|
arm64/x86/chr
|
added Aquantia network driver; |
|
bgp
|
added brief, unnumbered output for advertisements list; |
|
bgp
|
added initial EVPN support; |
|
bgp
|
added NLRI filter for more precise accept/discard of ipv4/6 prefixes; |
|
bgp
|
automatically create output.network blackhole routes; |
|
bgp
|
decode and log notifications; |
|
bgp
|
fixed nexthop force-self for IPv4 and IPv6; |
|
bgp
|
fixed selection of received BGP VPN routes; |
|
bgp
|
improved configuration upgrade from versions prior to 7.20; |
|
bgp
|
improved logging; |
|
bgp
|
introduced BGP instance configuration (note, downgrading to earlier versions without instance support may cause config issues); |
|
bgp
|
make "as" parameter optional in template configuration; |
|
bgp
|
print aigp attribute in advertisements; |
|
bgp
|
refresh WinBox when BGP session is created/deleted; |
|
bgp
|
resend routes after nexthop-choice update; |
|
bgp
|
support for Advertising IPv4 Network Layer Reachability Information (NLRI) with an IPv6 Next Hop; |
|
bridge
|
added dynamic tagged entry named "switch-cpu" in scenarios where the same VLAN spans multiple switch chips or is used on both HW and SW ports; |
|
bridge
|
added verbose STP debug logging (rx/tx BPDU, edge-port and port-role transitions, FDB flush); |
|
bridge
|
added warning log when all MACs cannot be displayed under the host table; |
|
bridge
|
disable/enable HW offload on bonding slave disable/enable (fixes potential MAC learning issue); |
|
bridge
|
fixed MVRP leave indication; |
|
bridge
|
fixed port-id when adding a new port in non-primary MLAG; |
|
bridge
|
improved stability when disabling bridge with dynamic VLANs in MSTI; |
|
bridge
|
refactored host learning logic in MLAG setups in order to make it more robust and predictable; |
|
bth
|
added extra file-share functionality for use with apps; |
|
bth
|
improved tunnel name in client config export; |
|
bth,file
|
added direct file sharing from the WinBox Files menu; |
|
certificate
|
added "Amazon Root CA 1" to built-in root certificate authorities store; |
|
certificate
|
fixed ACME certificate usage after renewal; |
|
certificate
|
improved stability after failed import; |
|
certificate
|
trust built-in root certificate authority store after configuration reset; |
|
chr
|
added Chelsio VF driver for PCIID 5803; |
|
chr
|
improved virtio_net performance; |
|
cloud
|
fixed restoring "BTH Files" service after a prolonged network outage; |
|
cloud
|
reduced "BTH Files" ping interval dynamically upon failure; |
|
console
|
added use-tz option to :timestamp command; |
|
console
|
fixed :convert to=num on MIPSBE; |
|
console
|
fixed incorrect multibyte to=num conversions; |
|
console
|
fixed issue where file completion sometimes shows duplicates; |
|
console
|
improved stability and visuals for /interface/wireless/snooper/snoop; |
|
console
|
improved visuals for brief print when displaying large tables; |
|
console
|
improved visuals for hexadecimal strings; |
|
console
|
improved visuals for hiding sensitive commands; |
|
console
|
include flags by default when printing to value; |
|
console
|
prioritize directory specific parameters and hide rarely used ones in print autocomplete; |
|
console
|
replace TAB characters with spaces when editing scripts and added tab-width user configuration in /console/settings; |
|
console
|
unified string representation of ID values; |
|
console
|
updated hints for some /file/print parameters; |
|
console
|
use file name completions (and basic validation) for file output related parameters for export and print commands; |
|
console
|
validate filenames upon addition (if enabled in /console/settings); |
|
container
|
added "device" option to pass a device from /system/hardware menu to a container; |
|
container
|
added /container/log menu, keep 100 messages per container; |
|
container
|
added default print brief mode; |
|
container
|
added initial support for container in container setups; |
|
container
|
added option to execute commands inside a container using "/container/shell cmd= user="; |
|
container
|
added per-container memory limiting and monitoring; |
|
container
|
added repull command; |
|
container
|
added SCTP support; |
|
container
|
added support for cpuset, cpu, memory, pids cgroups; |
|
container
|
allow picking passthrough devices by descriptive name; |
|
container
|
allow read-only mounts; |
|
container
|
allow to mount individual files, not just directories; |
|
container
|
allow to specify multiple envlists; |
|
container
|
allow to use multiple veths in a container, change the in container interface name to same as in RouterOS; |
|
container
|
can use KVM (x86 and arm64) in container QEMU for faster virtualization; |
|
container
|
display any error prominently in WinBox; |
|
container
|
do not allow multiple containers with same root directory; |
|
container
|
enable check-certificate by default for new remote imports; |
|
container
|
fixed containers that use inotify interface; |
|
container
|
fixed environment variables not being passed to "/container/shell" properly; |
|
container
|
fixed QEMU VM to host bridge; |
|
container
|
fixed shell exit causing freeze; |
|
container
|
improved compatibility when running containers with custom "cmd" and "entrypoint" commands; |
|
container
|
improved error and log messages; |
|
container
|
prevent user from setting "root-dir=/" for a container; |
|
container
|
show a more descriptive error when tar extraction fails, particularly "No space left on device"; |
|
container
|
show config.json to user; |
|
container
|
show explicit stopped flag for container; |
|
container
|
stability improvements; |
|
container
|
support for direct access to hardware devices; |
|
container
|
terminate containers on shutdown, allow them to clean up properly; |
|
dhcp
|
show error only after interface status is synced with the system (instead of erroneously displaying it immediately); |
|
dhcp-client
|
show warning if DHCP client is configured on dot1x server port; |
|
dhcp-server
|
do not show "I" flag when server is disabled; |
|
dhcp-server
|
improved logging when dual-stack is enabled but fails to acquire client MAC from DUID; |
|
dhcpv4-client
|
allow specifying DSCP of outgoing packets; |
|
dhcpv4-client
|
allow specifying vlan-priority of outgoing packets (for VLAN interfaces only); |
|
dhcpv4-client
|
show "custom-hostname-suffix" and "custom-source-mac-address" properties if set; |
|
dhcpv4-server
|
added "add dns" step to setup wizard; |
|
dhcpv4-server
|
added "lease-agent-circuit-id" and "lease-agent-remote-id" variables to the lease script; |
|
dhcpv4-server
|
added "ntp-none" parameter; |
|
dhcpv4-server
|
changed the default value of address-pool to "static-only" in the option matcher, removed "none" option; |
|
dhcpv4/v6-client
|
properly resume client service after underlying interface status changes; |
|
dhcpv4/v6-server
|
added CoA support; |
|
dhcpv6-client
|
added "accept-prefix-without-address" allowing client to accept prefix when address is not available although requested; |
|
dhcpv6-client
|
update the routing table and address list on manual client configuration changes; |
|
dhcpv6-server
|
added "ignore-ia-na-bindings" setting that allows server to ignore address requests and work just with prefixes; |
|
dhcpv6-server
|
do not trim real client DUID when assigning it to the binding; |
|
discovery
|
disable discovery on loopback, LTE, ppp-out interfaces; |
|
discovery
|
improved LLDP Power via MDI TLV with 802.3bt specific field support; |
|
discovery
|
output LLDP fault message once per port poe-out status change; |
|
discovery
|
report router as "CAPsMAN" on MNDP under "running" parameter; |
|
discovery
|
set initial poe-out Tx power above 0dW; |
|
disk
|
allow to format multiple disks at once; |
|
disk
|
allow to remove Btrfs device by ID; |
|
disk
|
better manage disks disappearing from RAID; |
|
disk
|
cleanup mountpoint when setting mount-filesystem=no; |
|
disk
|
disallow adding SMB share or user with empty name; |
|
disk
|
do Btrfs remove-device asynchronously; |
|
disk
|
offer to blink only PCI slots in console; |
|
disk
|
rename raid-role=unspecified to spare; |
|
disk
|
reset RAID role of old disk after spare assumes a new role; |
|
disk
|
show error when file based block-device uses a mountpoint to be unmounted; |
|
disk
|
show total/free inode counts for fs's that support it; |
|
dlna
|
recognize flac extension; |
|
dns
|
fixed memory leak when static CNAME record was matched; |
|
fetch
|
display file sizes between 1-1023 bytes as 1KiB (instead of 0KiB); |
|
fetch
|
include RouterOS version in the "User-Agent" field; |
|
file
|
improved file handling performance in WinBox v4; |
|
filesystem
|
improved calculation of free space on NAND flash (fixes potential "disk is too small" issue); |
|
firewall
|
added "liberal-tcp-tracking" connection tracking setting; |
|
firewall
|
added connection tracking "total-ip4-entries" and "total-ip6-entries" counters; |
|
firewall
|
allow "dst-limit" matcher to work properly above value 10000; |
|
firewall
|
fixed IPv6 firewall interface matchers not matching VRF interfaces; |
|
firewall
|
improved IPv6 connection tracking lookup responsiveness; |
|
firewall
|
improved system stability when processing connections on multicore systems; |
|
firewall
|
reorganized firewall connection tracking table values and make them persistent between IPv4 and IPv6; |
|
flashfig
|
bind to local address (fixes issue when multiple interfaces are enabled); |
|
iot
|
added additional dongle firmwares to iot-bt-extra package; |
|
iot
|
added an option to increase the amount of LoRa's traffic entries displayed; |
|
iot
|
added support for MQTT last will message; |
|
iot
|
adjusted default LoRa antenna gain values for specific devices; |
|
iot
|
fixed an issue where channel #7 is ignored during LoRa LNS connection; |
|
iot
|
fixed logic for unknown NetIDs; |
|
iot
|
fixed support for LoRa Alliance NetID list; |
|
iot
|
improved LoRa stability and error recovery; |
|
iot
|
improvement to LoRa band verification logic; |
|
iot
|
iot-bt-extra package stability improvement and additional dongle support; |
|
iot
|
LoRa netid filters now can be configured as a "range"; |
|
iot
|
LoRa server list is no longer generated if the LR card is not physically attached; |
|
iot
|
LR8G/9G firmware update; |
|
iot
|
removed lora-package, LoRa functionality was moved into iot-package; |
|
iot
|
removed non-existent GPIO pin functionality; |
|
ip
|
added socksify feature and new NAT action "socksify"; |
|
ip-service
|
show service name "nfs" for port 2049; |
|
ipsec
|
fixed degraded IPsec performance for IPQ-6010 (introduced in v7.17); |
|
ipsec
|
move raw RSA keys to /ip/ipsec/key/rsa; |
|
ipv6
|
added support for IPv6 ND proxying of individual addresses; |
|
ipv6
|
do not allow removal of dynamic address on lo interface; |
|
ipv6
|
fixed "auto-link-local" feature on WireGuard interface; |
|
ipv6
|
make pref-src work and settable for static routes; |
|
isis
|
added passive parameter for interface templates; |
|
log
|
added command to clear memory action entries; |
|
log
|
improved the "transmit loop detected" warning log; |
|
lte
|
added "done" status for modem firmware-upgrade version check; |
|
lte
|
added "remove-sent-sms-after-send" option to automatically delete sent SMS messages; |
|
lte
|
added log entry if eSIM has no profiles on read; |
|
lte
|
added modem-init string response to system log; |
|
lte
|
added passthrough support for RG650E-EU modem; |
|
lte
|
added show-capabilities eSIM presence detection for MBIM modems; |
|
lte
|
allow only one IPv6 APN for AT modems; |
|
lte
|
display ICCID regardless of SIM PIN entry status; |
|
lte
|
do not reconfigure modem if deactive eSIM profile is deleted; |
|
lte
|
exempt eSIM provision from global CRL certificate settings; |
|
lte
|
exit LTE scan if modem reconfigured; |
|
lte
|
fallback to RA for global IPv6 if unattained via AT channel (resets on config change); |
|
lte
|
fixed inappropriate LTE interface inactive flag shown during modem initialization; |
|
lte
|
fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16; |
|
lte
|
fixed progress message for R11e-LTE modem firmware-upgrade; |
|
lte
|
fixed rare case where AT dialer could stop; |
|
lte
|
improved EC200A-EU firmware-upgrade stability; |
|
lte
|
improved SMS sending stability over MBIM protocol; |
|
lte
|
refresh eSIM profile list after successful provision; |
|
lte
|
renamed "uicc" to "iccid" in LTE monitor and eSIM profile print; |
|
lte
|
show ip-type in /interface/lte/apn/print; |
|
lte
|
use modem-supplied IPv6 address over EUI-64 when available; |
|
macvlan
|
allow creating macvlan interfaces on all interfaces with a MAC address; |
|
mpls
|
fixed minimal dynamic-label-range setting; |
|
net
|
fixed possible slave flag issues after user configuration changes; |
|
net
|
improved system stability when processing TCP/UDP connections; |
|
net
|
prevent removal of lo interface via WinBox; |
|
netinstall
|
added after-install controls (reboot after installation, shutdown after installation, none); |
|
netinstall
|
alert on unreadable configuration scripts; |
|
netinstall
|
detect inactive install interface; |
|
netinstall
|
fixed install for PPC devices; |
|
netinstall
|
fixed mutually exclusive checkbox behavior; |
|
netinstall
|
show router and package architecture; |
|
netinstall
|
warn user if not enough space on device; |
|
netinstall-cli
|
added MAC filter option "--mac"; |
|
netinstall-cli
|
added multiple install option "-m"; |
|
netinstall-cli
|
improved client device architecture detection; |
|
netwatch
|
added "early-success-detection" and "early-failure-detection" properties for ICMP probe; |
|
netwatch
|
fixed date and time for stats; |
|
ovpn
|
added support for sha384 hmac; |
|
ovpn
|
improved tunnel setup speeds in configurations with large ammount of active OVPN clients; |
|
partitions
|
fixed failure to repartition correctly from 32MB partition size; |
|
partitions
|
hide partition menu on unsupported boards (without NAND); |
|
partitions
|
limit minimal partition size to 60MB; |
|
poe-out
|
added support for line-interactive and offline UPS on CRS320; |
|
poe-out
|
firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces); |
|
poe-out
|
firmware update for 802.3bt capable boards (the update will cause brief power interruption to poe-out interfaces); |
|
poe-out
|
improved dual-signature detection on CRS320; |
|
poe-out
|
improved short-circuit detection and reporting on CRS320; |
|
poe-out
|
increased maximum power margin for all classes on CRS320; |
|
port
|
added IPv6 support for "remote-access" tool; |
|
port
|
improved port status handling at unexpected device removal; |
|
ppp
|
added "dhcpv6-use-radius" PPP profile feature that enables "use-radius" option on dynamically created DHCPv6 servers; |
|
ppp
|
added "remote-ipv6-prefix-reuse" PPP profile feature that allows to advertise same prefix on multiple VPN clients at the same time; |
|
ppp
|
added DHCPv6 assigned prefix to address list when configured and received from RADIUS; |
|
ppp
|
added dhcpv6-lease-time profile configuration property; |
|
ppp
|
do not send initial echo request if keepalive-timeout=disabled; |
|
ppp
|
improved system stability when closing connections; |
|
pppoe-server
|
added accept-untagged=yes/no option to accept untagged traffic in combination with pppoe-over-vlan-rage property; |
|
ptp
|
added PTP support for RDS2216 device; |
|
ptp
|
removed delays between timestamping and packet transmission, improving PTP precision; |
|
qos-hw
|
added mirror-buffers property and monitoring values; |
|
radius
|
fixed issue with Session-Timeout attribute functionality; |
|
romon
|
changed default "disabled=yes" to "disabled=no" under /tool/romon/port; |
|
romon
|
improved error message; |
|
route
|
added missing and remove unnecessary parameters from /ipv6/route menu; |
|
route
|
afi naming consistency in logs; |
|
route
|
attempt to clean up stuck routes in the routing table; |
|
route
|
do not allow to modify dynamic routes; |
|
route
|
fixed incorrectly set nexthop interfaces for BGP VPN routes; |
|
route
|
fixed issue when route table is installed to kernel without fib setting; |
|
route
|
fixed skipping updated destinations; |
|
route
|
improved stability; |
|
route
|
removed fib-reinstall; |
|
route
|
update router ID when disabled address is removed; |
|
routerboot
|
fixed boot MAC for CRS212 switch ("/system routerboard upgrade" required); |
|
routing-filter
|
added filter-wizard (filter generator with v6-like syntax); |
|
routing-filter
|
added sync command; |
|
routing-filter
|
make "chain" and "list" parameters required when adding new item; |
|
sfp
|
fixed low power mode pins on CRS326-4C+20G+2Q+ for optical QSFP modules; |
|
sfp
|
fixed qsfp28 breakout disable; |
|
sfp
|
improved initialization and linking for sfp28 on CRS518; |
|
sfp
|
improved SFP handling for CRS418 device; |
|
sfp
|
improved system stability with some GPON modules for CCR2004 and CCR2116 devices; |
|
smips
|
reduced package size, removed hotspot feature and provide it as a separate package; |
|
sniffer
|
added CPU number and fast-path status in per-packet comment; |
|
sniffer
|
save packets in pcapng format, it now includes interface name the packet was sniffed on, packet direction and nanosecond timestamp resolution; |
|
snmp
|
added SNMP OIDs for firewall connection tracking "total-entries", "total-ip4-entries" and "total-ip6-entries"; |
|
snmp
|
improved service stability when processing v3 requests; |
|
snmp
|
set maximum message size to 4 KB; |
|
ssh
|
improved stability on busy server; |
|
ssh
|
show user public key fingerprint under /user/ssh-keys; |
|
ssh/sftp
|
fixed session disconnects during file transfer; |
|
ssl/tls
|
fixed SSL looping behavior when multiple different TLS connections were used; |
|
supout
|
added certificate settings section; |
|
supout
|
added IP Service section; |
|
supout
|
added MPLS settings section; |
|
supout
|
added VXLAN VTEP section; |
|
switch
|
fixed bonding MAC flush in certain cases for 98DX224S, 98DX226S, 98DX2528, and 98DX3236 switch chips; |
|
switch
|
fixed egress-rate on QSFP ports; |
|
switch
|
fixed port blocking by MSTP for 88E6393X, 88E6191X and 88E6190 switches; |
|
switch
|
hide cpu-flow-control on irrelevant devices; |
|
switch
|
improved bond MAC flush for 88E6393X, 88E6191X and 88E6190 switches; |
|
switch
|
improved hash calculation for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98CX8410 switches (affects load balancing for bonds, ECMP routes, and VXLAN source port); |
|
switch
|
improved ingress-rate limit precision for 88E6393X, 88E6191X and 88E6190 switches; |
|
switch
|
reset all Ethernet counters on reset-counters command on QoS Port menu; |
|
switch
|
rework ethernet counters for 98DXxxxx, 98PX1012 and CRS1xx/2xx switches (add tx-drop-queueX-byte/packet, tx-drop-byte/packet, tx-queueX-byte to /in/eth and updated GUI); |
|
system
|
added support for OpenFlow 1.3 (new package "openflow" available); |
|
system
|
do not automatically retry in case /system/package/update download fails; |
|
system
|
fixed bb-upgrade failure on RB5009; |
|
system
|
fixed certain notifications (e.g. kid-control activity, connection tracking table) (introduced in v7.17); |
|
system
|
fixed stuck TCP transmit on virtual interfaces, leading to retransmits; |
|
system
|
improved system configuration journaling procedure; |
|
system
|
improved system stability for hEX refresh and hEX S (2025); |
|
system
|
improved system stability when processing large amount of traffic; |
|
system
|
merge /system/resource/usb and /system/resource/pci into /system/resource/hardware and create a device tree; |
|
usb
|
improved system stability after unplugging USB device for RB5009; |
|
user
|
added tiny delay on any user login attempt to limit login attempts; |
|
user
|
change /user/active/request-logout to /user/active/remove; |
|
veth
|
added dhcp=yes/no property to be able to easily run a container in LAN, runs a special dynamic dhcp-client on interface and sets acquired address/gateway/dns to in-container interface; |
|
veth
|
added mac-address property; |
|
veth
|
make veth interface MAC address stable in both RouterOS and container (container-side MAC incremented by +1 from RouterOS-side interface); |
|
vrrp
|
added "connection-tracking-port" and "connection-tracking-mode" settings for "sync-connection-tracking"; |
|
vrrp
|
added proxy-arp support; |
|
vrrp
|
fixed invalid TCP connection state after failover with enabled sync-connection-tracking; |
|
vrrp
|
fixed sync-connection-tracking issue when parent interface is disabled/enabled; |
|
vrrp
|
improved responsiveness when router has many IP addresses depending on VRRP state; |
|
vrrp
|
improved stability when removing VRRP interface with enabled sync-connection-tracking; |
|
vrrp
|
make MTU property read-only; |
|
vxlan
|
added checksum and learning properties; |
|
vxlan
|
fixed unset behavior for "local-address" and "bridge" properties; |
|
vxlan
|
prevent socket sharing (cannot create multiple VXLAN interfaces using the same UDP port with different checksum or vtep-vrf settings); |
|
vxlan
|
rename "vrf" setting to "vtep-vrf"; |
|
webfig
|
added token authentication (no password prompt on reload or new window, logout button will log out all related sessions, removing a user will disconnect from active sessions); |
|
webfig
|
allow network map scrolling in Dude; |
|
webfig
|
basic mobile keyboard support for terminal; |
|
webfig
|
do not show Keepalive if not set in GRE Tunnel form; |
|
webfig
|
filter out unusable Bands and Channels for wifi interfaces; |
|
webfig
|
fixed an issue where dynamic dropdown lists were hidden despite having values; |
|
webfig
|
fixed container parameters; |
|
webfig
|
fixed hiding New button with skins; |
|
webfig
|
fixed issue where legacy WebFig login page was used; |
|
webfig
|
fixed skin limits for radio buttons; |
|
webfig
|
fixed Target field duplicate when disabling simple queue; |
|
webfig
|
improved stability when displaying read-only scripts; |
|
webfig
|
make columns a bit wider in tables; |
|
webfig
|
make the Close buttons actual buttons, not links; |
|
webfig
|
mask certain fields where values match default value; |
|
webfig
|
redesign logical "not" operator selector; |
|
webfig
|
remove duplicate flag labels in QuickSet tables; |
|
webfig
|
show system note on login; |
|
webfig
|
use lexicographical sort in dropdown lists; |
|
webfig
|
use time stamps for volatile graphs (improved graph visualization); |
|
wifi
|
added tr069 support for wifi interfaces; |
|
wifi
|
avoid picking 5GHz channels by default which are unlikely to be supported by clients, can be overridden with channel.deprioritize-unii-3-4; |
|
wifi
|
fixed inability to apply steering profile to device's native wifi interfaces; |
|
wifi
|
fixed issue where station mode looped connecting to the same BSSID, preventing switching to other APs; |
|
wifi
|
increased wifi scan list; |
|
wifi
|
restart CAPsMAN only on significant configuration changes; |
|
wifi-qcom
|
accept VLAN-tagged packets from clients with vlan-id; |
|
wifi-qcom
|
added country profile "UK 5.8 fixed" and "ETSI 5.5-5.7 Outdoor"; |
|
winbox
|
added "Digest Algorithm" under "System/Certificates" menu; |
|
winbox
|
added "Note" field in LTE Firmware Upgrade; |
|
winbox
|
added "Reselect Time" for wifi; |
|
winbox
|
added Address List Extra Time under "IP/DNS" menu; |
|
winbox
|
added EAP identity under "WiFi/Registration" menu; |
|
winbox
|
added Heartbeat under "Bridge/MLAG" menu; |
|
winbox
|
added Installation under "WiFi" menu; |
|
winbox
|
added missing columns under "System/Users/SSH Keys" menu; |
|
winbox
|
added missing Comments under "User Manager" menus; |
|
winbox
|
added missing properties to "Container" menu and improved field ordering; |
|
winbox
|
added missing WPA2 PSK SHA2 option under "WiFi/Security" menu; |
|
winbox
|
added MPLS Mangle; |
|
winbox
|
added option to create new entries under "System/Users/SSH Keys" menu; |
|
winbox
|
allow to specify CAPsMAN Address as IPv6 LL; |
|
winbox
|
bump minimal WinBox version to 3.42; |
|
winbox
|
correctly unset Locked CAPsMAN field; |
|
winbox
|
differentiate PPP Profile Rx/Tx Queue settings; |
|
winbox
|
display errors from the "Files/Sync" menu; |
|
winbox
|
fixed "Rate" and "Full Duplex" monitor values after link down under "Interface/Ethernet" menu; |
|
winbox
|
fixed container RAM parameter type; |
|
winbox
|
fixed missing warning under "Routing/BGP/Instances" menu; |
|
winbox
|
fixed Record Type field under "Tools/Netwatch" menu; |
|
winbox
|
improved byte type field representation; |
|
winbox
|
improved Switch QoS layout; |
|
winbox
|
make IPv6 Immediate Gateway read-only; |
|
winbox
|
make log message field as multiline; |
|
winbox
|
move CAPsMAN settings button from Remote CAP to WiFi table; |
|
winbox
|
removed duplicate mounts option; |
|
winbox
|
rename Ping Timeout field to Interval; |
|
winbox
|
rename SMS Type field to Modem Type; |
|
winbox
|
rework LTE firmware upgrade buttons into one window; |
|
winbox
|
show "Switch" related menus only on boards that support such features; |
|
winbox
|
show all columns under "System/Users/SSH Keys" menu by default; |
|
winbox
|
use same WireGuard default values as in console; |
|
wireguard
|
fixed minor memory leak when IPv6 is disabled; |
|
wireguard
|
improved system stability on busy devices; |
|
wireless
|
changed CLI snooper column name "freq" to "channel"; |