Version: 6.39
Stable247 changelog entries across 50 component(s)
2017-Apr-27 (8 years ago)
| Component | Change |
|---|---|
| address | fixed crash when address is assigned to another bridge port; |
| api | fixed double dynamic flags for "/ip firewall address-list print"; |
| capsman | added "extension-channel" XX and XXXX auto matching modes; |
| capsman | added "keepalive-frames" setting; |
| capsman | added "skip-dfs-channels" setting; |
| capsman | added CAP discovery interface list support; |
| capsman | added DFS support; |
| capsman | added EAP identity to registration table; |
| capsman | added ability to specify multiple channels in frequency field; |
| capsman | added save-channel option to speed up frequency selection on CAPsMAN restart; |
| capsman | added support for "background-scan" and channel "reselect-interval"; |
| capsman | added support for static virtual interfaces on CAP; |
| capsman | changed channel "width" name to "control-channel-width" and changed default values; |
| capsman | improved CAP status querying; |
| capsman | improved support for communicating frame priority between CAP and CAPsMAN; |
| certificate | SCEP client now supports FQDN URL and port; |
| certificate | allow CRL address to be specified as DNS name; |
| console | fixed "/ip neighbor discovery" export; |
| console | fixed DHCP/PPP add-default-route distance minimal value to 1; |
| console | fixed crash; |
| console | fixed incorrect ":put [/lcd get enabled]" value; |
| ddns | improved "dns-update" authentication validation; |
| defconf | fixed Groove 52 ac band settings; |
| defconf | fixed default configuration generation when wireless package is disabled; |
| dhcp-client | added "script" option which executes script on state changes; |
| dhcpv4 | fixed string option parser; |
| dhcpv4-server | added "lease-hostname" script parameter; |
| dhcpv4-server | by default make server authoritative; |
| dhcpv4-server | do some lease checks only on enabled object; |
| discovery | fixed LLDP discovery, IPv6 address was not parsed correctly; |
| dude | (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=21&t=116471); |
| check for errors during SMTP exchange process; | |
| ethernet | added "voltage-too-low" status for single port power injector devices; |
| ethernet | fixed "loop-protect" on "master-port"; |
| ethernet | fixed rare switch chip hang (could cause port flapping); |
| ethernet | fixed unnecessary power cycle of powered device when changing any poe-out related setting on single port power injector devices; |
| ethernet | renamed "rx-lose" to "rx-loss" in ethernet statistics; |
| ethernet | reversed poe-priority on hEX PoE and OmniTIK 5 PoE to make "poe-priority" consistent to all other RouterOS priorities; |
| fastpath | fixed rare crash on devices with dynamic interfaces; |
| fetch | added "http-data" and "http-method" parameters to allow delete, get, post, put methods (content-type=application/x-www-form-urlencoded by default); |
| fetch | fixed authentication failure; |
| fetch | fixed download issue over HTTPS; |
| gps | added "fix-quality" and "horizontal-dilution" parameters; |
| graphing | fixed graph disappearance after power outage; |
| hotspot | added access to HTTP headers using $(http-header-name); |
| ike1 | fixed ph2 ID logging; |
| ike2 | allow multiple child SA traffic selectors on re-key; |
| ike2 | always replace empty TSi with configured address if it is available; |
| ike2 | check child state before allowing rekey; |
| ike2 | default to /32 peer address mask; |
| ike2 | fixed CTR mode; |
| ike2 | fixed EAP message length; |
| ike2 | fixed ISA handler object removal on SA delete; |
| ike2 | fixed RSA authentication without EAP; |
| ike2 | fixed disabled DPD; |
| ike2 | fixed last EAP auth payload type; |
| ike2 | fixed ph2 state when sending notify; |
| ike2 | fixed policy release during SA negotion; |
| ike2 | fixed state when sending delete packet; |
| ike2 | improved logging; |
| ike2 | kill only child SAs which are not re-keyed by remote peer; |
| ike2 | log RADIUS timeout message under error topic; |
| ike2 | remove old SA after rekey; |
| ike2 | send EAP identity as user-name RADIUS attribute; |
| ike2 | update "calling_station_id" RADIUS attribute; |
| ike2 | update peer identity after successful EAP authentication; |
| ippool | return proper error message when trying to create duplicate name; |
| ipsec | added "last-seen" parameter to active connection list; |
| ipsec | allow mixing aead algorithms in proposal; |
| ipsec | better responder flag calculator for console; |
| ipsec | disallow AH+ESP combined policies ; |
| ipsec | do not loose "use-ipsec=yes" parameter after downgrade; |
| ipsec | enable aes-ni on i386 and x64 for cbc, ctr and gcm modes; |
| ipsec | fixed "/ip ipsec policy group export verbose"; |
| ipsec | fixed "mode-cfg" verbose export; |
| ipsec | fixed SA authentication flag; |
| ipsec | renamed "hw-authenc" flag to "hw-aead"; |
| ipsec | show hardware accelerated authenticated SAs; |
| ipsec | updated tilera classifier for UDP encapsulated ESP; |
| l2tp | added support for multiple L2TP tunnels (not to be confused with sessions) between same endpoints (required in some LNS configurations); |
| l2tp | fixed hidden attribute decryption in forwarded CHAP responses for LNS; |
| l2tp-server | added "caller-id-type" to forward calling station number to RADIUS on authentication; |
| l2tp-server | added "use-ipsec=required" option; |
| l2tp-server | fixed upgrade to keep "use-ipsec=yes" in L2TP server; |
| leds | added LTE modem access technology trigger; |
| leds | changed error message on unsupported board; |
| leds | do not update single LED state when it is not changed; |
| leds | show warning on print when "modem-signal-threshold" is not available; |
| log | added "gps" topic; |
| log | added "tr069" topic; |
| log | added missing "license limit exceeded" log entry; |
| log | added warning when Winbox/Dude sessions were denied; |
| log | do not show changes in packet if NAT has not been used; |
| log | make SNMP logs more compact; |
| lte | added "session-uptime" in info command; |
| lte | added LTE signal level reading for Cinterion modems; |
| lte | added error handling for remote AT execute; |
| lte | added initial support for DWR-910 modem; |
| lte | added initial support for Quectel ec25; |
| lte | added initialization for Cinterion; |
| lte | added log entry for SMS delivery report; |
| lte | added support for Vodafone R216 (Huawei); |
| lte | buffer AT events while info command is active; |
| lte | fixed "/interface lte info X once"; |
| lte | fixed IPv6 address prefix on interface |
| lte | fixed network mode selection for me909u, mu609; |
| lte | fixed older standard CEREG parsing; |
| lte | fixed support for Huawai R216; |
| lte | fixed user-command; |
| lte | reset interface stats on "link-down"; |
| netinstall | fixed typos; |
| ntp | restart NTP client when it is stuck in error state; |
| ppp | added "bridge-horizon" option under PPP/Profile; |
| ppp | added option to specify "interface-list" in PPP/Profile; |
| ppp | fixed rare kernel failure on PPP client connection; |
| ppp | fixed rare kernel failure when receiving IPv6 address on PPP interface; |
| ppp | include rates, limits and address-lists parameters in RADIUS accounting requests; |
| ppp-client | added support for Datacard 750UL, DWR-730 and K4607-Zr; |
| pppoe | added warning on PPPoE client/server, if it is configured on slave interface; |
| pppoe | set default keepalive 10s for newly created PPPoE clients; |
| quickset | added initial LTE AP mode support; |
| rb1100ahx2 | fixed random counter resets for ether12,13; |
| rb3011 | added partitioning support; |
| smb | fixed different memory leaks and crashes; |
| smb | fixed share path on devices with "/flash" directory; |
| smips | reduced RouterOS main package size; |
| snmp | "No Such Instance" error message is replaced with "No Such Object"; |
| snmp | added fan-speed OIDs in "/system health print oid"; |
| snmp | added optical table; |
| snmp | fixed rare crash; |
| snmp | improved getall filter; |
| snmp | improved response speed when multiple requests are received within short period of time; |
| snmp | increase "engineBoots" value on reboot; |
| snmp | optimized bridge table processing; |
| tile | added initial support for NVMe SSD disk drives; |
| tile | fixed IPSec crash (introduced in 6.39rc64); |
| tile | optimized hardware encryption; |
| tr069-client | added "Device.Hosts.Host.{i}." support; |
| tr069-client | added "Device.WiFi.NeighboringWiFiDiagnostic." support; |
| tr069-client | added "Ethernet.Interface.{i}.MACAddress" parameter; |
| tr069-client | added DHCP server support; |
| tr069-client | added Upload RPC "2 Vendor Log File" support; |
| tr069-client | added architecture name parameter (X_MIKROTIK_ArchName - vendor specific); |
| tr069-client | added basic stats parameters for some interface types; |
| tr069-client | added basic support for "/ip firewall filters"; |
| tr069-client | added connection request authentication; |
| tr069-client | added firewall NAT support using vendor Parameters; |
| tr069-client | added parameters for DNS client management support; |
| tr069-client | added ping diagnostics support; |
| tr069-client | added support for escaped entity references (& < > ' "); |
| tr069-client | added support for managing "/system/identity/" value; |
| tr069-client | added support for memory and CPU load parameters; |
| tr069-client | added support for uploading/downloading factory script; |
| tr069-client | added traceroute diagnostics support; |
| tr069-client | close connection if CPE considers XML as invalid; |
| tr069-client | fixed "AddObjectResponse" "InstanceNumber" value; |
| tr069-client | fixed "Device.ManagementServer." value update; |
| tr069-client | fixed XML special character parsing; |
| tr069-client | fixed crash on =acs-url change special case; |
| tr069-client | fixed special escape characters on XML data send; |
| tr069-client | fixed write for "Device.ManagementServer.URL"; |
| tr069-client | general improvements on reducing storage space; |
| tr069-client | generate random connection request target path; |
| tr069-client | hide "Device.PPP.Interface.{i}.Password" value; |
| tr069-client | improved LTE monitoring process; |
| tr069-client | increased performance on GetParameterValues; |
| tr069-client | made any Download RPC overwrite configuration except ".alter"; |
| tr069-client | make more Parameters deny active notifications; |
| tr069-client | set CHR license ID as ".SerialNumber" value to avoid "no serial number" error in ACS; |
| traceroute | small fix; |
| tunnels | fixed reboot loop on configurations with IPIP and EoIP tunnels (introduced in 6.39rc68); |
| usb | added support for more CP210X devices; |
| userman | allow "name-for-user" to be empty and not unique; |
| userman | automatically select all newly created users to generate vouchers; |
| userman | fixed rare crash when User Manager requested file does not exist on router; |
| userman | fixed rare web interface crash while using Users section; |
| wAP ac | improved 2.4GHz wireless performance; |
| webfig | added menu bar to quickly select between Webfig, Quickset and Terminal; |
| webfig | allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates"; |
| webfig | allow to change global variable contents; |
| webfig | allow to enter frequency ranges in wireless scan list; |
| webfig | allow to select "default-encryption" profile on PPP tunnels; |
| webfig | correctly specify routing filter prefix; |
| webfig | do not allow to reorder items if table is sorted by some column; |
| webfig | fixed bridge property display; |
| webfig | fixed delays on key press in terminal; |
| webfig | fixed tab ordering on Google Chrome; |
| webfig | fixed last-link-up & last-link-down time information; |
| webfig | improved field layout; |
| webfig | make Terminal window work within Webfig window; |
| webfig | show all available options under Advanced Mode for wireless interfaces; |
| webfig | show proper error messages for optional erroneous text fields; |
| winbox | added "Flush" button under unicast-fdb menu; |
| winbox | added "group-key-update" to CAPsMAN security settings; |
| winbox | added "k" and "M" unit support to PPP secret limit-bytes parameters; |
| winbox | added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" parameters; |
| winbox | added "save-selected" setting under CAPsMAN channels; |
| winbox | added "static-virtual" to wireless CAP; |
| winbox | added GPS menu; |
| winbox | added protected routerboard parameters under routerboard settings menu; |
| winbox | allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates"; |
| winbox | allow to change user password to empty one; |
| winbox | allow to not specify certificate in IPSec peer settings; |
| winbox | allow to specify "route-distance" in "dhcp-client" if "special-classless" mode is selected; |
| winbox | allow to specify certificate type when exporting it; |
| winbox | allow to specify interfaces that CAPsMAN can use for management; |
| winbox | allow unhide SNMP passwords; |
| winbox | allowed to specify static-dns as list; |
| winbox | do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB; |
| winbox | do not create time field when copying CAPsMAN access list entry; |
| winbox | do not show "dpd-max-failures" on IKEv2; |
| winbox | do not show empty LTE fields in Info menu; |
| winbox | do not start Traffic Generator automatically when opening "Quick Start"; |
| winbox | do not try to disable dynamic items from firewall tables; |
| winbox | fixed "Montly" typo to "Monthly" in Graphing menu; |
| winbox | fixed CAPsMAN channels frequency (allow to specify a list of them); |
| winbox | fixed IPSec "mode-config" DNS settings; |
| winbox | fixed issue when working IPSec policies were shown as invalid; |
| winbox | fixed misleading error when trying to export certificate; |
| winbox | fixed typo in BGP advertisements menu Aggragator->Aggregator; |
| winbox | hide "wps-mode" & "security-profile" in wireless nv2 mode; |
| winbox | hide health menu on RB450; |
| winbox | improved "/tool torch"; |
| winbox | increased maximal number of Winbox sessions 20->100; |
| winbox | properly name CAP Interface on new interface creation; |
| winbox | properly show "dhcp-server" warnings; |
| winbox | properly show IPSec "installed-sa" "enc-algorithm" when it is aes-gcm; |
| winbox | properly show wireless registration table stat counters; |
| winbox | removed "sfp-rate-select" setting from ethernet interface; |
| winbox | removed unnecessary "/system health" menu on "hAP ac lite"; |
| winbox | set default "dhcp-client" "default-route-distance" value to 1; |
| winbox | show "A" flag for IPSec policies; |
| winbox | show "H" flag for IPSec installed SAs; |
| winbox | show PoE-OUT current, voltage and power only on devices which can report these values; |
| wireless | added Egypt 5.8 country settings; |
| wireless | added PEAP authentication support for wireless station mode; |
| wireless | apply broadcast bit to DHCP requests when using "station-pseudobridge" mode; |
| wireless | do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used; |
| wireless | fixed RBSXT5HacD2nr2 small channel support; |
| wireless | fixed crash while running "spectral-scan"; |
| wireless | fixed dynamic wireless interface removal from bridge ports when changing wireless mode; |
| wireless | fixed false positive DFS radar detection caused by iPhone 6s devices; |
| wireless | fixed issue when wireless interfaces might not show up in CAP mode; |
| wireless | fixed occasional crash on interface disabling; |
| wireless | fixed rare crash on nv2 configurations; |
| wireless | fixed rare wireless ac interface lockup; |
| x86 | added support for NVMe SSD disk drives; |