Component: qsfp

7.13 Stable 2023-Dec-14 (2 years ago)

• added support for QSFP-to-SFP adapters;
• fixed supported rates for breakout cables (introduced in v7.12);

7.12.1 Stable 2023-Nov-17 (2 years ago)

• fixed supported rates for breakout cables;

7.12 Stable 2023-Nov-09 (2 years ago)

• added 50Gbps rate support for QSFP28 interfaces;
• fixed incorrect QSFP temperature readings in negative temperature;
• improved auto link detection for AOC cables;
• use sub-interface configuration for establishing link (for 40Gbps and 100Gbps links, all sub-interfaces must be enabled);

7.6 Stable 2022-Oct-17 (3 years ago)

• added interface temperature warnings and shutdown;

7.3 Stable 2022-Jun-06 (3 years ago)

• reset module only when all ports are disabled;

7.2 Stable 2022-Mar-31 (3 years ago)

• correctly display auto-negotiation status;

7.1.2 Stable 2022-Feb-03 (4 years ago)

• correctly display auto-negotiation status;

6.49 Stable 2021-Oct-06 (4 years ago)

• improved system stability when setting unsupported link rates;

6.48.5 Long-term 2021-Sep-21 (4 years ago)

• improved system stability when setting unsupported link rates;

6.46.7 Long-term 2020-Sep-07 (5 years ago)

• fixed auto-negotiation status;

6.47.2 Stable 2020-Aug-13 (5 years ago)

• fixed break-out cable linking after reboot (introduced in v6.47);

6.47.1 Stable 2020-Jul-08 (5 years ago)

• fixed auto-negotiation status;
• ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);

6.47 Stable 2020-Jun-02 (5 years ago)

• added support for FEC mode (fec74), with the FEC mode disabled by default;

6.45.8 Long-term 2020-Jan-23 (6 years ago)

• do not report bogus monitoring readouts on modules without DDMI support;
• improved module monitoring readouts for DAC and break-out cables;

6.46.2 Stable 2020-Jan-14 (6 years ago)

• do not report bogus monitoring readouts on modules without DDMI support;
• improved module monitoring readouts for DAC and break-out cables;

6.46.1 Stable 2019-Dec-13 (6 years ago)

• do not show "sfp-wavelength" for cables that do not support it;

6.45.6 Stable 2019-Sep-10 (6 years ago)

• clear SFP monitoring data on port enable;
• correctly display SFP monitoring data;
• fixed EEPROM checksum validation;
• show more QSFP module diagnostics;