|
arm64
|
allow enabling receive packet steering on /system/resource/irq/rps menu in order to overcome unbalanced CPU load; |
|
bgp
|
allow duplicate router-ids for eBGP sessions (RFC 6286); |
|
bgp
|
always advertise extended nexthop cap for all supported address families; |
|
bgp
|
do not allow iBGP with non-equal ASNs; |
|
bgp
|
fixed l2vpn-cisco decoding (introduced in v7.20); |
|
bgp
|
fixed occasional corruption of MPLS labels in BGP VPN update messages; |
|
bgp
|
fixed route refresh subcode 0 warning; |
|
bgp
|
fixed selection of received BGP VPN routes; |
|
bgp
|
implement RFC 9234 route leak prevention and detection using roles; |
|
bonding
|
added lacp-system-id and lacp-system-priority settings; |
|
bonding
|
fixed lacp-mode=passive; |
|
bonding
|
improved stability for 802.3ad LACP; |
|
bridge
|
expose more DHCP snooping warning logs; |
|
bridge
|
fixed dynamic switch-cpu VLAN creation (introduced in v7.20); |
|
bridge
|
fixed filter and NAT matching with "mac-protocol=length"; |
|
bridge
|
fixed missing local MAC after changing protocol-mode setting; |
|
bridge
|
fixed multicast packet receiving on bridge as multicast-router when HW offloading is used; |
|
bridge
|
fixed possible DHCP packet drop caused by the add-dhcp-option82; |
|
bridge
|
fixed possible MVRP issues when STP topology changes; |
|
bridge
|
fixed static host and MDB entry updates on VLAN add/remove; |
|
bridge
|
improved DHCP Option 82 values (circuit-id:"interface-name:vid", remote-id:"bridge MAC address"); |
|
bridge
|
improved stability after failed protocol-mode=mstp change; |
|
bridge
|
improved system stability when forwarding traffic with fast-path and bridged interface gets removed or disabled (introduced in v7.20); |
|
bridge
|
properly apply bridge MVRP settings on the fly; |
|
bth
|
added file-share link preview; |
|
bth
|
fixed big file upload; |
|
bth
|
fixed file-share expire after reboot; |
|
bth
|
make user private-key sensitive; |
|
certificate
|
added certificate "trust-store" parameter; |
|
certificate
|
added option to configure built-in trust store (replaced "builtin-trust-anchors" parameter); |
|
certificate
|
added SHA384, SHA512 support for SCEP; |
|
certificate
|
allow ca-crl-host parameter for issued certificates; |
|
certificate
|
fixed incorrect appearance of "invalid-before" and "invalid-after" dates; |
|
certificate
|
improved logging; |
|
certificate
|
on certificate import, added the "issued" flag if the certificate store contains the imported certificate's CA and its private key; |
|
certificate
|
refactored Certificate internal processes; |
|
chr
|
fixed guest OS type "Other Linux (64-bit)"; |
|
console
|
added "mvrp" to mac-protocol setting; |
|
console
|
added delimiter parameter to :toarray command; |
|
console
|
added fetch-changelog flag to check-for-updates command; |
|
console
|
added reset command to settings directories; |
|
console
|
added sensitive flag to QR code in WireGuard "show-client-config"; |
|
console
|
added show-sensitive option for print command, hide sensitive settings in print output by default; |
|
console
|
changed file id format; |
|
console
|
do not allow to set value as empty for arguments that require selection of a specific list entry; |
|
console
|
do not set values when "setup" command is interrupted; |
|
console
|
fixed :convert from=num on MIPSBE; |
|
console
|
fixed "special-login" setting incorrect channel; |
|
console
|
fixed autocomplete in fullscreen editor to append tabs, spaces, etc; |
|
console
|
fixed empty output in route menus when using "print where gateway"; |
|
console
|
improved :toip command to get IPv4 address from IPv4 CIDR address; |
|
console
|
improved :toip6 command to get IPv6 addresses from IPv6 prefixes; |
|
console
|
improved hints for address arguments; |
|
console
|
improved hints for DHCPv6; |
|
console
|
improved printing visuals (column layout and paging); |
|
console
|
improved stability; |
|
console
|
remove unnecessary commands from /ip/hotspot/active menu; |
|
console
|
removed /quickset menu; |
|
console
|
return error values for certain commands if action failed (e.g. /system/routerboard/upgrade); |
|
console
|
show fullscreen script editor completions above hintbar; |
|
console
|
updated "Change your password" to "Change your password (Ctrl-C to skip)"; |
|
console
|
updated copyright notice; |
|
container
|
add initial Bluetooth device support; |
|
container
|
added "/app" menu for simple containerized app installation (requires "container" package and enabled "container" device-mode); |
|
container
|
added CPU usage; |
|
container
|
added hosts setting; |
|
container
|
added kill command to send signals (CLI only); |
|
container
|
added option to limit CPUs used by containers; |
|
container
|
added root dir size; |
|
container
|
added run command to allow interactive mode (CLI only); |
|
container
|
added stop-time setting; |
|
container
|
added update command (CLI only); |
|
container
|
allow /tmp tmpfs to be unlimited in size; |
|
container
|
allow app network to be any bridge interface; |
|
container
|
allow to configure extra ENV variables directly in container; |
|
container
|
allow to disable/enable envs and mounts; |
|
container
|
allow to specify mounts directly in container; |
|
container
|
calculate volume sizes; |
|
container
|
convert container mounts setting to mountlists, old mount name becomes list name, list name can map to multiple mounts; |
|
container
|
do not allow layer-dir to be within some containers root-dir; |
|
container
|
enable relevant kernel features to support more container apps; |
|
container
|
fixed error for starting container which consists of large number of layers; |
|
container
|
fixed extract issues; |
|
container
|
fixed VETH when using long interface name; |
|
container
|
general container service stability fixes and improvements; |
|
container
|
have per container layer-dir setting to be able to have separate layer stores for different sets of containers; |
|
container
|
made it possible to set timeout on /container/shell; |
|
container
|
make sure a working directory is created if it does not exist; |
|
container
|
show detailed import status, helps understand long imports; |
|
container
|
show image-id field (CLI only); |
|
container
|
shows app URL and "running" status only when port is open; |
|
container
|
store image import data (allows keeping container after netinstall); |
|
detnet
|
do not try detection on slave interfaces; |
|
detnet
|
fixed unnecessary process starting even when feature is not enabled; |
|
dhcpv4-client
|
don't stop client on unsuccessful client option value change; |
|
dhcpv4-server
|
added "support-broadband-tr101" setting to pass additional Option 82 suboptions to RADIUS server; |
|
dhcpv4-server
|
added setting allowing to select client-id, MAC address and opt82 parameters for dynamic lease addition; |
|
dhcpv4-server
|
allow creating static DHCPv4 leases for VETH interfaces; |
|
dhcpv4-server
|
allow to set other gateway types not just IP for dhcp lease "routes" parameter; |
|
dhcpv4-server
|
improved logging; |
|
dhcpv4-server
|
improved setup wizard prompts relating to DNS; |
|
dhcpv4-server
|
respond with hlen 0 when htype is 8; |
|
dhcpv4-server
|
send RADIUS Accounting Stop messages when interim-update is zero; |
|
dhcpv6-client
|
do not show I flag for disabled client; |
|
dhcpv6-client
|
fixed misleading "couldn't acquire address, continue with prefix only" error when prefix is not even requested; |
|
dhcpv6-relay
|
added "about" error message option; |
|
dhcpv6-relay
|
enable configuration of options that are added to relayed DHCPv6 requests; |
|
dhcpv6-server
|
added accounting to use-radius setting, similar to DHCPv4 server; |
|
dhcpv6-server
|
attempt to extract MAC from DUID for dual-stack purposes when client uses DUID-EN type of DUID; |
|
dhcpv6-server
|
improved event logging messages; |
|
dhcpv6-server
|
improved service stability when receiving DHCP requests for PPP service clients without included IA_PD; |
|
dhcpv6-server
|
include traffic usage statistics when accounting is stopped due to binding expiry and removal; |
|
discovery
|
correctly report PoE dual signature per-pair class; |
|
discovery
|
fixed MNDP IPv6 status reporting; |
|
discovery
|
send out neighbor discovery immediately on IPv4/IPv6 changes; |
|
disk
|
added nvme-tcp-server-nqn setting to be able to explicitly configure NQN, will default to "nqn.2000-02.com.mikrotik:slot" for new configurations; |
|
disk
|
allow only lowercase chars in iscsi-server-iqn; |
|
disk
|
allow to have type=file devices without rose-storage (needed for file based swap); |
|
disk
|
allow to set smb-share only for type=smb; |
|
disk
|
consolidate client states into single field, as each item can be only one type of "client"; |
|
disk
|
do not allow setting raid-master when have filesystem; |
|
disk
|
do not allow starting Btrfs replace when replace is suspended; |
|
disk
|
do not delete partition configs on device remove and eject (fixes lost config with unstable hardware); |
|
disk
|
fixed iscsi client; |
|
disk
|
fixed iscsi export disable; |
|
disk
|
fixed issue with double "/" in SMB share path for some clients; |
|
disk
|
fixed SATA eject/scan; |
|
disk
|
fixed SMB mount to be writable by container; |
|
disk
|
fixed write RAID superblock; |
|
disk
|
improved cleanup order to avoid waiting for timeouts on shutdown; |
|
disk
|
improved RDS2216 SATA controller; |
|
disk
|
improved system stability; |
|
disk
|
rename nvme-tcp client name to nqn everywhere symmetrically with server; |
|
disk
|
show NVMe critical warnings; |
|
disk
|
unshare iscsi and nfs client/server ids, add iscsi-server-iqn; |
|
disk
|
update interface type/speed after scan; |
|
disk
|
use default label when nothing specified when formatting from WinBox; |
|
dns
|
added VRF support to ":resolve" command; |
|
dns
|
added VRF support to DNS servers; |
|
email
|
added "certificate-verification" parameter; |
|
email
|
return all errors to console when executed from console; |
|
eoipv6,gre6,ipip6
|
added "dont-fragment" setting to control packet fragmentation for packet sizes exceeding underlay interface MTU; |
|
ethernet
|
added "unsupported speed" warning for forced 1Gbps, 2.5Gbps, 5Gbps, 10Gbps baseT modes; |
|
ethernet
|
change default L2MTU 1518 to 1596 for RB5009; |
|
ethernet
|
fixed 2.5G-baseT link-partner-advertising on RB5009, hAP ax3, Chateau ax devices; |
|
ethernet
|
improved Ethernet port mapping to ensure a consistent and reliable interface order for wAP ax; |
|
ethernet
|
improved system stability for RB912, RB911 devices; |
|
evpn
|
fixed Ethernet Segment (ES) routes; |
|
fetch
|
added "http-percent-encoding" parameter; |
|
fetch
|
fixed http headers appearance when received payload is empty; |
|
fetch
|
send http-data for any http method; |
|
file
|
distinguish empty mount points from disks; |
|
file
|
improved error messages provided to GUI; |
|
file
|
improved stability and interoperability with WinBox and console; |
|
firewall
|
added "h" flag indicating that firewall service helper is applied for particular connection; |
|
firewall
|
added support for TOS/mask matching for raw rules; |
|
firewall
|
clear relevant masqueraded connection tracking entries on IP address change; |
|
firewall
|
fixed "tls-host" not matching expected hosts; |
|
firewall
|
fixed hotspot value loss on rule enable/disable; |
|
firewall
|
fixed strip-ipv4-options always passthrough; |
|
firewall
|
hide hw-offload setting from devices that do not support it; |
|
firewall
|
improved system stability and memory allocation when using firewall services; |
|
firewall
|
make hw-offload=yes default setting in /ip/firewall/filter menu; |
|
firewall
|
use the highest TTL as timeout value for domain address list entries if multiple domain names resolve to same IP; |
|
health
|
upgraded fan controller firmware to latest version; |
|
hotspot
|
added TOTP support for local hotspot users; |
|
hotspot
|
improved system stability; |
|
hotspot
|
prevent service from starting unnecessarily in the background on export/print commands; |
|
ike2
|
adapt rekey procedure for compatibility with Libreswan; |
|
iot
|
added LoRa Round Trip Time monitoring support; |
|
iot
|
added Modbus rx-switch-offset parameter which helps offset Rx window; |
|
iot
|
added mqtt disconnect/connect GUI options; |
|
iot
|
added support for Modbus port baud-rates from 9600 to 115200; |
|
iot
|
changed LoRa packet's timestamp format, which fixes duty cycle issues for some servers; |
|
iot
|
improved Modbus multi-write registers handling; |
|
ip-service
|
do not duplicate entries for containers running in same netns; |
|
ip-settings
|
limit IPv4/IPv6 max-neighbor-entries maximum value; |
|
ippool6
|
added "Valid Lifetime" and "Preferred Lifetime" options and use them when constructing IPv6 address; |
|
ippool6
|
fixed minor memory leak; |
|
ippool6
|
log address removal; |
|
ippool6
|
take into account "subnet-id" when specified on address; |
|
ipsec
|
fixed CHACHA20 typo in log messages; |
|
ipsec
|
support Post-Quantum Pre-shared Key (PPK) with QKD integration (CLI only); |
|
ipv6
|
added "none" option for IPv6/ND/Prefix when advertising just options, not prefix; |
|
ipv6
|
added "self" option for IPv6/ND DNS advertise settings; |
|
ipv6
|
allow to specify on which interfaces to accept Router-Advertisements; |
|
ipv6
|
do not disable/enable Router-Advertisements functionality based on IPv6/ND configuration; |
|
ipv6
|
initialize RA receiving when enabled and without any other IPv6 configuration; |
|
ipv6
|
properly remove SLAAC installed route when prefixes expire; |
|
ipv6
|
remove SLAAC installed DNS server and route on expire; |
|
isis
|
improved stability; |
|
isis
|
improved system stability when changing passive flag; |
|
isis
|
improved system stability when receiving a hello packet; |
|
l3hw
|
added per-VLAN "l3-hw-offloading" setting and "H" flag for /interface/vlan menu; |
|
l3hw
|
display warning when partial offloading is active (suggest users to use suppress-hw-offloading to control which routes get HW offloaded and which are CPU processed); |
|
l3hw
|
fixed issue with IPv4 ARP and IPv6 neighbor resolve for CRS812; |
|
l3hw
|
fixed partial offloading with /31 routes; |
|
l3hw
|
fixed per-VLAN counters when packets are going through CPU; |
|
l3hw
|
fixed VLAN and VXLAN counters for CRS520 device; |
|
l3hw
|
improved stability and performance during L3HW enable with many routes; |
|
l3hw
|
improvements and optimizations for IPv4 /32 and IPv6 /128 route offloading; |
|
l3hw
|
prioritize local IP address over ARP/neighbor entry with same IP (fixes incorrect packet flow); |
|
log
|
fixed ISO8601 time format; |
|
log
|
fixed memory leak; |
|
log
|
fixed remote logging on remote-protocol configuration change; |
|
log
|
fixed unnecessary file creation when configuring a disabled log action with "target=disk"; |
|
log
|
hide irrelevant log action parameters; |
|
log
|
limit firewall log prefix length; |
|
log
|
limit log socket buffer memory size; |
|
lte
|
added "force-delete" command to allow deletion of active eSIM profiles; |
|
lte
|
added additional logging for error reported by modem during APN profile setup; |
|
lte
|
added command to send out EUICC generated notifications manually; |
|
lte
|
added confirmation prompt when deleting eSIM profile; |
|
lte
|
added support for additional D-Link DWM-222 variation (vendor-id="0x2001" device-id="0x7e46"); |
|
lte
|
added support for additional Huawei E3372-325 variation (vendor-id="0x3566" device-id="0x2001"); |
|
lte
|
added support for R11e-LTE6 v039 firmware release and availability notification; |
|
lte
|
ask for user confirmation before installing eSIM profile; |
|
lte
|
clear SIM not present error when performing modem FW upgrade; |
|
lte
|
discontinued support for RBSXTLTE3-7, further versions will use v7.20 LTE firmware package; |
|
lte
|
do not retry activation for IPv4 and IPv6 APNs on QMI modems if only one address family is assigned; |
|
lte
|
fixed cases where LTE monitor could show abnormalities; |
|
lte
|
fixed LTE interface IPv6 address generation to use EUI-64 (introduced in v7.20); |
|
lte
|
fixed MTU inheritance from master interface in multi-APN setups; |
|
lte
|
fixed MTU setting for AT modems; |
|
lte
|
fixed no re-connection after cellular network requested APN deactivation on Chateau 5G ax R17; |
|
lte
|
force sms-protocol to AT for FG621-EA modem; |
|
lte
|
improved AT modems at-chat control channel handling after modem has closed AT channel unexpectedly; |
|
lte
|
improved modem recovery for Chateau 5G and Chateau 5G R16; |
|
lte
|
improved stability for FG621-EA modem; |
|
lte
|
improved system stability when receiving SMS messages; |
|
lte
|
provide firmware download URL when no LTE package installed on "SXT LTE3-7"; |
|
lte
|
relay EUICC generated notifications after profile enable/disable/remove/provision; |
|
lte
|
rework multiapn support for AT modems; |
|
lte
|
unify "SIM not present" status for all modems; |
|
macsec
|
added initial support for hardware-offloaded support (available only on QCA8081 PHY: RB5009, hAP ax3, Chateau ax ether1 port); |
|
media
|
fixed console autocomplete for path parameter; |
|
mpls
|
fixed LDP filter upgrade from v6 where neighbor parameter is not specified; |
|
mpls
|
fixed update of LDP Address message when local addresses change; |
|
mpls
|
properly renew services when LDP transport address changes its state; |
|
netinstall
|
fixed install with old RouterBOOT; |
|
ospf
|
changed nssa-translator default value from no to candidate; |
|
ospf
|
fixed OSPF interface "Standby" state detection; |
|
ospf
|
improved stability; |
|
ospf
|
show interface as separate prop for interface and neighbor; |
|
ovpn
|
fixed OVPN server handling on reboot (introduced in v7.20); |
|
ovpn
|
improved system stability when using cipher=blowfish128; |
|
ovpn-server
|
added support for pushing IPv6 routes; |
|
poe-out
|
added input name hint to poe max-power settings; |
|
poe-out
|
added LED blink on error for RB5009; |
|
poe-out
|
firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces); |
|
poe-out
|
fixed CRS354 misreporting approved LLDP power; |
|
poe-out
|
improved firmware update stability; |
|
poe-out
|
improved power-on mechanism for 802.3at capable boards; |
|
port
|
added comment for /port/remote-access (CLI only); |
|
port
|
added support for additional baudrates for USB to serial adapters; |
|
port
|
do not show serial port for ATL 5G R16; |
|
port
|
fixed displaying "baud-rate=auto" on x86; |
|
port
|
fixed export for default serial port name; |
|
port
|
give "gps" prefix for R11e-LR8G and R11e-LR9G GPS ports; |
|
ppp
|
added multi-APN support to ppp-client dialer; |
|
ppp
|
added setting to set BG77 modem cellular connection mode (auto; lte-m; nb-iot) (CLI only); |
|
ppp
|
improved service stability when using IPv6 with DHCP and RADIUS accounting; |
|
qos-hw
|
added "default" flags to default entries; |
|
qos-hw
|
added "mirror-profile" which allows to select profile (traffic-class) for mirrored traffic; |
|
qos-hw
|
always show usage and PFC counters, even when they are zero; |
|
qos-hw
|
fixed counters for ports that are configured with "offline" tx-manager; |
|
qos-hw
|
fixed profile add/remove for CRS812; |
|
qos-hw
|
fixed shared-pools for CRS812; |
|
qos-hw
|
remove unnecessary "offline" tx-manager for CRS812 (not supported by hardware); |
|
queue
|
improved system stability when using SFQ kind of queues; |
|
route
|
added options in /routing/settings to adjust check-gateway=ping timers; |
|
route
|
fixed SNMP output for ECMP routes having interface gateways; |
|
route
|
hide suppress-hw-offload setting from devices that do not support it; |
|
route
|
improved stability; |
|
route
|
improved system stability with multicast routing; |
|
route
|
make check-gateway=ping work on p2p interface gateways; |
|
route
|
removed /routing stats mem-blocks; |
|
routerboot
|
fixed boot MAC for CRS305-1G-4S+ and CRS328-4C-20S-4S+ switches ("/system routerboard upgrade" required); |
|
sfp
|
expose sfp-cmis-module-state to monitor; |
|
sfp
|
filter out non-breakout modes for breakout modules; |
|
sfp
|
fixed "sfp-tx-fault" state indication for CRS520-4XS-16XQ; |
|
sfp
|
fixed combo-mode change for CRS326-4C+20G+2Q+; |
|
sfp
|
fixed missing link up/down notifies; |
|
sfp
|
improved initialization and linking for 25G DAC on CRS812; |
|
sfp
|
improved system stability with some GPON modules for CRS418, CCR2004 and CCR2116 devices; |
|
sfp
|
recognize 40G Active Cable (XLPPI); |
|
sfp
|
remove 40G-baseCR4, 40G-baseSR4-LR4 from sfp-supported list for qsfp28-x-3 interfaces; |
|
snmp
|
added lldpLocChassisId OID; |
|
snmp
|
count only "bound" leases for mtxrDHCPLeaseCount OID; |
|
snmp
|
make lldpLocPortId and lldpLocPortDesc OIDs information consistent with LLDP TLVs; |
|
socksify
|
improved system stability when using Socksify service; |
|
ssh
|
added support for ED25519-SK keys; |
|
ssh
|
improved logging of failed login attempts; |
|
ssh
|
refactored SSH service internal processes; |
|
ssh
|
renamed User SSH keys "key-owner" field to "info"; |
|
ssh
|
replaced "always-allow-password-login" with "password-authentication" in SSH settings; |
|
supout
|
added info log entry when autosupout.rif is generated; |
|
switch
|
added dynamic "copy-to-cpu" ACL rule for loop-protect; |
|
switch
|
automatically add local bridge MAC to switch FDB; |
|
switch
|
fixed non-IP multicast packet receive on 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98CX8410 switches; |
|
switch
|
improved HW bond load balancing by adding MPLS labels to transmit hash for 98DXxxxx, 98CXxxxx switches; |
|
switch
|
improved stability on MediaTek switch chips; |
|
swos
|
fixed "allow-from" setting for MIPSBE devices; |
|
system
|
added disks to /system/resource/hardware list; |
|
system
|
detect policy mismatch sooner if script is executed internally by some other service; |
|
system
|
fixed local update package filename generation; |
|
system
|
fixed network header offset for interfaces with MAC (fixes VRRP Tx on IGMP snooping bridge); |
|
system
|
fixed potential configuration loss when available disk space was insufficient; |
|
system
|
fixed saving panic logs to autosupout.rif for ARM CRS3xx devices; |
|
system
|
improved stability when terminating HTTP protocol connection; |
|
system
|
improved system stability when processing different kinds of lists; |
|
system
|
improved system stability when processing GRE packets on TILE devices; |
|
system
|
improved system stability; |
|
system
|
limit number of interface-lists to 244; |
|
tr069-client
|
added LTE link recovery timer setting; |
|
tr069-client
|
allow disabling Device.WiFi.AccessPoint; |
|
tr069-client
|
expose 5G NR signal metrics for the Chateau R17 ax; |
|
traffic-generator
|
added support for injecting pcapng files; |
|
undo
|
do not show internally issued commands in /system/history; |
|
undo
|
show console commands in WinBox/WebFig for /system/history entries; |
|
ups
|
fixed board hibernation shutdown; |
|
usb
|
fixed cases where USB bus order could change on D53 devices; |
|
usb
|
LTE modem and USB-Serial Controller enumeration fix; |
|
usb
|
support video capture devices for arm64 and x86, for passthrough to containers; |
|
user-manager
|
added RadSec support; |
|
veth
|
add container-mac-address setting; |
|
veth
|
added default print brief table mode; |
|
veth
|
added dhcp setting that allows to auto-configure IPv4 address, works when VETH is bridged with other interfaces and there is a DHCP server running somewhere on that network; |
|
veth
|
complain immediately when VETH gateway not reachable, more detailed error message when network setup fails; |
|
veth
|
fixed IP address not appearing in the app menu when VETH uses DHCP; |
|
veth
|
fixed VETH interface not getting an IP address in a vlan-aware bridge containing multiple DHCP servers; |
|
veth
|
show only when container package installed; |
|
vrf
|
added read-only property to IPv4/IPv6 addresses, ARP and IPv6 neighbor; |
|
vrf
|
allow setting comment on default "lo" interface; |
|
vrrp
|
do not show "ttl not 255" warning when received VRRP VRID does not match with configured VRID; |
|
vrrp
|
fixed gratuitous ARP being sent after VRRP is disabled (fixes packet forwarding on HW offloaded bridge after VRRP is disabled); |
|
w60g
|
fixed possible memory leak when an interface is disabled; |
|
webfig
|
added a hint for Undo/Redo buttons; |
|
webfig
|
added Apps menu to login; |
|
webfig
|
added capability to check/uncheck entry tree in skin designer; |
|
webfig
|
added Copy capability; |
|
webfig
|
added missing PPP types to Skin Designer; |
|
webfig
|
added TCP State column for connection tracking table; |
|
webfig
|
check if device is still reachable before disconnect on error; |
|
webfig
|
fixed container config memory high input; |
|
webfig
|
fixed issue where routes and PIM table did not load; |
|
webfig
|
fixed issue where Torch stops running; |
|
webfig
|
fixed name and title store in skins; |
|
webfig
|
fixed new item window name when using skins; |
|
webfig
|
improved mikrotik_logo.svg; |
|
webfig
|
improved service stability after deleting a skin; |
|
webfig
|
increase graph width for better scaling; |
|
webfig
|
increase maximum number size in forms; |
|
webfig
|
make close button as a button instead of link; |
|
webfig
|
make combobox accessible to screen readers; |
|
webfig
|
remember last user in login page; |
|
webfig
|
turn off auto-capitalize and auto-correct for on-screen keyboards; |
|
wifi
|
added "CAP" information field on interfaces view; |
|
wifi
|
added CAPsMAN forwarding support (datapath.traffic-processing=on-capsman); |
|
wifi
|
added configuration parameters relevant to the upcoming WiFi 7 products; |
|
wifi
|
enable configuration of "3gpp-info-raw" and "realms-raw" interworking parameters; |
|
wifi
|
fixed issue when trying to use interface as bonding slave; |
|
wifi
|
fixed multi-passphrase usage in combination with access-list; |
|
wifi
|
fixed possible duplicate values for WPA3 authentication types in scan results; |
|
wifi
|
fixed possible memory leak when failing to start AP on chosen channel; |
|
wifi
|
fixed some CAPsMAN settings to be optional; |
|
wifi
|
improved formatting of FT request action frames; |
|
wifi
|
improved interface stability when encountering authentication failures; |
|
wifi
|
improved stability when capturing data at high rates with wifi sniffer; |
|
wifi
|
increased accounting interval, maximum client entry count for 2.4GHz probe response delay feature; |
|
wifi
|
rename ft-wpa2-eap authentication type to "ft-eap"; |
|
wifi
|
split access-list time property in days and time; |
|
wifi,wireless
|
include "Event-Timestamp" in RADIUS accounting messages; |
|
wifi-mediatek
|
added Superchannel regulatory profile; |
|
wifi-qcom
|
added Unsolicited BSS Transition Management Request support; |
|
wifi-qcom
|
improved default RTS/CTS policy for CPE station radios; |
|
wifi-qcom
|
multicast-enhance will no longer apply for station mode configured devices; |
|
winbox
|
added "Last Status" and "Last Address" fields in "Tools/Email" menu; |
|
winbox
|
added file selector for BTH files; |
|
winbox
|
added Forwarding Table in "MPLS" menu; |
|
winbox
|
added missing "SM-DP+ Oid" LTE eSIM provisioning field; |
|
winbox
|
added Sessions tab in "Routing/RPKI" menu; |
|
winbox
|
added support for new settings and fixed several existing ones; |
|
winbox
|
Bandwidth test, Speed test, Ping, Traceroute tools use RouterOS DNS service to resolve domain names; |
|
winbox
|
fixed "Too many entries" not showing in WinBox v4; |
|
winbox
|
fixed Disk iscsi/smb configuration; |
|
winbox
|
fixed Disk NVMe-TCP configuration; |
|
winbox
|
fixed Dude/Tools appearance after Apply action; |
|
winbox
|
fixed graphs in some forms with big numbers; |
|
winbox
|
fixed Keepalive Time format in "Routing/BGP" menus; |
|
winbox
|
fixed Preshared Key "auto" and "none" options for WireGuard Peer; |
|
winbox
|
fixed switch QoS monitor for mirror properties; |
|
winbox
|
hide certificate "Issuer" field for certificate template; |
|
winbox
|
hide IPv6 addresses for IP neighbors that no longer have them; |
|
winbox
|
make multiple address fields required; |
|
winbox
|
make separate inputs for WiFi Interworking "Authentication Types" and "Connection Capabilities" fields; |
|
winbox
|
make VETH gateway fields not required; |
|
winbox
|
move VRF from Ethernet to generic Interface table; |
|
winbox
|
removed "Add" for dynamic DNS servers; |
|
winbox
|
reorder BGP and OSPF tabs in logical order; |
|
winbox
|
restore route max object 10000 limit; |
|
winbox
|
show "Trusted" field for certificate template; |
|
winbox
|
show warnings in "Routing/BGP" menus; |
|
winbox
|
show warnings in Disk menu; |
|
winbox
|
updated and shortened window titles (e.g. Address List -> Addresses); |
|
wireguard
|
added VRF option (CLI only); |
|
wireguard
|
allow to add AllowedIPs configuration for client configuration template; |
|
wireless
|
added last-ip parameter for the CAPSMAN registration-table tab; |
|
wireless
|
improved system stability when stopping scan process; |
|
www
|
added option to disable individual web services in /ip/service/webserver and IP>Services>Web Server; |
|
www
|
handle escaped characters in resource IDs and names for REST API requests; |
|
www
|
process REST API requests only after user authentication is completed; |
|
www
|
removed ability to publish directories via "/files" www service; |