Component: poe

7.11 Stable 2023-Aug-15 (2 years ago)

• fixed missing PoE configuration section under specific conditions;

7.10 Stable 2023-Jun-15 (2 years ago)

• fixed bogous "poe-in-voltage" values when using DC jack for RB5009;

7.8 Stable 2023-Feb-24 (2 years ago)

• added LLDP power management support for 802.3at PSE;
• properly turn off power when link not detected on hAP ax2 and hAP ax3;

7.4 Stable 2022-Jul-19 (3 years ago)

• hide "poe-voltage" parameter on devices that do not support it;

7.2 Stable 2022-Mar-31 (3 years ago)

• fixed PoE driver loading on CRS354-48P-4S+2Q+;
• update PoE firmware only on devices that support it;

6.49 Stable 2021-Oct-06 (4 years ago)

• update PoE firmware only on devices that supports it;

6.48.5 Long-term 2021-Sep-21 (4 years ago)

• update PoE firmware only on devices that supports it;

6.47.10 Long-term 2021-May-31 (4 years ago)

• do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;

6.48.2 Stable 2021-Apr-09 (4 years ago)

• do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;

6.46.8 Long-term 2020-Oct-29 (5 years ago)

• fixed automatic PoE firmware upgrade procedure;
• improved PoE-out status detection;

6.47.7 Stable 2020-Oct-27 (5 years ago)

• fixed automatic PoE firmware upgrade procedure;
• improved PoE-out status detection;

6.46.7 Long-term 2020-Sep-07 (5 years ago)

• fixed "power-cycle" functionality on hEX PoE, PowerBox Pro and OmniTIK 5 PoE ac;

6.47.3 Stable 2020-Sep-01 (5 years ago)

• fixed "power-cycle" functionality on RB960GSP;

6.42 Stable 2018-Apr-13 (7 years ago)

• do not show "poe-out-current" on devices which can not determine it;
• hide PoE related properties on interfaces that does not provide power output;

6.41.4 Stable 2018-Apr-05 (7 years ago)

• do not show "poe-out-current" on devices which can not determine it;
• hide PoE related properties on interfaces which does not provide power output;

6.41 Stable 2017-Dec-22 (8 years ago)

• added new "poe-out" status "controller-error";
• fixed false positive excessive logs in auto-on mode when connected to 100 Mbps device powered from another power source;
• log PoE status related messages under debug topic;

6.7 Stable 2013-Nov-29 (12 years ago)

• new poe controller firmware for RB750UP and OmniTIK UPA;