Component: wireless
374 changelog entries across 121 version(s)
Activity over time (changelog entries per month)
- added last-ip parameter for the CAPSMAN registration-table tab;
- improved system stability when stopping scan process;
- changed CLI snooper column name "freq" to "channel";
- added "eap-identity" to registration table;
- implement handling of RADIUS disconnect messages by CAPsMAN;
- suggest all legitimate frequencies for interfaces with 20/40mhz-XX channel width in GUI;
- allow to set Canada2 country profile when locked with US lock package for CubeG device;
- fixed antenna gain for SXT5ac device;
- added option to reset MAC address (CLI only);
- added vlan-id to registration-table;
- allow to set Canada2 country profile when locked with US lock package for CubeG device;
- enable all chains by default for RB911 and RB922 series devices;
- fixed antenna gain for SXT5ac device;
- preserve configured country while using setup-repeater, added "country" argument (CLI only);
- allow unsetting signal-range and ssid-regext properties for capsman access-list;
- fixed dynamic VLAN assignments for vlan-filtering bridge in certain cases;
- limit antenna-gain property to 100;
- perform shorter channel availability check for 5600-5650MHz if regulatory domain permits it;
- fixed "wlan1" default name for RBSXTsqG-5acD and RBLDFG-5acD;
- fixed snooper information gathering from re-assocation requests;
- keep configuration after manual package removal;
- fixed "wlan1" default name for RBSXTsqG-5acD and RBLDFG-5acD;
- added more "radius-mac-format" options (CLI only);
- fixed malformed Interworking packet elements;
- ignore EAPOL Logoff frames;
- fixed "nstreme" related parameter control in skins;
- fixed setting of realms interworking parameter if realms-raw is unset;
- disallowed using "default" as scan list or channel names;
- fixed incorrectly applied ingress priority to non-wireless packets;
- fixed missing wireless interface on some RB921GS-5HPacD devices;
- fixed disconnection of connected client while running background scan on wAP ac and wAP R ac devices;
- fixed missing wireless interface on some RB921GS-5HPacD devices;
- fixed interface initialization on x86 devices;
- fixed possible traffic flooding to WDS clients when using Nv2 and multicast helper;
- fixed "wmm-support=required" checking;
- fixed EAP-TLS authentication;
- fixed GUD version in 3gpp information;
- fixed EAP-TLS authentication;
- fixed GUD version in 3gpp information;
- fixed GUD version in 3gpp information;
- added "3gpp-info" parameter to interworking configuration;
- added EAP-AKA to interworking's realm configuration;
- added information about client signal strength to log messages about disconnections;
- correctly preserve WMM priority when receiving packets;
- fixed frequency range information for IPQ4019 interfaces;
- fixed interface initialization on Metal 2SHPn;
- improved nv2 link stability;
- improved wireless connection stability during background scans;
- added "3gpp-info" parameter to interworking configuration;
- added EAP-AKA to interworking's realm configuration;
- fixed interface initialization on Metal 2SHPn;
- added "3gpp-info" parameter to interworking configuration;
- added EAP-AKA to interworking's realm configuration;
- correctly preserve WMM priority when receiving packets;
- updated "philippines" regulatory domain information;
- correctly preserve WMM priority when receiving packets;
- added U-NII-2 support for US and Canada country profiles for OmniTik 5, Metal 52 ac, and GrooveA 52 devices;
- added U-NII-2 support for US and Canada country profiles for cAP ac XL and QRT 5 ac;
- added U-NII-2 support for US and Canada country profiles for cAP ac XL and QRT 5 ac;
- fixed frequency range information on IPQ4019;
- added U-NII-2 support for US and Canada country profiles for hAP ac lite;
- added override for multicast-to-unicast translation of DHCP traffic;
- do not remove channels >2462 MHz from "scanlist" if scanning for fixed channel;
- do not send packet back to station-bridge it was received from;
- fixed minor typo in debug logging messages;
- improve WMM priority assignment for packets with internal priority greater than 7;
- improve regulatory compliance with DFS requirements;
- improve signaling of QCA9984 interface capabilities when using 160/80+80MHz channel width;
- improved system stability when sending packets through interface after L2MTU is increased;
- log client signal strength on disconnect;
- renamed "secondary-channel" to "secondary-frequency";
- updated "israel" regulatory domain information;
- updated "united kingdom" regulatory domain information;
- added U-NII-2 support for US and Canada country profiles for hAP ac lite;
- added U-NII-2 support for US and Canada country profiles for hAP ac^3;
- added U-NII-2 support for US and Canada country profiles for hap ac, hAP ac^3 LTE6, Audience and Audience LTE6;
- updated "israel" regulatory domain information;
- fixed issue with multicast traffic delivery to client devices using power-save;
- improved iOS compatibility with HotSpot 2.0 networks;
- fixed issue with multicast traffic delivery to client devices using power-save;
- improved iOS compatibility with HotSpot 2.0 networks;
- renamed "macedonia" regulatory domain information to "north macedonia";
- updated "indonesia5" regulatory domain information;
- renamed "macedonia" regulatory domain information to "north macedonia";
- added U-NII-2 support for US and Canada country profiles for mANTBox series devices;
- create "connect-list" rule when address specified for "setup-repeater";
- do not override MTU and ARP values from CAPsMAN with local forwarding;
- improved WPS process stability;
- increased "group-key-update" maximum value to 1 day;
- updated "indonesia5" regulatory domain information;
- updated "no_country_set" regulatory domain information;
- added support for U-NII-2 US and Canada country profiles for mANTBox series devices;
- added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
- fixed incorrect wireless capability information in association response frames;
- updated "kazakhstan" regulatory domain information;
- updated "kazakhstan" regulatory domain information;
- added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
- fixed incorrect wireless capability information in association response frames;
- added support for U-NII-2 for wAP ac;
- updated "canada" regulatory domain information;
- updated "united states" regulatory domain information;
- added support for U-NII-2 for cAP ac;
- added support for U-NII-2 for wAP ac;
- allow setting "tx-power" up to 40;
- changed "station-roaming" default setting from "enabled" to "disabled";
- fixed potential wireless driver issue related to CVE-2020-3702;
- improved management service stability when receiving bogus packets;
- updated "bangladesh" regulatory domain information;
- updated "canada" regulatory domain information;
- updated "egypt" regulatory domain information;
- updated "indonesia5" regulatory domain information;
- updated "united states" regulatory domain information;
- allow setting "tx-power" up to 40;
- fixed potential wireless driver issue related to CVE-2020-3702;
- added support for U-NII-2 for cAP ac;
- updated "indonesia5" regulatory domain information;
- changed "station-roaming" default setting from "enabled" to "disabled";
- updated "bangladesh" regulatory domain information;
- updated "egypt" regulatory domain information;
- added "russia 6ghz" regulatory domain information;
- enabled unicast flood for DHCP traffic on ARM architecture access points;
- fixed Nstreme wireless protocol performance decrease;
- improved management service stability when receiving bogus packets;
- updated "egypt" regulatory domain information;
- updated "russia4" regulatory domain information;
- added "skip-dfs-channels" parameter;
- allow using FCC "U-NII-2" frequency range for hAP ac2 and RBwAPGR series devices;
- fixed default "antenna-gain" setting on SXT 2 devices;
- improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
- improved compatibility for "ETSI" wireless country profile;
- improved system stability on hAP ac^2;
- updated "bangladesh" regulatory domain information;
- updated "indonesia4" regulatory domain information;
- updated "south africa" regulatory domain information;
- improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
- improved system stability on hAP ac^2;
- updated "south africa" regulatory domain information;
- added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
- added "skip-dfs-channels" parameter;
- fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
- updated "bangladesh" regulatory domain information;
- updated "indonesia4" regulatory domain information;
- improved compatibility for "ETSI" wireless country profile;
- added "ETSI" regulatory domain information;
- added "indonesia4" regulatory domain information;
- added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
- allow using "canada2" regulatory domain on US lock devices;
- fixed sensor MAC address reporting in TZSP header;
- improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas;
- improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
- improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
- added "russia4" regulatory domain information;
- improved compatibility by adding default installation mode and gain for devices with integrated antennas;
- improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
- added 4 chain MCS support for 802.11n wireless protocol (CLI only);
- added "ETSI" regulatory domain information;
- added "indonesia4" regulatory domain information;
- added "push-button-5s" value for "wps-mode" parameter;
- added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
- allow using "canada2" regulatory domain on US lock devices;
- fixed 802.11n rate selection when managed by CAPsMAN;
- fixed RX chain selection;
- fixed sensor MAC address reporting in TZSP header;
- improved 802.11ac stability for all ARM devices with wireless;
- improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
- updated "ukraine" regulatory domain information;
- updated "united-states" regulatory domain information;
- added "canada2" regulatory domain information;
- improved stability when setting fixed primary and secondary channels on RB4011iGS+5HacQ2HnD-IN;
- fixed basic rate reporting in snooper;
- improved 802.11ac stability for all ARM devices with wireless;
- improved range selection when distance set to "dynamic";
- improved stability when setting fixed primary and secondary channels on RB4011iGS+5HacQ2HnD-IN;
- include last frequency when manually setting frequency step in "scan-list";
- fixed basic rate reporting in snooper;
- improved U-APSD (WMM Power Save) support for 802.11e;
- improved 802.11ac stability for all ARM devices with wireless;
- improved range selection when distance set to "dynamic";
- improved DFS radar detection when using non-ETSI regulated country;
- improved installation mode selection for wireless outdoor equipment;
- updated "china" regulatory domain information;
- fixed frequency duplication in the frequency selection menu;
- fixed incorrect IP header for RADIUS accounting packet;
- improved 160MHz channel width stability on rb4011;
- improved DFS radar detection when using non-ETSI regulated country;
- improved installation mode selection for wireless outdoor equipment;
- set default SSID and supplicant-identity the same as router's identity;
- updated "china" regulatory domain information;
- updated "new zealand" regulatory domain information;
- added support for US FCC UNII-2 and Canada country profiles for LHG-5HPnD-US, RBLHG-5HPnD-XL-US and SXTsq5HPnD-US devices;
- improved wireless country settings for EU countries, outdoor models will use outdoor frequency range by default;
- improved system stability for all devices with 802.11ac wireless;
- improved wireless country settings for EU countries;
- added support for US FCC UNII-2 and Canada country profiles for LHG-5HPnD-US, RBLHG-5HPnD-XL-US and SXTsq5HPnD-US devices;
- improved wireless country settings for EU countries;
- fixed antenna gain setting on RBSXT5nDr2;
- fixed antenna gain setting on RBSXT5nDr2;
- improved antenna gain setting for devices with built in antennas;
- improved AR5212 response to incoming ACK frames;
- improved connection stability for new model Apple devices;
- added new "installation" parameter to specify router's location;
- improved AR5212 response to incoming ACK frames;
- improved connection stability for new model Apple devices;
- improved NV2 performance for all ARM devices;
- improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);
- improved system stability for all ARM devices with wireless;
- improved system stability for all devices with 802.11ac wireless;
- improved system stability when scanning for other networks;
- removed G/N support for 2484MHz in "japan" regulatory domain;
- report last seen IP address in RADIUS accounting messages;
- show "installation" parameter when printing configuration;
- improved antenna gain setting for devices with built in antennas;
- show indoor/outdoor frequency limitations under "/interface wireless info country-info" command;
- improved antenna gain setting for devices with built in antennas;
- show indoor/outdoor frequency limitations under "/interface wireless info country-info" command;
- added new "installation" parameter to specify router's location;
- improved stability for 802.11ac;
- improvements in wireless frequency selection;
- added new "installation" parameter to specify router's location;
- improved stability for 802.11ac;
- improvements in wireless frequency selection;
- accept only valid path for sniffer output file parameter;
- fixed "/interface wireless sniffer packet print follow" output;
- removed "czech republic 5.8" regulatory domain information as it overlaps with "ETSI 5.7-5.8";
- accept only valid path for sniffer output file parameter;
- added "czech republic 5.8" regulatory domain information;
- added "etsi2" regulatory domain information;
- added option for RADIUS "called-station-id" format selection;
- added option to disable PMKID for WPA2;
- do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
- fixed "/interface wireless sniffer packet print follow" output;
- fixed wireless interface lockup after period of inactivity;
- improved Nv2 reliability on ARM devices;
- improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
- require "sniff" policy for wireless sniffer;
- updated "czech republic" regulatory domain information;
- updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
- added option to disable PMKID for WPA2;
- enable all chains by default on devices without external antennas after configuration reset;
- fixed packet processing after removing wireless interface from CAP settings;
- improved client "channel-width" detection;
- improved Nv2 PtMP performance;
- increased stability on hAP ac^2 and cAP ac with legacy data rates;
- updated "united-states" regulatory domain information;
- added option to disable PMKID for WPA2;
- fixed memory leak when performing wireless scan on ARM;
- fixed packet processing after removing wireless interface from CAP settings;
- updated "united-states" regulatory domain information;
- enable all chains by default on devices without external antennas after configuration reset;
- improved Nv2 reliability on ARM devices;
- improved client "channel-width" detection;
- improved Nv2 PtMP performance;
- increased stability on hAP ac^2 and cAP ac with legacy data rates;
- enable all chains by default on devices without external antennas after configuration reset;
- fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
- fixed usage of allowed signal strength values received from RADIUS;
- improved wireless throughput on hAP ac^2 and cAP ac;
- improved compatibility with BCM chipset devices;
- improved compatibility with BCM chipset devices;
- added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
- added initial support for "nstreme-plus";
- added support for "band=5ghz-n/ac";
- added support for "interface-list" for Access List entries;
- added support for legacy AR9485 chipset;
- enable all chains by default on devices without external antennas after configuration reset;
- fixed "wds-slave" channel selection when single frequency is specified;
- fixed incompatibility with macOS clients;
- fixed long "scan-list" entries not working for ARM based wireless interfaces;
- fixed nv2 protocol on ARM platform SXTsq devices;
- fixed RB911-5HnD low transmit power issue;
- fixed RTS/CTS option for the ARM based wireless devices;
- fixed wsAP wrong 5 GHz interface MAC address;
- improved compatibility with specific wireless AC standard clients;
- improved Nv2 PtMP performance;
- improved packet processing on ARM platform devices;
- improved wireless performance on hAP ac^2 devices while USB is being used;
- improved wireless scan functionality;
- enable all chains by default on devices without external antennas after configuration reset;
- enable all chains by default on devices without external antennas after configuration reset;
- removed unused "/interface wireless registration-table monitor" command;
- fixed wireless protocol mode restrictions if lockpack is installed and has limits for it;
- removed unused monitor command from CLI;
- updated "Australia", "Czech Republic", "UK 5.8 Fixed" and "United Kingdom" regulatory domain information;
- fixed wireless protocol mode restrictions if lockpack is installed and has limits for it;
- updated "Czech Republic" country 5.8 GHz frequency range;
- added "allow-signal-out-off-range" option for Access List entries;
- added "indonesia3" regulatory domain information;
- added passive scan option for wireless scan mode;
- added support for CHARGEABLE_USER_ID in EAP Accounting;
- check APs against connect-list rules starting with strongest signal;
- do not show background scan frequencies in the monitor command channel field;
- improved reliability on "rx-rate" selection process;
- increased the EAP message retransmit count;
- log "signal-strength" when successfully connected to AP;
- pass interface MAC address in Sniffer TZSP frames;
- updated "UK 5.8 Fixed" and "Australia" country data;
- updated "united kingdom" regulatory domain information;
- fixed rate selection process when "rate-set=configured" and NV2 protocol is used;
- added "etsi1" and "russia3" regulatory domain information;
- fixed compatibility with "AR5212" wireless chips;
- improved WPA2 key exchange reliability;
- updated "china", "norway" and "new-zealand" regulatory domain information;
- added "etsi1" regulatory domain information;
- improved WPA2 key exchange reliability;
- updated "norway" regulatory domain information;
- added "russia3" country settings;
- added New Zealand regulatory domain information for P2P links;
- updated China and New Zealand regulatory domain information;
- reduced load on CPU for high speed wireless links;
- reduced load on CPU for high speed wireless links;
- added Egypt 5.8 country settings;
- added PEAP authentication support for wireless station mode;
- apply broadcast bit to DHCP requests when using "station-pseudobridge" mode;
- do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used;
- fixed RBSXT5HacD2nr2 small channel support;
- fixed crash while running "spectral-scan";
- fixed dynamic wireless interface removal from bridge ports when changing wireless mode;
- fixed false positive DFS radar detection caused by iPhone 6s devices;
- fixed issue when wireless interfaces might not show up in CAP mode;
- fixed occasional crash on interface disabling;
- fixed rare crash on nv2 configurations;
- fixed rare wireless ac interface lockup;
- fixed scan tool stuck in background;
- improved compatibility with Intel 2200BG wireless card;
- update Thailand country frequency settings;
- fixed scan tool stuck in background;
- improved compatibility with Intel 2200BG wireless card;
- added "station-roaming" setting;
- update Thailand country frequency settings;
- show comment on "security-profile" if it is set;
- fixed full "spectral-history" header print on AP modes;
- fixed upgrade from older wireless packages when AP interface had empty SSID;
- show comment on "security-profile" if it is set;
- added API command to report country-list (/interface/wireless/info/country-list);
- added CRL checking for eap-tls;
- fixed action frame handling for WDS nodes;
- fixed custom channel extension-channel appearance in console;
- fixed full "spectral-history" header print on AP modes;
- fixed rare kernel failure when connecting to nv2 access point with legacy rate select;
- fixed upgrade from older wireless packages when AP interface had empty SSID;
- take in account channel width when returning supported channels;
- use VLAN ID 0 in RADIUS message to disable VLAN tagging;
- show DFS flag in country-info command output;
- display DFS flag in country info;
- improved driver support for RB953, hAP ac, wAP ac;
- send deauth to data frames in scan mode.
- updated brazil country settings;
- wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade;
- fixed multiple wireless packages enabled at the same time after upgrade;
- fixed issue when CAPsMAN could lock CAPs interface;
- fixed issue when CAPsMAN could lock CAPs interface;
- added new package "wireless-rep";
- improved 1-chain 802.11ac station compatibility with other vendor multi-chain APs;
- fixed crash on nstreme-dual interface stats update;
- added WPS buttons support on hAP and hAP ac lite;
- regular “wireless” package is now retired and replaced by "wireless-fp" and "wireless-cm2";
- added WMM power save suport for mobile devices;
- improve ac radio coexistence with other wireless clients, optimized
- fixed scanning tool crash for 802.11ac interfaces
- fixed Nv2 kernel panic on 802.11ac interfaces
- improvements for nv2 and 802.11ac
- add auto frequency feature;
- improve rate selection for nstreme protocol
- fixed crash when dfs was enabled on pre-n wireless cards;
- improved 802.11n wireless retransmission (doesn't effect nstreme/nv2)
- update required when using small width channel RB2011 RB9xx
- fixed AES encryption speed issues (upgrade suggested);
- fixed RADIUS mac-caching;
- fixed rare nv2 link stall;
- improved nv2 stability;
- do not use bridge and WDS mode on AP-AP links, causes loops;
- improved nv2 link stability to reduce control frame timeouts,
- nv2 improvements for 11n cards;
- change default rate-selection to advanced;