Component: traffic-flow
35 changelog entries across 28 version(s)
Activity over time (changelog entries per month)
- added support for IPv6 packet sampling;
- fixed flow reports when using IPv6 and packet sampling (introduced in v7.18);
- detect IPv4 source address if not set;
- improved system stability;
- improved system stability;
- use 64bit counters for v9 and IPFIX flows;
- fixed sending of sampling interval;
- do not handle NAT events when "nat-events" is disabled;
- do not handle NAT events when "nat-events" is disabled;
- do not handle NAT events when "nat-events" is disabled;
- added systematic count-based packet sampling support;
- added "sys-init-time" parameter support;
- added NAT event logging support for IPFIX;
- added "postDestinationMacAddress" parameter support for IPFIX and NetFlow v9;
- reduced minimal value of "active-flow-timeout" parameter to 1s;
- fixed post NAT port reporting;
- fixed "src-mac-address" and added "post-src-mac-address" fields;
- fixed post NAT port reporting;
- fixed "src-mac-address" and added "post-src-mac-address" fields;
- fixed post NAT port reporting;
- fixed IPv6 destination address value when IPFIX protocol is used;
- fixed IPv6 destination address value when IPFIX protocol is used;
- do not count single extra packet per each flow;
- do not count single extra packet per each flow;
- fixed reboots when IPv6 address has been set as target address without active IPv6 package;
- fixed reboots when IPv6 address has been set as target address without active IPv6 package;
- fixed IPFIX IPv6 data reporting;
- fixed IPFIX IPv6 data reporting;
- fixed flow sequence counter and length;
- fixed dst-port reporting if connection is not maintained by connection tracking;
- allow ipv6 src address to be optional;
- fixed IPFIX packet timestamp;
- fixed IPFIX wrong flow sequence;
- fixed kernel failure when traffic-flow target uses small mtu;
- added ipfix support (RFC5101 and RFC5102);