" and "pw-mtu" to "/interface vpls cisco-bgp-vpls" menu;
added /interface wireless setup-repeater;
added all the rates settings to the capsman;
added flip-screen option to lcd settings;
added init-delay option to routerboard settings;
added ipv6 firewall missing log option;
added missing eap-ttls-mschamv2 method to wireless security profile;
added mtu=auto support to eoipv6 tunnel;
added sfp-mac for GPON interfaces;
added support for new settings from wireless-rep package;
added support for route action in mangle rules;
allow to set additional-network-modes;
allow to set multiple dh-groups;
disable autostart for wireless scan,snooper,align etc. on open;
do not show "enable-jumper-reset" setting on devices without serial port;
do not show real-tx-power column in current-tx-power by default;
fixed unset options in /routing ospf interface menu;
hotspot default-trial user shows profile as "unknown" in Winbox;
improved winbox connection loss detection, fixes winbox safe mode;
limit ospf key to 16 symbols;
make additional-network-mode optional for lte interface;
make build with latest lte changes;
make mrru disabled and set mtu+mru to auto by default on new servers;
show "usb-power-reset" option on all boards that have it;

6.34.4 Stable 2016-Mar-24 (9 years ago)

allow to show revoked & authority flags at the same time;
correctly recognise if there is need to report fan information under system health;
do not use area v2 names instead of ospf v3 area names;
make mac-winbox work with RB850.

6.34.3 Stable 2016-Mar-09 (9 years ago)

allow to set multiple dh-groups;
do not show fan statuses in passive cooling CCR1009;
fixed typo in "echo reply";
fixed unset options in /routing ospf interface menu;

6.34.2 Stable 2016-Feb-18 (9 years ago)

added factory-firmware field to system/routerboard;
fixed email address saving;
fixed multi value field display (i.e. web proxy ports);
fixed incomplete ARP entries are not refreshed;

6.32.4 Long-term 2016-Feb-09 (9 years ago)

added + & - to IGMP proxy MFC;
allow to specify traffic-monitor threshold in k & M units + specify that those are bits;
do not send any changes on OK button press if nothing has been changed;
fixed tab names to correspond to console;
renamed power-cycle-ping-interval to power-cycle-ping-timeout;
show dhcp server name in dhcp leases;
show fast-path per interface counters;
show only actual switch-cpu ports in switch setting combobox;
show properly route-distinguisher for bgp vpn4;

6.34 Stable 2016-Jan-29 (10 years ago)

fixed possible busy-loop on v2.x with latest 6.34RC versions;
add extra items automatically to multi-line fields if at least one of them is required;
implemented full ipv6 dhcp client;
update blocked flag if user changed blocked field in dhcp server lease;
include FP in fast-path column names;
allow to specify amsdu-limit & amsdu-threshold on 11n wifi cards;
added multicast-buffering & keepalive-frames settings to wireless interfaces;
show Common-Name of certificates in certificate list;
added units to PCQ queue fields;

6.33.5 Stable 2015-Dec-28 (10 years ago)

added + & - to IGMP proxy MFC;
added LCD menu for RB3011;
allow to specify traffic-monitor threshold in k & M units + specify that those are bits;
show fast-path per interface counters.

6.33.1 Stable 2015-Nov-17 (10 years ago)

do not send any changes on OK button press if nothing has been changed;
renamed power-cycle-ping-interval to power-cycle-ping-timeout;

6.33 Stable 2015-Nov-06 (10 years ago)

dropped support for winbox v3.0beta and v3.0rc (use winbox v3.0);
added allow-fast-path to eoip, gre & ipip;
do not show power-cycle properties on non poe ports;
make sure that all setting names get shown in full;
added poe power-cycle-ping settings to ethernet interfaces;
added vlan-mode & vlan-id to virtual-ap interface;
added timeout column to ipv6 address lists;
show SFP Tx/Rx Power properly;
added min-links to bonding interface;
do not show health menu on RB951Ui-2HnD;
added support for Login-Timeout & MAC-Auth-Mode in hotspot;
make user ssh key import work again;
fix to allow cpu-port as mirror-target
allow to specify dns name in all the tunnels;
make directed broadcasts work for neighbor discovery;

6.32.3 Long-term 2015-Oct-19 (10 years ago)

Shift+Ins & Shift+Del did not work in multi entry fields;
allow to specify ipv6 address in traffic flow target;
allow to specify eap-radius-accounting in CAPsMAN;
allow to enter dns name in email server;
make console notice correct screen size;
refetch hotspot walled garden hit counter;
added client-connections & server-connections to web proxy status;
fixed context menu actions to apply to all selected items;

6.32 Stable 2015-Aug-31 (10 years ago)

fixed wireless interface l2mtu (VirtualAP and WDS interface creation in winbox)
fixed multiple firewall rule moving in Winbox 2

6.30.2 Long-term 2015-Jul-22 (10 years ago)

restrict reversed ranges in dst-port under firewall

6.21 Stable 2014-Oct-30 (11 years ago)

added filtering by dscp to torch;

6.19 Stable 2014-Aug-26 (11 years ago)

added dual PSU stats in health menu

6.6 Stable 2013-Nov-07 (12 years ago)

fixed problem where all previous session opened windows were read only;

6.5 Stable 2013-Oct-16 (12 years ago)

fixed problem where all settings were read only on first open;

6.4 Stable 2013-Sep-12 (12 years ago)

fixed problem where ipv6 routes with non local link address gateway

6.2 Stable 2013-Aug-02 (12 years ago)

added ability to fully set up traffic generator in winbox;

6.1 Stable 2013-Jun-12 (12 years ago)

fixed problem Switch menu disappeared on RB2011;

5.21 Stable 2012-Oct-12 (13 years ago)

added ability to add time & date to dashboard;

5.17 Stable 2012-May-28 (13 years ago)

fixed packet raw data view in packet sniffer;
fixed problem when router could be DoS attacked through winbox port;

5.14 Stable 2012-Feb-22 (13 years ago)

fixed problem when changing main winbox window size and some of the inner windows

5.12 Stable 2012-Jan-19 (14 years ago)

reorganized window layout to match console better;

5.8 Stable 2011-Nov-01 (14 years ago)

now copied item in ordered list is added right after it's original;

Activity over time (changelog entries per month)