Component: discovery
70 changelog entries across 28 version(s)
Activity over time (changelog entries per month)
- correctly report PoE dual signature per-pair class;
- fixed MNDP IPv6 status reporting;
- send out neighbor discovery immediately on IPv4/IPv6 changes;
- disable discovery on loopback, LTE, ppp-out interfaces;
- improved LLDP Power via MDI TLV with 802.3bt specific field support;
- output LLDP fault message once per port poe-out status change;
- report router as "CAPsMAN" on MNDP under "running" parameter;
- set initial poe-out Tx power above 0dW;
- advertise IPv6 capabilities based on "Disable IPv6" global setting;
- improved stability during configuration changes;
- report actual PSE power-pair with LLDP;
- use power-via-mdi-short LLDP TLV only on pse-type1 802.3af;
- added support for LLDP DCBX;
- use LLDP description field to populate platform, version and board-name;
- added discover-interval setting;
- added LLDP Port VLAN ID, Port And Protocol VLAN ID, VLAN Name TLVs support;
- added LLDP-MED timeout;
- changed default discover-interval setting from 60s to 30s;
- set unknown bit for any unspecified link type in MAC/PHY TLV;
- added LLDP MAC/PHY Configuration/Status TLV support;
- added LLDP Maximum Frame Size TLV support;
- added LLDP Port Description TLV support;
- advertise only physical interface name for LLDP PortID TLV;
- always send LLDP MED Power TLV if MED was received;
- fixed high CPU utilization when "tx-only" mode is set;
- optimized LLDP information update;
- fixed "lldp-med-net-policy-vlan" (introduced in v7.8);
- added "discovered-by" parameter to indicate which protocol discovered the neighbor;
- added "mode" parameter for discovery configuration;
- fixed neighbor discovery on Mesh interfaces;
- report IPv6 LL address if global address does not exist;
- do not send discovery packets on interfaces that are blocked by STP (introduced in v6.48);
- added "lldp-med-net-policy-vlan" property for assigning VLAN ID;
- allow choosing which discovery protocol is used;
- fixed discovery on mesh ports;
- fixed discovery packet sending on newly bridged port with "protocol-mode=none";
- fixed discovery when enabled only on master port;
- send the same "Chassis ID" on all interfaces for LLDP packets;
- use interface MAC address when sending MNDP from slave port;
- do not send discovery packets on inactive bonding slave interfaces;
- do not send discovery packets on interfaces that are blocked by STP;
- use "static" interface list by default instead of "!dynamic";
- do not send discovery packets on inactive bonding slave interfaces;
- do not send discovery packets on interfaces that are blocked by STP;
- do not send CDP and LLDP packets on interfaces that does not have MAC address;
- do not send CDP and LLDP packets on interfaces that does not have MAC address;
- fixed CDP packets not including address on slave ports (introduced in v6.44);
- correctly create neighbors from VLAN tagged discovery messages;
- fixed CDP packets not including address on slave ports (introduced in v6.44);
- improved neighbour's MAC address detection;
- limit max neighbour count per interface based on total RAM memory;
- show neighbors on actual mesh ports;
- detect proper slave interface on bounded interfaces;
- fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
- send master port in "interface-name" parameter;
- show neighbors on actual bridge port instead of bridge itself for LLDP;
- fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
- fixed neighbor discovery for PPP interfaces;
- fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
- fixed neighbor discovery for PPP interfaces;
- properly use System ID for "software-id" value on CHR;
- fixed discovery interface list change;
- fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
- use "/interface list" instead of interface name under neighbor discovery settings;
- fixed timeouts for LLDP neighbours;
- fixed LLDP discovery, IPv6 address was not parsed correctly;
- added LLDP support;
- removed 6to4 tunnels from "/ip neighbor discovery menu";
- fixed identity discovery (introduced in 6.34.5);
- fixed identity discovery (introduced in 6.35.1);