|
bgp
|
added "name" parameter for connections; |
|
bgp
|
added initial support for prefix limit; |
|
bgp
|
fixed "keepalive-timeout" value when upgrading from RouterOS v6; |
|
bgp
|
fixed "l2vpn" distribution; |
|
bgp
|
improved stability when editing BGP template; |
|
bgp
|
moved "interface bgp-vpls" menu to "routing bgp vpls"; |
|
bgp
|
remove unused commands and parameters; |
|
bluetooth
|
improved long-term service stability; |
|
bonding
|
added "lacp-user-key" setting; |
|
bonding
|
fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices; |
|
bridge
|
added more details for loop detection warning; |
|
bridge
|
do not set VLAN on inactive port with a "set" command; |
|
bridge
|
fixed TCP, UDP port parsing for loop detect warning; |
|
bridge
|
fixed packet marking for IP/IPv6 firewall; |
|
bridge
|
ignore VLAN tagged BPDU; |
|
capsman
|
fixed bridge disabling when using L2 connection; |
|
capsman
|
fixed loss of manager configuration when "package-path" is set to external disk; |
|
capsman
|
improved traffic processing over CAP communication tunnels: |
|
ccr
|
added "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; |
|
ccr
|
added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; |
|
ccr
|
improved interface link stability on CCR2004-16G-2S+PC; |
|
ccr
|
usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe; |
|
cd-install
|
allow selecting on which drive to install RouterOS; |
|
chr
|
fixed Cloud DDNS update after license renewal; |
|
conntrack
|
limited full Connection Tracking warning to 1 message per minute; |
|
console
|
fixed "terminal inkey" command; |
|
crs1xx/2xx
|
improved system stability during switch reset; |
|
defconf
|
do not add passthrough ports to local bridge on CCR2004-1G-2XS-PCIe; |
|
dhcpv4-server
|
added "age" parameter for dynamic leases; |
|
dhcpv4-server
|
fixed conflicting or declined lease detection when IP pool differs from server's configuration; |
|
dhcpv4-server
|
fixed minor logging typo; |
|
dot1x
|
fixed RADIUS State attribute when client is reauthenticated; |
|
dot1x
|
fixed port based VLAN ID assignment on devices without a switch chip; |
|
dot1x
|
improved server stability when using re-authentication; |
|
export
|
fixed value ID exporting that does not refer to any name; |
|
fetch
|
fixed SFTP upload; |
|
fetch
|
improved full disk detection; |
|
filesystem
|
fixed possible boot failure on RB850Gx2 and RB1100AHx2; |
|
filesystem
|
improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7; |
|
filesystem
|
improved long-term filesystem stability and data integrity; |
|
gps
|
added GPS package support for Chateau devices; |
|
gps
|
fixed minor value unit typo; |
|
ipsec
|
fixed IPsec IRQ initialization on startup on TILE; |
|
ipsec
|
fixed printing of active peer statistics; |
|
ipv6
|
added "ra-preference" parameter support for RA; |
|
ipv6
|
fixed dynamic non link-local addresses displaying; |
|
ipv6
|
removed bogus commands from IPv6 neighbors menu; |
|
l2tp
|
added VRF support for L2TP client; |
|
l3hw
|
greatly improved route offloading speed; |
|
l3hw
|
improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; |
|
l3hw
|
improved offloading in cases of HW table overflow for CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; |
|
l3hw
|
improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices; |
|
l3hw
|
log HW routes count and the shortest offloaded subnet prefix if the HW memory gets full; |
|
l3hw
|
offload only main routing table; |
|
l3hw
|
optimized offloading when dealing with large volume of directly connected hosts; |
|
l3hw
|
partial routing table offload for Marvell Prestera DX4000/DX8000 switch chip series; |
|
leds
|
fixed ethernet LED behavior on wAP R ac; |
|
leds
|
fixed wireless related LED behavior with WW2 package; |
|
lhgg
|
improved system stability (introduced in v7.2); |
|
lora
|
do not allow setting non-existing forwarding server; |
|
lora
|
fixed bogus TOO_EARLY errors; |
|
lora
|
removed TX lookup table; |
|
lte
|
added SMS sending support for MBIM protocol; |
|
lte
|
added support for generic PXA1802 based modems; |
|
lte
|
allow only MCC/NMC format in "operator" parameter; |
|
lte
|
clear SIM values when modem in "stopped" state; |
|
lte
|
disabled extended signal info query for Telit LN940 module; |
|
lte
|
disabled wait for LTE auto attach; |
|
lte
|
expose diagnostics channel for all modems; |
|
lte
|
fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6; |
|
lte
|
fixed Sierra MC7455 modem initialization; |
|
lte
|
hide slave interfaces from export; |
|
lte
|
improved LTE interface initialization process on LtAP-2HnD; |
|
lte
|
improved stability when configuring multiple APN's at the same time in MBIM mode; |
|
lte
|
improved stability when upgrading LTE firmware on Chateau 5G; |
|
mlag
|
fixed MAC address moving between bridge ports; |
|
mpls
|
do MPLS forwarding for nexthops without mappings; |
|
mpls
|
fixed MPLS MTU and path MTU selection; |
|
mpls
|
fixed MPLS forwarding after any interface configuration parameter is changed; |
|
mpls
|
improved LDP AF selection process and behavior; |
|
mpls
|
made LDP bindings work on PPP interfaces; |
|
ntp
|
do not allow setting port number in "server" parameter; |
|
ntp
|
fixed "use-local-clock" behavior when enabling server; |
|
ospf
|
fixed GRE interface compatibility with OSPF; |
|
ospf
|
ignore instance route when originate-default=if-installed is enabled; |
|
ospf
|
improved stability when enabling or removing interface-template entries; |
|
ovpn
|
adjusted SHA2 authentication algorithm naming to allow legacy OpenVPN implementations to connect; |
|
ovpn
|
fixed hardware offloading support on CHR; |
|
ovpn
|
fixed memory leak on TILE architecture; |
|
ovpn
|
fixed packet processing on MT7621A; |
|
ovpn
|
fixed server instance not responding to incoming connections after reboot on CHR; |
|
ovpn
|
improved Windows client disconnect procedure in UDP mode; |
|
ovpn
|
improved server stability under continous overload; |
|
ovpn
|
improved service stability when outbound packets are blocked by firewall in UDP mode; |
|
ovpn
|
improved service stability when processing frequent disconnects in UDP mode; |
|
ovpn
|
improved stability when forwarding traffic on TILE; |
|
ovpn
|
moved authentication failure messages to "info" logging level; |
|
ovpn
|
reply with the same IP address that the connection was established to; |
|
ping
|
fixed socket allocation after VRF change; |
|
port
|
do not loose "parity" setting; |
|
ppp
|
added support for VRF; |
|
ppp
|
added warning when using prefix length other than /64 for router advertisement; |
|
ppp
|
fixed "remote-ipv6-prefix" parameter unsetting; |
|
ppp
|
fixed active sessions sometimes getting stuck; |
|
ppp
|
fixed issue with multiple active sessions when "only-one" is enabled; |
|
profile
|
added "wireguard" process classificator; |
|
profile
|
added "zerotier" process classificator; |
|
qsfp
|
reset module only when all ports are disabled; |
|
queue
|
allow to set higher limits than 4G; |
|
queue
|
display warning for CAKE type in simple and tree setups when "bandwidth" parameter is configured; |
|
queue
|
improved stability in large list of queue scenarios; |
|
rb5009
|
fixed 10G linking issues with Intel X520, XXV710 NICs; |
|
resource
|
fixed CPU type display under system resources for ARM and ARM64; |
|
romon
|
fixed VLAN tagged packet processing; |
|
route
|
fixed "nexthop" table printing; |
|
route
|
fixed "table" menu emptying after RouterOS upgrade; |
|
route
|
fixed IPv6 /127 route nexthop resolution; |
|
route
|
fixed static routes in VRF becoming invalid after reboot; |
|
route-filter
|
fixed community matchers; |
|
routerboard
|
fixed USB bus numbering on LtAP and M33G; |
|
routerboot
|
added extra shortcut information on how to boot into etherboot; |
|
routerboot
|
prevent enabling "protected-routerboot" on unsupported factory firmware versions; |
|
routerboot
|
properly reset system configuration when protected bootloader is enabled and reset button used; |
|
rsvp-te
|
improved stability when "Resv" received for non-existing session; |
|
sfp
|
added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation); |
|
sfp
|
hide empty monitor values in console; |
|
sfp
|
improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches; |
|
sfp
|
improved QSFP/SFP interface initialization for 98DXxxxx switches; |
|
smb
|
fixed SMB2 file list reporting; |
|
snmp
|
added VRF support (CLI only); |
|
snmp
|
added VRF support; |
|
snmp
|
fixed reported disk size when multiple external disks are attached; |
|
snmp
|
hide Vendor ID in DHCP MIB when branding is present; |
|
snmp
|
report "ifSpeed" as 0 if value out of bounds (use "ifHighSpeed" for high speed interfaces instead); |
|
ssh
|
added AES-GCM cipher support; |
|
ssh
|
fail non-interactive client after first invalid password; |
|
ssh
|
fixed corrupt host key automatic regeneration; |
|
ssh
|
fixed private key usage after downgrade; |
|
ssh
|
removed DSA public key authentication support; |
|
supout
|
added IGMP-Proxy section; |
|
supout
|
added NTP servers section; |
|
supout
|
added PIMSM section; |
|
supout
|
added RIP section; |
|
supout
|
added WireGuard section; |
|
supout
|
added simplified IPv4 and IPv6 routing table prints; |
|
switch
|
added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting); |
|
switch
|
fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches; |
|
system
|
fixed IP service initialization in VRF after system startup; |
|
system
|
fixed Kernel timer consistency; |
|
system
|
fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall; |
|
torch
|
properly capture all related IPv6 traffic; |
|
tr069-client
|
fixed RPC download of "1 Vendor Configuration File" with branding package; |
|
tunnels
|
improved packet handling over EoIP, IPIP and GRE tunnels; |
|
upnp
|
improved stability when processing incomplete HTTP header; |
|
user-manager
|
added "Acct-Interim-Interval" to predefined attribute list; |
|
user-manager
|
improved stability when received EAP attribute with non-existing state attribute; |
|
vpls
|
fixed "pw-l2mtu" parameter usage; |
|
vpls
|
fixed TE transport path usage after startup; |
|
vrrp
|
fixed learning of bridged local MAC addreses; |
|
w60g
|
improved stability on Cube 60Pro ac and CubeSA 60Pro ac; |
|
webfig
|
properly show all routing table content; |
|
wifiwave2
|
fixed VLAN tag handling; |
|
wifiwave2
|
general stability and throughput improvements; |
|
winbox
|
added "Comment" parameter for BGP templates and connections; |
|
winbox
|
added "Default Cost" parameter under "Routing/OSPF/Area" menu; |
|
winbox
|
added "ra-preference" parameter under "IPv6/ND" menu; |
|
winbox
|
added SKID and AKID parameters under "Certificate" menu; |
|
winbox
|
added missing "IBGP", "EBGP", "Limit Exceeded" and "Stopped" parameters under "Routing/BGP/Sessions" menu; |
|
winbox
|
added missing "Keep Sent Attributes" parameter under "Routing/BGP/Connection" menu; |
|
winbox
|
added missing "Scan List" parameter for W60G interfaces; |
|
winbox
|
added missing BGP session commands; |
|
winbox
|
added support for 2.5Gbps and 100Gbps Ethernet speed options; |
|
winbox
|
added warning message for LTE upgrade process; |
|
winbox
|
do not auto start Wireless Sniffer when opened; |
|
winbox
|
do not show "Session Uptime" parameter under "LTE" menu if not supported by modem; |
|
winbox
|
do not show "unknown" area under "Routing/OSPF/LSA" menu; |
|
winbox
|
do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu; |
|
winbox
|
fixed "Disconnect Timeout" parameter type under "CAPsMAN" menu; |
|
winbox
|
fixed "IP/Cloud" window refreshing after changes are detected; |
|
winbox
|
fixed "Type" values under "IP/Route" menu; |
|
winbox
|
fixed graph drawing in QuickSet; |
|
winbox
|
fixed hex type values under "User Manager" menu; |
|
winbox
|
fixed minor typo in reboot confirmation prompt; |
|
winbox
|
fixed typo in ZeroTier instance title; |
|
winbox
|
made "Interface Templates" table sortable under "Routing/OSPF" menu; |
|
winbox
|
made "MPLS Interface" table sortable under "MPLS" menu; |
|
winbox
|
made 56 the default ping size; |
|
winbox
|
made wireless access list entries sortable when using the wifiwave2 package; |
|
winbox
|
minimal required version is v3.33; |
|
winbox
|
moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu; |
|
winbox
|
moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IPv6/Firewall" menu; |
|
winbox
|
properly clean up SFP module information after it is unplugged; |
|
winbox
|
properly clean up disk after a failed file upload; |
|
winbox
|
properly load band values under "LTE" menu; |
|
winbox
|
removed obsolete "Routing Table" parameter under "IP/Firewall" menu; |
|
winbox
|
show "System/RouterBOARD/Mode Button" on devices that have such feature; |
|
winbox
|
show PVID column by default under "Bridge" menu; |
|
winbox
|
show correct file system type under "System/Disks" menu; |
|
winbox
|
take into account timezone for timed values under "User Manager" menu; |
|
wireless
|
fixed "wmm-support=required" checking; |
|
wireless
|
fixed EAP-TLS authentication; |
|
wireless
|
fixed GUD version in 3gpp information; |
|
x86
|
added support for Solarflare SFC1920 NIC; |
|
x86
|
fixed soft-id reading on virtualized x86 installations (introduced in v7.2); |
|
x86
|
improved support for Intel E810 NIC; |
|
zerotier
|
added support for Controller configuration; |