Component: wifiwave2
120 changelog entries across 13 version(s)
Activity over time (changelog entries per month)
- added an alternative QoS priority assignment mechanism based on IP DSCP;
- added comment property for registration-table;
- added station-bridge interface mode;
- correctly add interface to specified "datapath.interface-list";
- do not show default "l2mtu" on compact export;
- enable changing interface MTU and L2MTU;
- fixed malformed Interworking packet elements;
- fixed PTK renewal for interfaces in station mode;
- fixed re-connection failures for 802.11ax interfaces in station mode;
- fixed sniffer command not receiving any QoS null function frames when using 802.11ax radios;
- fixed untagged VLAN 1 entry when using "vlan-id" setting together with vlan-filtering bridge;
- fixed warning on CAP devices when radar detected;
- implemented an option to transmit IP multicast packets as unicasts;
- improved compliance with regulatory requirements;
- limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that;
- list APs with a higher maximum data rate as more preferable roaming candidates;
- log more information regarding authentication failures;
- make 4-way handshake procedure more robust when acting as supplicant (client);
- use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid";
- added "steering" parameters and menu to set up and monitor AP neighbor groups (CLI only);
- added more information on roaming candidates to BSS transition management requests (802.11v) and neighbor report responses (802.11k);
- added option to filter frames captured by the sniffer command (CLI only);
- automatically add wifi interfaces to appropriate bridge VLAN when wireless clients with new VLAN IDs connect;
- changed default behavior for handling duplicate client MAC addresses, added settings for changing it (CLI only);
- enabled PMK caching with EAP authentication types;
- fixed "reg-info" information for several countries;
- fixed "security.sae-max-failure" rate not limiting authentications correctly in some cases;
- fixed clearing CAPsMAN Common Name when disabling "lock-to-caps-man";
- fixed interface hangs on IPQ6010-based boards (introduced in v7.9);
- improved stability when changing interface settings;
- improved stability when receiving malformed WPA3-PSK authentication frames;
- make info log less verbose during client roaming (some info moved to wireless,debug log);
- rename "reg-info" country argument from "Macedonia" to "North Macedonia";
- use correct status code when rejecting WPA3-PSK re-association;
- fixed interface hangs on IPQ6010-based boards (introduced in v7.9);
- avoid transmitting extra bytes at the end of the packet after stripping a VLAN tag;
- do not show placeholder transmit power values on interface startup;
- fixed CAP connection when provisioning "manager=capsman";
- fixed CAP interface name when using "name-format";
- fixed connectivity issues wheen access-list is used;
- fixed DFS channel availability warning (introduced in v7.9);
- fixed dynamic interface adding to bridge on CAP device;
- fixed inability to disable CAPsMAN when there are RADIUS-authenticated clients connected;
- fixed incorrect limits on number of interfaces in station mode;
- fixed interface name change when restoring backup;
- fixed key handshake timeout with re-associating clients;
- fixed OWE authentication compatibility with 802.11ax client devices;
- fixed OWE authentication compatibility with third-party client devices (introduced in v7.8);
- fixed wireless throughput issues after 802.11r client roaming events on 802.11ac devices;
- improve protections against DoS attacks on WPA3-PSK;
- improved logging when an interface is unable to assign a VLAN tag to client;
- improved system stability when trying to exceed virtual AP limit;
- less verbose logging when WPA3-PSK clients are connecting;
- other system stability improvements;
- restore interface running state when connection to CAPsMAN is lost;
- added "radio/reg-info" command to show regulatory requirements (currently implemented for 802.11ac interfaces) (CLI only);
- added ability to configure antenna gain;
- added ability to configure beacon interval and DTIM period;
- added information on additional interface capabilities to radio parameters;
- automatically add a VLAN-tagged interface to the appropriate bridge VLAN;
- exit sniffer command and return error when trying to sniff on an unsupported channel;
- fixed 802.11r roaming for clients that performed initial authentication with an AP which has been restarted since;
- fixed issue of some supported channels not being listed in the radio parameters;
- fixed issue which lead to VLAN-tagged wireless clients receiving tagged traffic from other VLANs;
- fixed key handshake timeout for re-associating client devices on 802.11ac interfaces;
- fixed VLAN tagging for unencrypted (open) APs;
- improved general interface stability;
- improved regulatory compliance for hAP ax^2, hAP ax^3 and Chateau ax;
- improved WPS connection speed;
- increased maximum value for "channel.frequency" to 7300;
- show information on captured packets and added ability to save them locally in a pcap file;
- added wireless sniffer tool to capture wireless transmissions (CLI only);
- adjust monitoring of station interfaces to report when an interface is authorized, not just connected;
- enabled additional channels in UNII-3 and UNII-4 bands for Europe and USA on hAP ax^2, hAP ax^3 and Chateau ax;
- fixed compatibility with third-party devices when using SAE hash-to-element authentication with DH groups 20 and 21;
- fixed SAE authentication for interfaces in station mode when trying to connect to APs which require an anti-clogging token (introduced in RouterOS 7.4);
- implement 802.11w management protection SA Query procedures;
- improve protections from denial-of-service attacks on WPA3;
- added "datapath" settings to configure data forwarding for an interface (CLI only);
- added "ft-preserve-vlanid" parameter to control whether to change VLAN ID after FT;
- added "provisioning" menu to automatically assign interface configurations to radios (CLI only);
- added disable/enable commands to configuration profile sub-menus (CLI only);
- added information of per-station throughput in the registration table;
- added initial CAPsMAN support (only compatible with wifiwave2 interfaces) (CLI only);
- added interworking/Hotspot 2.0 support (CLI only);
- added more informative log messages on configuration profile changes;
- added option to set per-client vlan-id in access list (only supported on 802.11ax interfaces) (CLI only);
- do not permit a client device to be connected to more than one interface at a time;
- fixed "radio-mac" provisioning matcher;
- fixed 4-way handshake with TKIP;
- improved compliance with regulatory domain information;
- improved general system stability;
- improved system stability when multiple virtual AP are configured;
- properly report interface on which traffic is received when multiple station interfaces are used concurrently;
- released packages for MMIPS, PPC, TILE and x86;
- removed maximum limit for group key update interval and changed the default to 1 day;
- fixed enabling of unconfigured interfaces;
- fixed malfunction of WPA3 hash-to-element technique when enabled on multiple interfaces;
- fixed RADIUS accounting after fast-transition;
- fixed "WPA Key Data Length" value in EAPOL frame when FT-EAP-SHA384 AKM is used;
- added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
- added support for 802.11k;
- disable wireless interface after wireless configuration reset;
- fixed displaying of AKM in scan results;
- fixed duplicated AKM in RSN message;
- fixed group key update for client devices which connect via fast BSS transition;
- fixed incorrect AKM usage for FT-WPA3-EAP-192;
- fixed reassociation response sending for fast transition over DS;
- fixed setting of "ft-nas-identifier" parameter;
- fixed usage of Canada country setting on US locked devices;
- improved default channel width selection for interfaces in station mode;
- added initial support for roaming (802.11r) between local AP interfaces;
- fixed "frequency-scan" functionality (introduced in v7.3);
- improved WPA3 support stability;
- fixed WPA3-PSK authentication incompatibility with certain vendor and model devices;
- fixed VLAN tag handling;
- general stability and throughput improvements;
- added "client-isolation" feature;
- added support for handling disconnect request messages from RADIUS servers;
- fixed calling "scan" and "frequency-scan" commands through the API;