Component: ospf
100 changelog entries across 37 version(s)
Activity over time (changelog entries per month)
- changed nssa-translator default value from no to candidate;
- fixed OSPF interface "Standby" state detection;
- improved stability;
- show interface as separate prop for interface and neighbor;
- fixed wrong LS Ack warning;
- fixed "mismatch" typo in logs;
- make auth-key parameter sensitive;
- fixed DN bit not being set;
- fixed memory corruption;
- improved stability on configuration update;
- improved system stability during LSA monitoring;
- fixed LSA Type3 advertisement for OSPFv2;
- fixed missing OSPF interface on L2TP interface reconnect;
- fixed missing opaque bit in opaque LSA;
- fixed LSA Type3 advertisement for OSPFv2;
- fixed adding ECMP routes;
- fixed BFD on virtual-link with configured VRF;
- fixed OSPFv3 authentication header length calculation;
- fixed OSPFv3 not working with NSSA areas;
- fixed parsing of opaque LSAs used by TE;
- fixed translated NSSA routes not showing in backbone;
- fixed processing of fragmented LSAs;
- fixed "ospf-type" parameter for OSPFv3 routes;
- fixed simple auth for OSPFv3;
- fixed MD5 checksum calculation;
- fixed simple authentication and checksums for NBMA and PTMP links;
- fixed simple authentication checksum calculation;
- fixed virtual-link address selection for PTP links;
- added SHA hashing for authentication;
- fixed area "no-summary" setting;
- fixed checksum calculation;
- fixed displaying of VRF interface in related logs;
- fixed transmit of LSA/ACK's on p2p interfaces;
- improved logging when invalid configuration is detected;
- refresh OSPFv3 interface configuration when IPv6 network becomes available;
- fixed handling of external forwarding address;
- improved stability when interface is being disabled during database exchange;
- fixed GRE interface compatibility with OSPF;
- ignore instance route when originate-default=if-installed is enabled;
- improved stability when enabling or removing interface-template entries;
- fixed GRE interface compatibility with OSPF;
- improved stability when enabling or removing interface-template entries;
- added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
- convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
- fixed MD5 authentication;
- fixed NBMA hello's not being sent if priority is set to 0;
- fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
- fixed default type-3 LSA's not being injected to stub area;
- fixed distance if "originate-default" is set to "always";
- fixed external LSA not updating after prefix netmask change;
- fixed incorrect LSA types when changing area types;
- fixed neighbor election failure;
- fixed neighbor stuck in ExStart;
- fixed simple authentication;
- general stability improvements;
- improved DB retransmit logging;
- improved logging;
- improved overall stability;
- improved stability for very large LSDB;
- improved stability on OSPFv3 instance disabling;
- improved stability when DR goes down;
- improves stability when handling looped back OSPF packets;
- properly set VRF for gateway;
- send notifies for neighbors;
- fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
- fixed incorrect LSA types when changing area types;
- added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
- convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
- fixed external LSA not updating after prefix netmask change;
- fixed distance if "originate-default" is set to "always";
- fixed neighbor stuck in ExStart;
- fixed simple authentication;
- improved overall stability;
- improves stability when handling looped back OSPF packets;
- fixed type-7 LSA translation to type-5;
- optimized LSA printing for smaller message sizes;
- optimized LSA printing for smaller message sizes;
- fixed disappearing NSSA default route;
- fixed processing of "unknown" LSA type;
- improved route tag processing for OSPFv3;
- fixed disappearing NSSA default route;
- fixed processing of "unknown" LSA type;
- fixed case when changing one distribution metric changed metrics for other distribution options;
- improved route tag processing for OSPFv3;
- fixed opaque LSA type checking in OSPFv2;
- fixed possible busy loop condition when accessing OSPF LSAs;
- improved "unknown" LSA handling in OSPFv3;
- fixed possible busy loop condition when accessing OSPF LSAs;
- added support for link scope opaque LSAs (Type 9) for OSPFv2;
- fixed opaque LSA type checking in OSPFv2;
- improved "unknown" LSA handling in OSPFv3;
- improved stability while handling type-5 LSAs;
- improved stability while handling type-5 LSAs;
- improved link-local LSA flooding;
- improved stability when originating LSAs with OSPFv3;
- improved link-local LSA flooding;
- improved stability when originating LSAs with OSPFv3;
- fixed OSPF v2 and v3 neighbor election;
- fixed route crash caused by memory corruption when there are multiple active interfaces;
- fixed crash when getting neighbor router-id in NBMA area;