Version: 6.39.3
Long-term87 changelog entries across 48 component(s)
2017-Oct-12 (8 years ago)
| Component | Change |
|---|---|
| arp | properly update dynamic ARP entries after interface related changes; |
| bonding | fixed 802.3ad mode on RB1100AHx4; |
| bonding | improved reliability on bonding interface removal; |
| console | fixed different command auto complete; |
| crs1xx/2xx | fixed 1 Gbps forced mode for several SFP modules; |
| crs317 | added L2MTU support; |
| crs3xx | improved packet processing in slowpath; |
| dhcp | fixed downgrade from RouterOS v6.41 or higher; |
| dhcpv4-server | fixed lease renew for DHCP clients that sends renewal with "ciaddr = 0.0.0.0"; |
| dhcpv6-client | do not run DHCPv6 client when IPv6 package is disabled; |
| dhcpv6-client | fixed IA evaluation order; |
| dhcpv6-client | require pool name to be unique; |
| dhcpv6-server | do not release address of static binding from pool after server removal; |
| discovery | fixed timeouts for LLDP neighbours; |
| ethernet | fixed occasional broken interface order after reset/first boot; |
| ethernet | fixed rare linking problem with forced 10Mbps full-duplex mode; |
| export | fixed export for PoE-OUT related settings; |
| export | fixed wireless "ssid" and "supplicant-identity" compact export; |
| fasttrack | fixed fasttrack over interfaces with dynamic MAC address; |
| firewall | fixed bridge "action=log" rules; |
| firewall | fixed crash on fasttrack dummy rule manual change attempt; |
| firewall | properly remove "address-list" entry after timeout ends; |
| firewall | removed unique address list name limit; |
| hAP ac lite | removed nonexistent "wlan-led"; |
| hotspot | improved user statistics collection process; |
| hotspot | require "dns-name" to contain "." symbol under Hotspot Server Profile configuration; |
| ike1 | fixed initiator ID comparison to NAT-OA; |
| interface | improved interface state change handling when multiple interfaces are affected at the same time; |
| ipsec | do not deduct "dst-address" from "sa-dst-address" for "/0" policies; |
| ipv6 | fixed IPv6 address request from pool; |
| metarouter | fixed display of bogus error message on startup; |
| ntp-client | properly start NTP client after reboot if manual server IP is not configured; |
| ovpn | added support for "push-continuation"; |
| ovpn | added support for topology subnet for IP mode; |
| ovpn | fixed duplicate default gateway presence when receiving extra routes; |
| ovpn | improved performance when receiving too many options; |
| ping | fixed ping getting stuck (after several thousands of ping attempts); |
| ppp | fixed non-standart PAP or CHAP packet handling; |
| pppoe-client | fixed incorrectly formed PADT packet; |
| pppoe-client | fixed wrong MRU detection over VLAN interfaces; |
| proxy | fixed rare program crash after closing client connection; |
| quickset | fixed incorrect VPN address value on arm and tilera; |
| rb1100ahx4 | fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes; |
| rb1100ahx4 | fixed startup problems (requires additional reboot after upgrade); |
| rb2011 | fixed possible LCD blinking along with ethernet LED; |
| rb3011 | fixed packet passthrough on switch2 while booting; |
| rb922 | restored missing wireless interface on some boards; |
| safe-mode | fixed session handling when Safe Mode is used on multiple sessions at the same time; |
| sfp | fixed invalid temperature readings when ambient temperature is below 0C; |
| sfp | fixed OPTON module DDM information readings; |
| sfp | fixed temperature readings for various SFP modules; |
| sniffer | do not skip L2 packets when "all" interface mode was used; |
| snmp | fixed "/caps-man registration-table" uptime values; |
| snmp | fixed "/system license" parameters for CHR; |
| snmp | fixed "/system resource cpu print oid"; |
| snmp | fixed crash on interface table get; |
| ssh | do not execute command if it starts with "-" symbol; |
| supout | fixed IPv6 firewall section; |
| switch | fixed multicast forwarding on CRS326; |
| tile | fixed copying large amount of text over serial console; |
| tile | improved reliability on MPLS package processing; |
| traffic-flow | fixed reboots when IPv6 address has been set as target address without active IPv6 package; |
| trafficgen | fixed "lost-ratio" showing incorrect statistics after multiple sequences; |
| userman | do not send disconnect request for user when "simultaneous session limit reached"; |
| userman | fixed "limitation" and "profile-limitation" update; |
| userman | fixed CoA packet processing after changes in "/tool user-manager router" configuration; |
| userman | lookup language files also in "/flash" directory; |
| vlan | do not allow VLAN MTU to be higher than L2MTU; |
| vlan | do not delete existing VLAN interface on "failure: already have such vlan"; |
| webfig | allow to unset "rate-limit" for DHCP leases; |
| webfig | fixed wireless "scan-list" parameter not being saved after applying changes; |
| webfig | improved reliability of login process; |
| winbox | added possibility to define "comment" for "/routing bgp network" entries; |
| winbox | added support for certificate CRL list; |
| winbox | do not show LCD menu for devices which does not have it; |
| winbox | fixed ARP table update after entry changes state to incomplete; |
| winbox | hide "level" and "tunnel" parameters for IPSec policy templates; |
| winbox | hide FAN speed if it is 0RPM; |
| winbox | make IPSec policies table an ordered list; |
| winbox | properly show "dhcp-server" warnings; |
| winbox | show "/interface wireless cap print" warnings; |
| winbox | show "/system health" only on boards that have health monitoring; |
| winbox | show "D" flag under "/interface mesh port" menu; |
| wireless | added "etsi1" and "russia3" regulatory domain information; |
| wireless | fixed compatibility with "AR5212" wireless chips; |
| wireless | improved WPA2 key exchange reliability; |
| wireless | updated "china", "norway" and "new-zealand" regulatory domain information; |