Component: lte
629 changelog entries across 112 version(s)
Activity over time (changelog entries per month)
- fixed issue for Chateau 5G R17 ax (introduced in v7.21.1);
- fixed APN configuration for QMI modems in a 3G network when use-network-apn=yes is used;
- added support for R11e-LTE6 v039 firmware release;
- added "force-delete" command to allow deletion of active eSIM profiles;
- added additional logging for error reported by modem during APN profile setup;
- added command to send out EUICC generated notifications manually;
- added confirmation prompt when deleting eSIM profile;
- added support for additional D-Link DWM-222 variation (vendor-id="0x2001" device-id="0x7e46");
- added support for additional Huawei E3372-325 variation (vendor-id="0x3566" device-id="0x2001");
- added support for R11e-LTE6 v039 firmware release and availability notification;
- ask for user confirmation before installing eSIM profile;
- clear SIM not present error when performing modem FW upgrade;
- discontinued support for RBSXTLTE3-7, further versions will use v7.20 LTE firmware package;
- do not retry activation for IPv4 and IPv6 APNs on QMI modems if only one address family is assigned;
- fixed cases where LTE monitor could show abnormalities;
- fixed LTE interface IPv6 address generation to use EUI-64 (introduced in v7.20);
- fixed MTU inheritance from master interface in multi-APN setups;
- fixed MTU setting for AT modems;
- fixed no re-connection after cellular network requested APN deactivation on Chateau 5G ax R17;
- force sms-protocol to AT for FG621-EA modem;
- improved AT modems at-chat control channel handling after modem has closed AT channel unexpectedly;
- improved modem recovery for Chateau 5G and Chateau 5G R16;
- improved stability for FG621-EA modem;
- improved system stability when receiving SMS messages;
- provide firmware download URL when no LTE package installed on "SXT LTE3-7";
- relay EUICC generated notifications after profile enable/disable/remove/provision;
- rework multiapn support for AT modems;
- unify "SIM not present" status for all modems;
- fixed LTE interface IPv6 address generation to use EUI-64 (introduced in v7.20);
- fixed no re-connection after cellular network requested APN deactivation on Chateau 5G ax R17;
- fixed LED behavior for Chateau 5G R17 ax;
- fixed issue with firmware update for FG621-EA modem;
- added "done" status for modem firmware-upgrade version check;
- added "remove-sent-sms-after-send" option to automatically delete sent SMS messages;
- added log entry if eSIM has no profiles on read;
- added modem-init string response to system log;
- added passthrough support for RG650E-EU modem;
- added show-capabilities eSIM presence detection for MBIM modems;
- allow only one IPv6 APN for AT modems;
- display ICCID regardless of SIM PIN entry status;
- do not reconfigure modem if deactive eSIM profile is deleted;
- exempt eSIM provision from global CRL certificate settings;
- exit LTE scan if modem reconfigured;
- fallback to RA for global IPv6 if unattained via AT channel (resets on config change);
- fixed inappropriate LTE interface inactive flag shown during modem initialization;
- fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16;
- fixed progress message for R11e-LTE modem firmware-upgrade;
- fixed rare case where AT dialer could stop;
- improved EC200A-EU firmware-upgrade stability;
- improved SMS sending stability over MBIM protocol;
- refresh eSIM profile list after successful provision;
- renamed "uicc" to "iccid" in LTE monitor and eSIM profile print;
- show ip-type in /interface/lte/apn/print;
- use modem-supplied IPv6 address over EUI-64 when available;
- fixed wrong subnet mask set to Chateau 5G R17 ax LTE interface;
- AT modems, fixed typos in commands sent to modem when APN with authentication is used (AT+CGAUTH; AT$QCPDPP);
- R11e-LTE and R11e-LTE6, fixed possible crash on device unexpected removal or during RouterOS shutdown;
- added support for R11e-LTE6 v039 firmware release;
- do not dial further if modem detects eSIM without profiles;
- fixed eSIM management function for mmips and mipsbe architecture CPUs;
- fixed eSIM provisioning for servers that do not send content-length in the HTTP response;
- added UICC parameter in LTE monitor for R11e-4G modem;
- additional fixes for eSIM management support;
- AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
- automatically enable roaming for known roaming only SIM/eSIM profiles;
- Chateau 5G R16 fix DHCP relay packet forwarding using LTE interface;
- deactivate current eSIM profile before activating new profile;
- fixed default APN for configless modems;
- fixed EC200A-EU APN authentication;
- fixed initialization for Neoway N75 modem;
- fixed initialization for R11e-LTE6 modem;
- fixed LTE passthrough activation issue when IPv6 APN is used;
- fixed LTE status update or possible crash when modem is unexpectedly removed from system;
- fixed MBIM modem recovery after modem unexpected restart;
- fixed modem recovery after firmware upgrade for R11e-LTE modem;
- fixed possible crash or missing IPv6 address on first APN activation when IPv6 capable APN is used;
- fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
- improved dialer for EC200A-EU modem;
- improved R11e-LTE6 link recovery delay time after unexpected modem registration status changes;
- initial support for user settable modem redial timer;
- initialize Quectel modems as soon as they are ready after unexpected restart;
- reset internal link-recovery-timer on sim slot change;
- set apn profile name the same as apn if no name specified when creating the profile;
- show correct value for 5G SA "current-cellid";
- additional fixes for eSIM management support;
- AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
- fixed modem recovery after firmware upgrade for R11e-LTE modem;
- fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
- added at-chat support for EC21EU;
- added basic support for Quectel RG255C-GL modem in "at+qcfg="usbnet",0" USB composition;
- added confirmation-code parameter for eSIM provisioning;
- added initial eSIM management support;
- fixed cases where the MBIM dialer could get stuck;
- fixed Huawei ME909s-120 support;
- fixed interface recovery in mixed multiapn setup for MBIM modems;
- fixed missing 5G info for "/interface lte print" command;
- fixed missing IPv6 prefix advertisement on renamed LTE interfaces;
- fixed prolonged reboots on Chateau 5G ax;
- fixed SIM slot initialization with multi-APN setups;
- improved automatic link recovery and modem redial functions;
- improved initialization for external USB modems;
- lte monitor, show CQI when modem reports it as 0 - undetectable, no RX/down-link resource block assigned to modem by provider;
- R11eL-EC200A-EU fixed online firmware upgrade and added support for firmware update from local file;
- R11eL-EC200A-EU improved failed connection handling and recovery;
- reduce modem initialization time for R11e-LTE-US;
- reduced SIM slot switchover time for modems with AT control channel (except R11e-LTE);
- removed nonexistent CQI reading for EC200A-EU modem;
- added option to check/install modem firmware from early-access/testing channel (CLI only);
- added provider specific firmware update (FOTA) for Cosmote GR networks on Chateau 5G;
- disabled ims service for Chateau 5G on operator "3 AT" network (PLMN ID 23205);
- drop operator selection support for R11e-4G modem as it is unreliable;
- fixed "default-name" property in export when multiple LTE interfaces are used;
- fixed "lte monitor" signal reporting for RG520F-EU modem when connected to 5G SA network;
- fixed "operator" setting for EC200A-EU modem;
- fixed long "PLMN search in progress" for SXT 3-7;
- fixed LTE band setting for SXT LTE 3-7;
- fixed roaming barring (allow-roaming=no) for EC200A-EU modem;
- fixed signal info reporting for FG621-EA modem in UMTS network;
- fixed SMS sender parsing;
- improved modem FW upgrade for Chateau 5G;
- improved R11eL-EC200A-EU modem firmware upgrade procedure;
- improved recovery after unexpected modem reboot for Chateau's 5G and 5G R16 series devices;
- improvements to modem "firmware-upgrade" command;
- MBIM increased assignable APN profile count up to 8 then modem firmware allows it;
- modem firmware update (FOTA), added support to install provider specific version;
- removed trailing "F" symbol from uicc;
- set "sms-read=no" and "sms-protocol=auto" as default values;
- set IPv6 address reporting format in modem init for AT modems and MBIM modems with AT channel;
- added "sms-protocol" setting in "/interface lte" menu (CLI only);
- fixed "at-chat" for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- fixed modem firmware upgrade for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed support for Fibocom modem fm150-na;
- improved modem AT/modem port open;
- improvements to "/interface/lte/show-capabilities" command;
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- added "at-chat" support for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- added support for concatenated AT commands in "modem-init" string;
- added support to set "modem-init" string for "dialer-less" modems;
- apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G;
- do not show persistent interfaces for multi-apn slave interfaces;
- dropped support for R11e-LTE-US FOTA firmware update;
- fixed R11e-LTE-US modem dial-up;
- fixed situation where link is not restored after Quectel MBIM modem firmware update;
- improved FG621-EA modem APN authentication;
- make interface persistent (unused interface configs can be removed, allow to export and examine current configuration without the device present);
- removed 2 APN restriction for RG520F-EU modem;
- use the correct network interface for multi-interface LTE modems;
- fixed firmware upgrade not found issue for Chateau LTE12 (introduced in v7.14.1);
- fixed R11e-LTE-US modem dial-up;
- added "at-chat" support for Sierra Wireless EM9293 5G modem;
- added AT channel support for Quectel EM120K-GL modem;
- added redial timer when the MBIM modem fails to register or does not receive APN activation notification;
- don't duplicate primary band in 5G SA mode for chateau 5G;
- fixed "use-peer-dns" setting for EC200A modem;
- fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address;
- fixed APN authentication for FG621-EA modem;
- fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13);
- fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions;
- fixed Simcom modem support in 0x9001 USB composition;
- fixed support for config-less modem detection (introduced in v7.13);
- fixed USB mode switch and initialization race condition for configless USB modems;
- improved FG621-EA modem firmware upgrade;
- improved modem recovery after failed IPv4 configuration;
- improved support for "ACER" and "MSFT" branded EM12-G modems;
- optimized "at-chat" response reading;
- refactored AT command control for AT modems;
- fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions (introduced in v7.13);
- fixed Simcom modem support in 0x9001 USB composition;
- improved SIM PIN unlock event handling for MBIM FG621-EA;
- fixed cases where FG621-EA modem could be missing signal information in "lte monitor" (introduced in v7.13);
- fixed support for config-less modem detection (introduced in v7.13);
- fixed USB mode switch and initialization race condition for configless USB modems;
- added RNDIS support for neoway N75-EA modem;
- added support for FOTA firmware upgrade from custom URL for R11eL-FG621-EA;
- disabled IMS service for Chateau 5G on A1 HR network;
- fixed rare cases where Chateau 5G in passthrough mode may stop forwarding packets;
- improved SIM slot status change notification handling for MBIM modems;
- replaced "passthrough-subnet-selection" with "passthrough-subnet-size" setting (CLI only);
- show each CA band in a new line;
- added at-chat support and increased wait time on modem at-chat for Dell DW5821e, DW5821e-eSIM, DW5829e and DW5829e-eSIM;
- added SINR reporting for FG621-EA modem;
- changed R11e-LTE ARP behavior to NoArp;
- fixed 5G data-class reporting for Chateau 5G;
- fixed APN authentification in multi APN setup for R11e-LTE6;
- fixed FG621-EA possible timeouts during firmware upgrade;
- fixed IPv6 prefix for MBIM modems in multi-apn setup when IPv6 APN used as not first APN;
- fixed RSSI for FG621-EA modem to show the correct value;
- fixed Sierra modem detection for modems with vendor-specific USB descriptors;
- fixed Sierra modem initialization;
- fixed startup race condition when SIM card is in "up" slot for LtAP mini;
- fixed sub-interface auto-removal in multiple APN setups;
- show correct data class when connected to 5G SA network;
- use more compact logging messages;
- fixed startup race condition when SIM card is in "up" slot for LtAP mini;
- added "at-chat" support for Dell DW5821e-eSIM modem;
- added "at-chat" support for Dell DW5829 modem;
- added "at-chat" support for Fibocom L850-GL modem;
- added "at-chat" support for SIMCom 8202G modem;
- added "band" info to the "monitor" command for MBIM modems that support serving cell info reporting over MBIM;
- added extended support for Neoway N75 modem;
- fixed Dell DW5821e "at-chat" support;
- fixed LtAP mini default SIM slot "down" changeover to "up" after an upgrade (introduced in v7.10beta1);
- fixed NR SINR reporting for Chateau 5G;
- fixed R11e-LTE, R11e-LTE6 legacy 2G/3G RAT mode selection;
- fixed Telit LE910C4 "at-chat" support;
- improved initial interface startup time for SXT LTE 3-7;
- improved system stability when changing the "radio" state for MBIM modems;
- only listen to DHCP packets for LTE passtrough interface in auto mode when looking for the host;
- added serving cell query for MBIM modems with necessary MBIM extension;
- disable DHCP request filtering (UDP port 67) for Chateau 5G;
- fixed APN authentication for R11e-LTE6 modem;
- fixed Google Pixel 7 tethering support;
- improved MBIM modem firmware reported error handling when settings RAT modes;
- improved modem firmware upgrade stability for MBIM modems;
- improved stability for Chateau 5G LTE modem firmware upgrade;
- reduced SIM slot switchover time for MBIM modems with UUIC reset support;
- stop "cell-monitor" on LTE interface configuration change for MBIM modems;
- capped maximum lifetime of SLAAC address to 1 hour;
- fixed CA band clearing on RAT mode change;
- fixed duplicate IPv6 route for lte interface when "ipv6-interface" setting is used;
- fixed LTE interface not showing up when resetting RouterOS configuration;
- fixed passthrough mode when used together with another APN for Chateau 5G;
- fixed R11-LTE-US in LTE passthrough mode;
- fixed R11e-LTE-US reporting of RSSI in LTE mode;
- fixed re-attach in some cases where module would stay in not-running state after network detach;
- fixed second modem halt on dual R11e-LTE6 setup;
- improved system stability when changing LTE interface configuration during network scan with MBIM modems (introduced in v7.8);
- added AT support for Telit LE910C4 in MBIM mode;
- fixed APN setting usage on initial connection attempt for AT based Quectel and Neoway modems;
- fixed automatic antenna selection on Chateau LTE12/LTE18;
- fixed dialing for Fibocom L850-GL module;
- fixed displaying of "subscriber-number";
- fixed possible memory leak when using passthrough mode on Chateau 5G;
- improved AT port matching for SIMCom, Huawei, WeLink, Cinterion, BandLuxe and Sierra modems;
- improved modem detection speed in lower mini-PCIe slot on LtAP;
- improved stability for R11e-LTE6, skip connection reset on first EEMGINFO command timeout;
- LtAP improved modem detection in lower mini-PCie slot ("/system routerboard upgrade" required);
- parse USSD even if encoding is unsupported;
- added AT channel support for Telit FN990;
- added CA information in 5G mode;
- fixed error handling on opening AT control channel;
- fixed new MTU value validation;
- improved stability when LTE passthrough is enabled on Chateau 5G;
- properly show leading zeros in MCC and MNC strings;
- show band number in "ca-band" in NSA mode on Chateau 5G;
- use RSRP value reported by MBIM signal for MBIM type modems;
- added interface name in MTU debug logging message;
- added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
- added support for Neoway N75-EA;
- added support to perform FOTA upgrade from local file for EG12-EA, EG18-EA, RG502Q-AE, EG06-A, EP06-A modems;
- disabled RPLMN on Chateau 5G;
- fixed at-chat on Telit FN980m;
- fixed handover from UMTS to LTE when PS activation had failed for MBIM modems;
- fixed MBIM modem initialization;
- fixed re-attaching on PS detach for MBIM modems;
- removed reconnect delay after receiving DETACH notification for MBIM modems;
- added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
- added at-chat support for Simcom modems, USB composition (device id - 0x9005);
- added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
- changed cell ID info display to short format for 3G connections;
- disallow empty APN name only for default entry;
- fixed AT channel for Sierra Wireless modems with device ID 0x9091;
- fixed LTE interface presence for Telit LN940;
- fixed UDP performance on MMIPS devices;
- improved antenna scan for Chateau devices with switchable antennas;
- improved configuration export when multiple LTE interfaces are present;
- modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
- added AT chat support for Dell dw5821e modem;
- fixed LTE interface running state after modem reconnection;
- fixed Telit AT interface numbering;
- improved LTE interface detection for LtAP-2HnD devices;
- keep MBIM working even if AT channel fails to respond in the initialization stage;
- request connect with the same IP type as in LTE attach status for MBIM;
- show current value for "antenna" parameter when auto antenna selection fails;
- validate LTE attached IP type in MBIM mode;
- added SMS sending support for MBIM protocol;
- added support for generic PXA1802 based modems;
- allow only MCC/NMC format in "operator" parameter;
- clear SIM values when modem in "stopped" state;
- disabled extended signal info query for Telit LN940 module;
- disabled wait for LTE auto attach;
- expose diagnostics channel for all modems;
- fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
- fixed Sierra MC7455 modem initialization;
- hide slave interfaces from export;
- improved LTE interface initialization process on LtAP-2HnD;
- improved stability when configuring multiple APN's at the same time in MBIM mode;
- improved stability when upgrading LTE firmware on Chateau 5G;
- added SMS sending support for MBIM protocol;
- added support for generic PXA1802 based modems;
- disabled wait for LTE auto attach;
- hide slave interfaces from export;
- improved stability when upgrading LTE firmware on Chateau 5G;
- add IPv6 address on interface as well;
- added 3 APN profile support and APN name re-using on R11e-LTE6;
- added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
- added basic information support for Telit LM960 and LM940 in MBIM mode;
- added class based support for configless RNDIS LTE modems;
- added support for Uplink CA reporting;
- changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
- do not loose "band" configuration after reboot on Chateau 5G;
- do not show external antenna selector on devices that does not support it;
- enabled multi-APN and name re-use support for Chateau;
- expose diagnostics channel for all modems;
- fixed "monitor" command to not report old info;
- fixed AT command response handling on R11e-LTE;
- fixed IPv6 address addition after startup on R11e-LTE6;
- fixed MBIM modem reset on AT timeout;
- fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
- fixed packet forwarding on R11e-4G and R11e-LTE-US;
- fixed possible timeouts when sending SMS in LTE only mode on R11e-LTE;
- fixed support for Sierra MC7710;
- fixed support for Telit 960;
- improved stability on "+EGMR" response in MBIM mode;
- improved stability when modem disappears during firmware upgrade;
- improved support for sending/receiving SMS in LTE only mode on R11e-LTE6;
- made "no" the default value for "use-network-apn" parameter;
- properly recognize MBIM modem in USB port as LTE on Chateau 5G;
- made "no" the default value for "use-network-apn" parameter;
- made "RG502QEAAAR11A06M4G" the last OTA firmware version update for Chateau 5G in RouterOS 7.1.x release tree;
- added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
- added class based support for configless RNDIS LTE modems;
- expose diagnostics channel for all modems;
- fixed IPv6 address addition after startup on R11e-LTE6;
- fixed packet forwarding on R11e-4G and R11e-LTE-US;
- fixed support for Sierra MC7710;
- improved stability on "+EGMR" response in MBIM mode;
- properly recognize MBIM modem in USB port as LTE on Chateau 5G;
- improved RSSI reporting on R11e-LTE6;
- added support for Sharp 809SH;
- fixed "earfcn" to band translation for "cell-monitor";
- fixed "earfcn" to band translation for "cell-monitor";
- added "age" column and "max-age" parameter to "cell-monitor" (CLI only);
- added "comment" parameter for APN profiles;
- added support for Alcatel IK41VE1;
- fixed "band" value reporting;
- increased "at+cops" reply timeout to 90 seconds;
- fixed multiple APN passthrough on R11e-4G;
- limit allowed APN count to 3 on R11e-LTE;
- fixed multiple APN passthrough on R11e-4G;
- improved EARFCN reporting in 3G and LTE modes on Sierra modems;
- limit allowed APN count to 3 on R11e-LTE;
- fixed modem initialization when multiple modems are used simultaneously;
- fixed PDP authentication configuration for SIM7600;
- improved stability during firmware upgrade;
- fixed multiple passthrough APN default route installation;
- fixed RSCP value reporting;
- validate interface existence on initiation;
- fixed dynamic DHCP client creation when editing APN profile;
- added support for MTS 8810FT;
- fixed modem initialization when multiple modems are used simultaneously;
- fixed PDP authentication configuration for SIM7600;
- added support for Huawei K5161 modem;
- added support for NEOWAY N720;
- added support for multiple passthrough APN configuration;
- do not allow running "scan" on R11e-4G;
- fixed "allow-roaming" setting when using LTE network mode on R11e-LTE;
- fixed "band" parameter persistence after disable/enable;
- fixed "ecno" and "rscp" value reporting on R11e-LTE6;
- fixed VLAN interface passthrough support;
- fixed multiple APN reactivation after deactivation by operator;
- improved stability during firmware upgrade;
- made "mac-address" parameter read-only;
- show "phy-cellid" value only in LTE mode;
- added "phy-cellid" value support for LTE-US;
- fixed IP type selection from APN on RBSXTLTE3-7;
- improved system stability when performing firmware update on R11e-LTE6;
- fixed "band" value setting when configuration is reset on R11e-4G;
- fixed IP type selection from APN on RBSXTLTE3-7;
- added interface name prefix for logging events;
- added "phy-cellid" value support for R11e-LTE-US;
- do not allow using empty APN Profile names;
- improved all APN session activation after disconnect on R11e-LTE;
- use APN from network when blank APN used on R11e-4G;
- added GPS port support for Quectel EP06 modem;
- added "psc" (Primary Scrambling Code) parameter for "cell-monitor" function on R11e-LTE6 and R11e-LTE;
- do not show invalid "phy-cellid" when it is not yet received on "R11e-LTE";
- do not show unrelated info parameters after network mode failover;
- show SIM error when no card is present;
- fixed "cell-monitor" on R11e-LTE in 3G mode;
- fixed "earfcn" reporting on R11e-LTE6 in UMTS and GSM modes;
- report only valid info parameters on R11e-LTE6;
- do not reset modem when setting the same SIM slot on LtAP;
- show SIM error when no card is present;
- added support for D402 modem;
- added support for LM960A18;
- added support for Telit LM960 and LE910C1 modems;
- do not allow setting 3G and GSM modes on LTE only modems;
- fixed band setting on R11e-4G;
- fixed network registration on R11e-LTE-US;
- fixed Sierra WP7601 driver loading;
- fix "operator" names not being displayed properly;
- improved modem initialization;
- show "primary-band" only for LTE modems;
- use /128 prefix for IPv6 address on LTE interface;
- use interface from RA when "ipv6-interface=none" and IPv6 enabled;
- fixed modem not receiving IP configuration when roaming (introduced in v6.45);
- fixed cell information monitoring on R11e-LTE-US (introduced in v6.45.2);
- fixed LTE interface disappearing on RBSXTLTE3-7;
- added initial support for Vodafone R216-Z;
- added passthrough interface subnet selection;
- added support for manual operator selection;
- allow setting empty APN;
- allow to specify URL for firmware upgrade "firmware-file" parameter;
- do not show error message for info commands that are not supported;
- fixed session reactivation on R11e-LTE in UMTS mode;
- improved firmware upgrade process;
- improved "info" command query;
- improved R11e-4G modem operation;
- renamed firmware upgrade "path" command to "firmware-file" (CLI only);
- show alphanumeric value for operator info;
- show correct firmware revision after firmware upgrade;
- use default APN name "internet" when not provided;
- use secondary DNS for DNS server configuration;
- reset LTE modem only when SIM slot is changed on dual SIM slot devices;
- use default APN name "internet" when not provided;
- reset LTE modem only when SIM slot is changed on dual SIM slot devices;
- do not show "session-uptime" if session is not up;
- fixed LTE interface band setting on RBSXTLTE3-7 (introduced in v6.44);
- do not show "session-uptime" if session is not up;
- improved SIM7600 initialization after reset;
- added additional ID support for Novatel USB730L modem;
- added "cell-monitor" command for R11e-LTE international modem (CLI only);
- added "ecno" field for "info" command;
- added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
- added initial support for multiple APN for R11e-4G (new modem firmware required);
- added initial support for Telit LN940;
- added multiple APN support for R11e-4G;
- added option to lock the LTE operator;
- added support for JioFi JMR1040 modem;
- fixed connection issue when LTE modem was de-registered from network for more than 1 minute;
- fixed DHCP IP acquire (introduced in v6.43.7);
- fixed DHCP relay packet forwarding when in passthrough mode;
- fixed IPv6 activation for R11e-LTE-US modems;
- fixed Jaton/SQN modems preventing router from booting properly;
- fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- fixed missing running (R) flag for Jaton LTE modems;
- fixed passthrough DHCP address forward when other address is acquired from operator;
- fixed reported "rsrq" precision (introduced in v6.43.8);
- improved compatibility for Alt38xx modems;
- improved SIM7600 initialization after reset;
- improved SimCom 7100e support;
- query "cfun" on initialization;
- require write policy for at-chat;
- update firmware version information after R11e-LTE/R11e-4G firmware upgrade;
- disallow setting LTE interface as passthrough target;
- fixed DHCP IP acquire (introduced in v6.43.7);
- fixed passthrough functionality when interface is removed;
- increased reported "rsrq" precision;
- reset USB when non-default slot is used;
- added support for more ZTE MF90 modems;
- disallow setting LTE interface as passthrough target;
- added support for more ZTE MF90 modems;
- fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- fixed LTE registration in 2G/3G mode;
- fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- added additional D-Link PIDs;
- added additional ID support for SIM7600 modem;
- added additional low endpoint SIM7600 PIDs;
- added eNB ID to info command;
- added extended LTE signal info for SIM7600 modules;
- added extended signal information for Quectel LTE EC25 and EP06 modem;
- added ICCID reading for info command R11e-LTE and R11e-LTE-US;
- added "registration-status" parameter under "/interface lte info" command;
- added roaming status reading for info command;
- added "sector-id" to info command;
- added support for alternative SIM7600 PID;
- added support for Novatel USB730LN modem with new ID;
- added support for Quanta 1k6e modem;
- allow to execute concurrent internal AT commands;
- allow to use multiple PLS modems at the same time;
- do not allow to remove default APN profile;
- do not allow to send "at-chat" commands for configless modems;
- expose GPS channel for PLS modems;
- fixed LTE registration in 2G/3G mode;
- fixed SIM7600 registration info;
- fixed SIM7600 series module support with newer device IDs;
- ignore empty MAC addresses during Passthrough discovery phase;
- improved modem event processing;
- improved r11e-LTE and r11e-LTE-US dialling process;
- improved r11e-LTE configuration exchange process;
- improved reading of SMS message after entering running state;
- improved readings of info command results for the SXT LTE;
- improved stability of USB LTE interface detection process;
- properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
- renamed LTE scan tool field "scan-code" to "mcc-mnc";
- show UICC in correct format for SXT LTE devices;
- use "/32" address for the Passthrough feature when R11e-LTE module is used;
- use alphanumeric operator format in info command;
- added signal readings under "/interface lte scan" for 3G and GSM modes;
- fixed memory leak on USB disconnect;
- fixed SMS send feature when not in LTE network;
- fixed automatic LTE band selection for R11e-LTE;
- improved LTE communication process on MMIPS platform devices;
- allow to send "at-chat" command over disabled LTE interface;
- added initial support for Quectel LTE EP06-E;
- added initial support for SIM7600 LTE modem interface;
- added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
- do not add DHCP client on LTE modems that doesn't use DHCP;
- fixed DHCP client adding for MF823 modem;
- fixed LTE band setting for SXT LTE;
- fixed r11-LTE-US interface initialization process after reboot;
- added "/interface lte apn" menu (Passthrough requires reconfiguration);
- added Passthrough support;
- added Yota non-configurable modem support;
- added support for ZTE ME3630 E1C with additional "/port" for GPS usage;
- automatically add "/ip dhcp-client" configuration on interface;
- changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2";
- fixed Passthrough support;
- fixed authentication for non LTE modes;
- fixed error when trying to add APN profile without name;
- fixed rare crash when initializing LTE modem after reset;
- fixed user authentication for R11e-LTE when new firmware is used;
- integrated IP address acquisition without DHCP client for wAP LTE kit-US;
- limited minimal default route distance to 1;
- update info command with "location area code" and "physical cell id" values;
- do not reset modem when it is not possible to access SMS storage;
- fixed modem initialization after reboot;
- fixed PIN option after setting up the band;
- fixed modem initialization after reboot;
- do not show USB LTE modem under "/port" menu;
- fixed ethernet flap when LTE establishes connection;
- fixed SXT LTE graphs in QuickSet;
- improved reliability of USB LTE modems;
- fixed LTE not passing any traffic while in running state;
- improved info channel background polling;
- improved relialibility on SXT LTE;
- replaced "user-command" with "at-chat" command;
- added "session-uptime" in info command;
- added LTE signal level reading for Cinterion modems;
- added error handling for remote AT execute;
- added initial support for DWR-910 modem;
- added initial support for Quectel ec25;
- added initialization for Cinterion;
- added log entry for SMS delivery report;
- added support for Vodafone R216 (Huawei);
- buffer AT events while info command is active;
- fixed "/interface lte info X once";
- fixed IPv6 address prefix on interface
- fixed network mode selection for me909u, mu609;
- fixed older standard CEREG parsing;
- fixed support for Huawai R216;
- fixed user-command;
- reset interface stats on "link-down";
- increased delay when setting sms send mode;
- added support for more Vodafone K4201-Z, Novatel USB620L, PANTECH UML295 and ZTE MF90 modems;
- allow to execute concurrent info commands;
- fixed dwm-222, Pantech UML296 support;
- fixed init delay after power reset;
- increased delay when setting sms send mode;
- return info data when all the fields are populated;
- added ability to send/receive sms using '/tool sms';
- added dlink dwm-157 D, dwm-222 support;
- added huawei me909s variant;
- added initial deregistration only for bandrich modems;
- added logging for usb config switching;
- added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
- added rndis for ZTE MF8xx;
- added support for more dlink dwm-222 configurations;
- added switch for Huawei K5160;
- added zte K5008-Z back;
- adjusted usb config for dlink dwm-157 D;
- fixed at chat condition storage;
- fixed band setting for sxt lte;
- fixed band unsetting;
- fixed default channels for dlink dwm-157;
- fixed ip activation when CREG (circuit switched) state remains in not registered state;
- fixed setting correct lte band for sxt lte;
- process initial state change to deregistred, when lockup occurs;
- reset if sms storage set fails;
- fixed access technology update;
- added allow-roaming option for Huawei MU709, ME909s devices;
- added cinterion pls8 support;
- added support for Huawei E3531;
- added support for ZTE ZM8620;
- added use-peer-dns option (will work only combined with add-default-route);
- changed driver loading for class 2 usb rndis devices;
- display message in lte,error log if no response received;
- display message in lte,error log when PIN is required;
- fix crash on SXT LTE while resetting card while at high traffic;
- fixed access technology logging;
- fixed connection for Huawei without cell info;
- fixed modem init when pin request present;
- fixed modem network configuration version checks;
- fixed network-mode support after downgrade;
- Huawei MU609 must use latest firmware to work correctly;
- improved multiple same model modems identification;
- show uicc for Huawei modems;
- use only creg result codes as network status indications;
- use only creg result codes as network status indications;
- do not allow to set multiple modes when it is not supported;
- do not allow to set multiple modes when it is not supported;
- fixed address acquisition on Huaweii LTE interfaces;
- added ipv6 support for SXT LTE;
- changed AT command processing;
- changed AT parsing because supported Huawei modems use unsolicited events instead of polling;
- fixed bandlux modem dialing;
- fixed crash on early initialization;
- improve situation when SXT modem never finds operator;
- replaced signal-strength with rssi in info command;
- support Alt38XX modem;
- support for zte mf820s2;
- supported modems now use unsolicited events for network monitoring;
- use timer for modem info;
- fix allowed bands for RBSXTLTE3-7;
- improve support Sierra Wireless 320U;
- speed up first time connection to LTE network on SXT LTE;
- fixed info command for Cinterion EHS5-E modem;
- support serial port for DellWireless 5570;
- improved dhcp handling on interfaces that doesn't support it;
- make sure that both LTE miniPCI-e cards are recognized;
- added support for multiple E3372 on the same device;
- improve support Sierra Wireless 320U;
- speed up first time connection to LTE network on SXT LTE;
- improved modem identification to better support multiple identical modems;
- Fixes bug that causes Sierra Wireless modems with LTE interface to change interface name;
- improved modem identification to better support multiple identical modems;
- ZTE MF823 may loose configuration;
- changed device identification for devices which regenerate MAC address,
- provide signal strength using snmp and make 'info once' work in console;
- support for Huawei ME609 and ME909u-521;
- support YOTA WLTUBA-107;