Version: 6.46
Stable154 changelog entries across 48 component(s)
2019-Dec-02 (6 years ago)
| Component | Change |
|---|---|
| backup | fixed automatic backup file generation when configuration reset by button; |
| backup | store automatically created backup file in "flash" directory; |
| bonding | correctly remove HW offloaded bonding with ARP monitoring; |
| bonding | properly handle MAC addresses when bonding WLAN interfaces; |
| bridge | disable/enable bridge port when setting bpdu-guard; |
| bridge | do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged; |
| bridge | do not add dynamically VLAN entry when changing "pvid" property for non-vlan aware bridge; |
| bridge | include whole VLAN-id in DHCP Option 82 message; |
| btest | removed duplicate "duration" parameter; |
| capsman | fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required); |
| capsman | fixed channel auto reselection; |
| capsman | fixed MAC address detection for "common-name" parameter in certificate requests; |
| capsman | improved DFS channel switching when radar detected; |
| capsman | improved radar detection algorithm; |
| ccr | improved general system stability; |
| certificate | added progress bar when creating certificate request; |
| certificate | added support for certificate request signing with EC keys; |
| certificate | allow specifying "file-name" parameter for export (CLI only); |
| certificate | allow specifying "name" parameter for import (CLI only); |
| certificate | improved CRL updating process; |
| certificate | removed "key-size" parameter for "create-certificate-request" command; |
| chr | added support for Azure guest agent; |
| console | added bitwise operator support for "ip6" data type; |
| console | fixed "address" column width when printing DHCPv4 leases; |
| console | fixed IP conversion to "num" data type; |
| console | fixed "tobool" conversion; |
| console | properly detect IPv6 address as "ip6" data type; |
| crs1xx/2xx | allow to set trunk port as mirroring target; |
| crs3xx | correctly handle L2MTU change; |
| crs3xx | do not send pause frames when ethernet "tx-flow-control" is disabled on CRS326/CRS328/CRS305 devices; |
| crs3xx | improved interface initialization; |
| crs3xx | improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices; |
| crs3xx | improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices; |
| crs3xx | remove previously set mirror-source property before changing it; |
| defconf | fixed default configuration loading on RBmAPL-2nD (introduced in v6.45); |
| defconf | require "policy" permission to print default configuration; |
| dhcpv4-client | allow empty "dhcp-options" parameter when adding new client; |
| dhcpv4-client | fixed "dhcp-options" parameter setting when adding new client; |
| dhcpv4-server | improved stability when RADIUS Interim update is sent; |
| dhcpv6-client | fixed timeout when doing rebind; |
| dhcpv6-client | properly update bind time when unused prefix received from the server; |
| dhcpv6-client | properly update IPv6 address on rebind; |
| dhcpv6-server | fixed logged error message when using "address-pool=static-only"; |
| dhcpv6-server | ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS; |
| dhcpv6-server | include "User-Name" parameter in accounting requests; |
| dhcpv6-server | made "calling-station-id" contain MAC address if DUID contains it; |
| dot1x | added "reject-vlan-id" server parameter (CLI only); |
| dot1x | added support for dynamic switch rules from RADIUS; |
| dot1x | added support for "mac-auth" authentication type (CLI only); |
| ethernet | do not enable interface after reboot that is already disabled; |
| ethernet | send requests only from ethernet interface when using MAC address for power-cycle-ping; |
| ethernet | automatically detect interface when using IP address for power-cycle-ping; |
| export | always export "ssid" value for w60g interfaces; |
| fetch | do not allocate extra 500KiB on SMIPS; |
| fetch | improved stability when processing large output data; |
| gps | use "serial1" as default port on RBLtAP-2HnD; |
| hotspot | fixed non-local NAT redirection to port TCP/64873; |
| hotspot | fixed RADIUS CoA "address-list" update; |
| ike1 | fixed minor spelling mistake in logs; |
| ike2 | improved CHILD SA rekey process with Apple iOS 13; |
| ike2 | improved stability when retransmitting first packet as responder; |
| ipsec | added "error" topic for identity check failure logging messages; |
| ipsec | fixed DNS resolving when domain has only AAAA entries; |
| ipsec | fixed policy "sa-src-address" detection from "local-address" (introduced in v6.45); |
| ipv6 | changed "advertise-dns" default value to "yes"; |
| led | fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD; |
| log | increased log message length limit to 1024 characters; |
| lte | added support for D402 modem; |
| lte | added support for LM960A18; |
| lte | added support for Telit LM960 and LE910C1 modems; |
| lte | do not allow setting 3G and GSM modes on LTE only modems; |
| lte | fixed band setting on R11e-4G; |
| lte | fixed network registration on R11e-LTE-US; |
| lte | fixed Sierra WP7601 driver loading; |
| lte | fix "operator" names not being displayed properly; |
| lte | improved modem initialization; |
| lte | show "primary-band" only for LTE modems; |
| lte | use /128 prefix for IPv6 address on LTE interface; |
| lte | use interface from RA when "ipv6-interface=none" and IPv6 enabled; |
| ppp | added 3GPP IoT "access-technology" definitions; |
| ppp | added support for Sierra WP7601; |
| ppp | disable DTR send when using at-chat; |
| quickset | added "LTE AP Dual" mode support; |
| quickset | added "LTE APN" dropdown support; |
| quickset | fixed "LTE Band" checkbox display; |
| route | fixed area range summary route installation in VRF; |
| routerboard | fixed default CPU frequency on RB750r2 ("/system routerboard upgrade" required); |
| routerboard | fixed USB configuration export on RBLtAP-2HnD; |
| routerboard | hide "memory-frequency" parameter for RBLtAP-2HnD; |
| sniffer | allow filtering by packet size; |
| snmp | added "disabled" and "comment" parameters for communities; |
| snmp | added option to monitor "link-downs" parameter using MIKROTIK-MIB; |
| snmp | fixed "dot1dBasePort" index offset for BRIDGE-MIB; |
| snmp | fixed "ifLastChange" OID reporting for IF-MIB; |
| snmp | fixed "radio-name" (mtxrWlRtabRadioName) OID support; |
| snmp | improved interface status reporting for IfOperStatus OID; |
| snmp | improved LLDP interface returned index and type; |
| snmp | return only interfaces with MAC addresses for LLDP; |
| snmp | use "src-address" also for traps; |
| ssh | fixed output printing when "command" parameter used; |
| supout | include information from all LTE interfaces; |
| supout | removed "file" option from "/system sup-output" command; |
| switch | added "comment" property for switch vlan menu (CLI only); |
| switch | correctly update dynamic switch rule when dhcp-snooping is enabled; |
| switch | ignore "default-vlan-id" property after switch reset on RTL8367 switch chip; |
| switch | show "external" flag for bridge hosts on MT7621, RTL8367 switch chips; |
| timezone | updated time zone database to version 2019c; |
| tr069-client | added CellDiagnostics parameter support; |
| tr069-client | added LTE band and cellular technology selection parameters; |
| tr069-client | added LTE RSCP, ECNO and ICCID parameter support; |
| tr069-client | added multiple LTE monitoring parameters; |
| tr069-client | reconnect to ACS when "ConnectionRequestURL" is updated; |
| upgrade | improved auto package updating using "check-for-updates"; |
| ups | improved compatibility with APC UPS's; |
| usb | general USB modem stability improvements; |
| userman | updated Authorize.Net to use SHA512 hashing; |
| w60g | added "region" setting to limit allowed frequencies (CLI only); |
| w60g | do not reset link when changing comment on station; |
| w60g | fixed "monitor" command on disabled interfaces; |
| w60g | move stations to new bridge when "put-in-bridge" parameter is changed; |
| webfig | fixed link to Winbox download; |
| winbox | added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu; |
| winbox | added "public-address-ipv6" parameter to "IP/Cloud" menu; |
| winbox | added "reset-counters" button to "IP/Kid Control/Devices" menu; |
| winbox | added "tx-info-field" parameter to "Wireless/W60G" menu; |
| winbox | added "Vendor Classes" tab in "IP/DHCP Server" menu; |
| winbox | added wireless alignment LED types to "System/LEDs" menu; |
| winbox | fixed allowed range for bridge filter "new-priority" parameter; |
| winbox | fixed "CAPs Scanner" stopping; |
| winbox | fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu; |
| winbox | fixed file locking when uploading multiple files at once; |
| winbox | fixed firewall limit parameter support for rates more than 4G; |
| winbox | fixed invalid flag presence in "IP/SMB/Shares" menu; |
| winbox | fixed "Routing" menu icon presence when there is no routing package installed; |
| winbox | improved stability when transfering multiple files between multiple windows; |
| winbox | properly show timestamp in file "Creation Time" field; |
| winbox | removed "Set CA Passphrase" button from "Certificate" menu; |
| winbox | renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters; |
| winbox | replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu; |
| winbox | show "Switch" menu on RBwAPGR-5HacD2HnD; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| wireless | added 4 chain MCS support for 802.11n wireless protocol (CLI only); |
| wireless | added "ETSI" regulatory domain information; |
| wireless | added "indonesia4" regulatory domain information; |
| wireless | added "push-button-5s" value for "wps-mode" parameter; |
| wireless | added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD; |
| wireless | allow using "canada2" regulatory domain on US lock devices; |
| wireless | fixed 802.11n rate selection when managed by CAPsMAN; |
| wireless | fixed RX chain selection; |
| wireless | fixed sensor MAC address reporting in TZSP header; |
| wireless | improved 802.11ac stability for all ARM devices with wireless; |
| wireless | improved IPQ4019, QCA9984, QCA9888 wireless interface stability; |
| wireless | updated "ukraine" regulatory domain information; |
| wireless | updated "united-states" regulatory domain information; |