Component: poe-out

7.20.8 Long-term 2026-Jan-30 (4 days ago)

• firmware update for 802.3bt capable boards (the update will cause a brief power interruption to poe-out interfaces);
• fixed PSU state recovery upon unplug/replug on CRS320;

7.21.2 Stable 2026-Jan-29 (5 days ago)

• firmware update for 802.3at capable boards (the update will cause a brief power interruption to poe-out interfaces);
• firmware update for 802.3bt capable boards (the update will cause a brief power interruption to poe-out interfaces);
• fixed occasional firmware update failure on CRS354;
• fixed PSU state recovery upon unplug/replug on CRS320;

7.21 Stable 2026-Jan-12 (3 weeks ago)

• added input name hint to poe max-power settings;
• added LED blink on error for RB5009;
• firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces);
• fixed CRS354 misreporting approved LLDP power;
• improved firmware update stability;
• improved power-on mechanism for 802.3at capable boards;

7.20.2 Stable 2025-Oct-21 (3 months ago)

• fixed RB5009 PoE-in indication on cold-boot with no other power source;

7.20 Stable 2025-Sep-29 (4 months ago)

• added support for line-interactive and offline UPS on CRS320;
• firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces);
• firmware update for 802.3bt capable boards (the update will cause brief power interruption to poe-out interfaces);
• improved dual-signature detection on CRS320;
• improved short-circuit detection and reporting on CRS320;
• increased maximum power margin for all classes on CRS320;

7.19.6 Stable 2025-Sep-12 (4 months ago)

• added "poe-in" detection for 802.3at poe-out capable ports;
• firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces);
• fixed "low-voltage" LLDP deny for RB5009 and RB960 in specific voltage/power-source combinations;
• fixed missing error status report in rare cases for 802.3at;

7.19.1 Stable 2025-May-23 (8 months ago)

• fixed PoE-out reset when inserting specific SFP modules on RB5009;
• upgraded firmware for 802.3at PSE controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.19 Stable 2025-May-22 (8 months ago)

• upgraded firmware for 802.3at/bt PSE controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.18.1 Stable 2025-Feb-28 (11 months ago)

• fixed health showing 0V voltage when using PoE-in for RB960;
• upgraded firmware for 802.3at/bt PSE controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.18 Stable 2025-Feb-24 (11 months ago)

• added "power-pair" info to poe-out monitor (CLI only);
• added console hints;
• added new modes "forced-on-a" and "forced-on-bt" (CLI only);
• upgraded firmware for 802.3at/bt PSE controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.17 Stable 2025-Jan-16 (1 year ago)

• added low-voltage-too-low status;
• improved PoE-out configuration handling when doing reset-configuration command;
• upgraded firmware for CRS354-48P-4S+2Q+ device (the update will cause brief power interruption to PoE-out interfaces);
• upgraded firmware for PSE (BT) controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.16 Stable 2024-Sep-20 (1 year ago)

• fixed low-voltage detection while PD is connected for KNOT device;
• fixed silent firmware upgrade fail on CRS112-8P-4S device (introduced in v7.15);
• upgraded firmware for SAMD20 PSE (AF/AT) controlled boards (the update will cause brief power interruption to PoE-out interfaces);

7.15.1 Stable 2024-Jun-07 (1 year ago)

• fixed silent firmware upgrade fail on CRS112-8P-4S device (introduced in v7.15);

7.15 Stable 2024-May-29 (1 year ago)

• added LLDP power management support for devices with single PoE-out port;
• fixed powering devices if input voltage is lower than 12V for hEX PoE (introduced in v7.9);
• improved firmware upgrade stability for AF/AT controlled boards;
• moved "PoE LLDP" property from "/interface/ethernet/poe" to "/ip/neighbor/discovery-settings" and enable it by default;

7.14 Stable 2024-Feb-29 (1 year ago)

• driver optimization for AF/AT controlled boards;
• fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13);
• improved 802.3at classification and measurement accuracy;
• improved cable test for hAP ac3 and hAP ax3 devices;
• improved PoE out reliability on routers with a single PoE out interface;

7.13.3 Stable 2024-Jan-24 (2 years ago)

• fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13);
• improved PoE out reliability on routers with a single PoE out interface;

7.13 Stable 2023-Dec-14 (2 years ago)

• improved firmware upgrade stability for AF/AT controlled boards;

6.49.11 Stable 2023-Dec-08 (2 years ago)

• improved "auto-on" mode for devices with single PoE-out port;

7.12 Stable 2023-Nov-09 (2 years ago)

• driver optimization for AF/AT controlled boards;
• fixed rare CRS328 poe-out menu and poe-out port config loss after reboot;
• improved "auto" mode for devices with single PoE-out port;
• removed "auto" mode support for L009 devices;

7.11 Stable 2023-Aug-15 (2 years ago)

• advertise LLDP power-mdi-long even if no power allocation was requested (introduced in v7.7);

6.40.3 Stable 2017-Sep-01 (8 years ago)

• fixed router reboot after "poe-out-status" changes;