|
address
|
fixed crash when address is assigned to another bridge port; |
|
api
|
fixed double dynamic flags for "/ip firewall address-list print"; |
|
capsman
|
added "extension-channel" XX and XXXX auto matching modes; |
|
capsman
|
added "keepalive-frames" setting; |
|
capsman
|
added "skip-dfs-channels" setting; |
|
capsman
|
added CAP discovery interface list support; |
|
capsman
|
added DFS support; |
|
capsman
|
added EAP identity to registration table; |
|
capsman
|
added ability to specify multiple channels in frequency field; |
|
capsman
|
added save-channel option to speed up frequency selection on CAPsMAN restart; |
|
capsman
|
added support for "background-scan" and channel "reselect-interval"; |
|
capsman
|
added support for static virtual interfaces on CAP; |
|
capsman
|
changed channel "width" name to "control-channel-width" and changed default values; |
|
capsman
|
improved CAP status querying; |
|
capsman
|
improved support for communicating frame priority between CAP and CAPsMAN; |
|
certificate
|
SCEP client now supports FQDN URL and port; |
|
certificate
|
allow CRL address to be specified as DNS name; |
|
console
|
fixed "/ip neighbor discovery" export; |
|
console
|
fixed DHCP/PPP add-default-route distance minimal value to 1; |
|
console
|
fixed crash; |
|
console
|
fixed incorrect ":put [/lcd get enabled]" value; |
|
ddns
|
improved "dns-update" authentication validation; |
|
defconf
|
fixed Groove 52 ac band settings; |
|
defconf
|
fixed default configuration generation when wireless package is disabled; |
|
dhcp-client
|
added "script" option which executes script on state changes; |
|
dhcpv4
|
fixed string option parser; |
|
dhcpv4-server
|
added "lease-hostname" script parameter; |
|
dhcpv4-server
|
by default make server authoritative; |
|
dhcpv4-server
|
do some lease checks only on enabled object; |
|
discovery
|
fixed LLDP discovery, IPv6 address was not parsed correctly; |
|
dude
|
(changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=21&t=116471); |
|
email
|
check for errors during SMTP exchange process; |
|
ethernet
|
added "voltage-too-low" status for single port power injector devices; |
|
ethernet
|
fixed "loop-protect" on "master-port"; |
|
ethernet
|
fixed rare switch chip hang (could cause port flapping); |
|
ethernet
|
fixed unnecessary power cycle of powered device when changing any poe-out related setting on single port power injector devices; |
|
ethernet
|
renamed "rx-lose" to "rx-loss" in ethernet statistics; |
|
ethernet
|
reversed poe-priority on hEX PoE and OmniTIK 5 PoE to make "poe-priority" consistent to all other RouterOS priorities; |
|
fastpath
|
fixed rare crash on devices with dynamic interfaces; |
|
fetch
|
added "http-data" and "http-method" parameters to allow delete, get, post, put methods (content-type=application/x-www-form-urlencoded by default); |
|
fetch
|
fixed authentication failure; |
|
fetch
|
fixed download issue over HTTPS; |
|
gps
|
added "fix-quality" and "horizontal-dilution" parameters; |
|
graphing
|
fixed graph disappearance after power outage; |
|
hotspot
|
added access to HTTP headers using $(http-header-name); |
|
ike1
|
fixed ph2 ID logging; |
|
ike2
|
allow multiple child SA traffic selectors on re-key; |
|
ike2
|
always replace empty TSi with configured address if it is available; |
|
ike2
|
check child state before allowing rekey; |
|
ike2
|
default to /32 peer address mask; |
|
ike2
|
fixed CTR mode; |
|
ike2
|
fixed EAP message length; |
|
ike2
|
fixed ISA handler object removal on SA delete; |
|
ike2
|
fixed RSA authentication without EAP; |
|
ike2
|
fixed disabled DPD; |
|
ike2
|
fixed last EAP auth payload type; |
|
ike2
|
fixed ph2 state when sending notify; |
|
ike2
|
fixed policy release during SA negotion; |
|
ike2
|
fixed state when sending delete packet; |
|
ike2
|
improved logging; |
|
ike2
|
kill only child SAs which are not re-keyed by remote peer; |
|
ike2
|
log RADIUS timeout message under error topic; |
|
ike2
|
remove old SA after rekey; |
|
ike2
|
send EAP identity as user-name RADIUS attribute; |
|
ike2
|
update "calling_station_id" RADIUS attribute; |
|
ike2
|
update peer identity after successful EAP authentication; |
|
ippool
|
return proper error message when trying to create duplicate name; |
|
ipsec
|
added "last-seen" parameter to active connection list; |
|
ipsec
|
allow mixing aead algorithms in proposal; |
|
ipsec
|
better responder flag calculator for console; |
|
ipsec
|
disallow AH+ESP combined policies ; |
|
ipsec
|
do not loose "use-ipsec=yes" parameter after downgrade; |
|
ipsec
|
enable aes-ni on i386 and x64 for cbc, ctr and gcm modes; |
|
ipsec
|
fixed "/ip ipsec policy group export verbose"; |
|
ipsec
|
fixed "mode-cfg" verbose export; |
|
ipsec
|
fixed SA authentication flag; |
|
ipsec
|
renamed "hw-authenc" flag to "hw-aead"; |
|
ipsec
|
show hardware accelerated authenticated SAs; |
|
ipsec
|
updated tilera classifier for UDP encapsulated ESP; |
|
l2tp
|
added support for multiple L2TP tunnels (not to be confused with sessions) between same endpoints (required in some LNS configurations); |
|
l2tp
|
fixed hidden attribute decryption in forwarded CHAP responses for LNS; |
|
l2tp-server
|
added "caller-id-type" to forward calling station number to RADIUS on authentication; |
|
l2tp-server
|
added "use-ipsec=required" option; |
|
l2tp-server
|
fixed upgrade to keep "use-ipsec=yes" in L2TP server; |
|
leds
|
added LTE modem access technology trigger; |
|
leds
|
changed error message on unsupported board; |
|
leds
|
do not update single LED state when it is not changed; |
|
leds
|
show warning on print when "modem-signal-threshold" is not available; |
|
log
|
added "gps" topic; |
|
log
|
added "tr069" topic; |
|
log
|
added missing "license limit exceeded" log entry; |
|
log
|
added warning when Winbox/Dude sessions were denied; |
|
log
|
do not show changes in packet if NAT has not been used; |
|
log
|
make SNMP logs more compact; |
|
lte
|
added "session-uptime" in info command; |
|
lte
|
added LTE signal level reading for Cinterion modems; |
|
lte
|
added error handling for remote AT execute; |
|
lte
|
added initial support for DWR-910 modem; |
|
lte
|
added initial support for Quectel ec25; |
|
lte
|
added initialization for Cinterion; |
|
lte
|
added log entry for SMS delivery report; |
|
lte
|
added support for Vodafone R216 (Huawei); |
|
lte
|
buffer AT events while info command is active; |
|
lte
|
fixed "/interface lte info X once"; |
|
lte
|
fixed IPv6 address prefix on interface |
|
lte
|
fixed network mode selection for me909u, mu609; |
|
lte
|
fixed older standard CEREG parsing; |
|
lte
|
fixed support for Huawai R216; |
|
lte
|
fixed user-command; |
|
lte
|
reset interface stats on "link-down"; |
|
netinstall
|
fixed typos; |
|
ntp
|
restart NTP client when it is stuck in error state; |
|
ppp
|
added "bridge-horizon" option under PPP/Profile; |
|
ppp
|
added option to specify "interface-list" in PPP/Profile; |
|
ppp
|
fixed rare kernel failure on PPP client connection; |
|
ppp
|
fixed rare kernel failure when receiving IPv6 address on PPP interface; |
|
ppp
|
include rates, limits and address-lists parameters in RADIUS accounting requests; |
|
ppp-client
|
added support for Datacard 750UL, DWR-730 and K4607-Zr; |
|
pppoe
|
added warning on PPPoE client/server, if it is configured on slave interface; |
|
pppoe
|
set default keepalive 10s for newly created PPPoE clients; |
|
quickset
|
added initial LTE AP mode support; |
|
rb1100ahx2
|
fixed random counter resets for ether12,13; |
|
rb3011
|
added partitioning support; |
|
smb
|
fixed different memory leaks and crashes; |
|
smb
|
fixed share path on devices with "/flash" directory; |
|
smips
|
reduced RouterOS main package size; |
|
snmp
|
"No Such Instance" error message is replaced with "No Such Object"; |
|
snmp
|
added fan-speed OIDs in "/system health print oid"; |
|
snmp
|
added optical table; |
|
snmp
|
fixed rare crash; |
|
snmp
|
improved getall filter; |
|
snmp
|
improved response speed when multiple requests are received within short period of time; |
|
snmp
|
increase "engineBoots" value on reboot; |
|
snmp
|
optimized bridge table processing; |
|
tile
|
added initial support for NVMe SSD disk drives; |
|
tile
|
fixed IPSec crash (introduced in 6.39rc64); |
|
tile
|
optimized hardware encryption; |
|
tr069-client
|
added "Device.Hosts.Host.{i}." support; |
|
tr069-client
|
added "Device.WiFi.NeighboringWiFiDiagnostic." support; |
|
tr069-client
|
added "Ethernet.Interface.{i}.MACAddress" parameter; |
|
tr069-client
|
added DHCP server support; |
|
tr069-client
|
added Upload RPC "2 Vendor Log File" support; |
|
tr069-client
|
added architecture name parameter (X_MIKROTIK_ArchName - vendor specific); |
|
tr069-client
|
added basic stats parameters for some interface types; |
|
tr069-client
|
added basic support for "/ip firewall filters"; |
|
tr069-client
|
added connection request authentication; |
|
tr069-client
|
added firewall NAT support using vendor Parameters; |
|
tr069-client
|
added parameters for DNS client management support; |
|
tr069-client
|
added ping diagnostics support; |
|
tr069-client
|
added support for escaped entity references (& < > ' "); |
|
tr069-client
|
added support for managing "/system/identity/" value; |
|
tr069-client
|
added support for memory and CPU load parameters; |
|
tr069-client
|
added support for uploading/downloading factory script; |
|
tr069-client
|
added traceroute diagnostics support; |
|
tr069-client
|
close connection if CPE considers XML as invalid; |
|
tr069-client
|
fixed "AddObjectResponse" "InstanceNumber" value; |
|
tr069-client
|
fixed "Device.ManagementServer." value update; |
|
tr069-client
|
fixed XML special character parsing; |
|
tr069-client
|
fixed crash on =acs-url change special case; |
|
tr069-client
|
fixed special escape characters on XML data send; |
|
tr069-client
|
fixed write for "Device.ManagementServer.URL"; |
|
tr069-client
|
general improvements on reducing storage space; |
|
tr069-client
|
generate random connection request target path; |
|
tr069-client
|
hide "Device.PPP.Interface.{i}.Password" value; |
|
tr069-client
|
improved LTE monitoring process; |
|
tr069-client
|
increased performance on GetParameterValues; |
|
tr069-client
|
made any Download RPC overwrite configuration except ".alter"; |
|
tr069-client
|
make more Parameters deny active notifications; |
|
tr069-client
|
set CHR license ID as ".SerialNumber" value to avoid "no serial number" error in ACS; |
|
traceroute
|
small fix; |
|
tunnels
|
fixed reboot loop on configurations with IPIP and EoIP tunnels (introduced in 6.39rc68); |
|
usb
|
added support for more CP210X devices; |
|
userman
|
allow "name-for-user" to be empty and not unique; |
|
userman
|
automatically select all newly created users to generate vouchers; |
|
userman
|
fixed rare crash when User Manager requested file does not exist on router; |
|
userman
|
fixed rare web interface crash while using Users section; |
|
wAP ac
|
improved 2.4GHz wireless performance; |
|
webfig
|
added menu bar to quickly select between Webfig, Quickset and Terminal; |
|
webfig
|
allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates"; |
|
webfig
|
allow to change global variable contents; |
|
webfig
|
allow to enter frequency ranges in wireless scan list; |
|
webfig
|
allow to select "default-encryption" profile on PPP tunnels; |
|
webfig
|
correctly specify routing filter prefix; |
|
webfig
|
do not allow to reorder items if table is sorted by some column; |
|
webfig
|
fixed bridge property display; |
|
webfig
|
fixed delays on key press in terminal; |
|
webfig
|
fixed tab ordering on Google Chrome; |
|
webfig
|
fixed last-link-up & last-link-down time information; |
|
webfig
|
improved field layout; |
|
webfig
|
make Terminal window work within Webfig window; |
|
webfig
|
show all available options under Advanced Mode for wireless interfaces; |
|
webfig
|
show proper error messages for optional erroneous text fields; |
|
winbox
|
added "Flush" button under unicast-fdb menu; |
|
winbox
|
added "group-key-update" to CAPsMAN security settings; |
|
winbox
|
added "k" and "M" unit support to PPP secret limit-bytes parameters; |
|
winbox
|
added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" parameters; |
|
winbox
|
added "save-selected" setting under CAPsMAN channels; |
|
winbox
|
added "static-virtual" to wireless CAP; |
|
winbox
|
added GPS menu; |
|
winbox
|
added protected routerboard parameters under routerboard settings menu; |
|
winbox
|
allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates"; |
|
winbox
|
allow to change user password to empty one; |
|
winbox
|
allow to not specify certificate in IPSec peer settings; |
|
winbox
|
allow to specify "route-distance" in "dhcp-client" if "special-classless" mode is selected; |
|
winbox
|
allow to specify certificate type when exporting it; |
|
winbox
|
allow to specify interfaces that CAPsMAN can use for management; |
|
winbox
|
allow unhide SNMP passwords; |
|
winbox
|
allowed to specify static-dns as list; |
|
winbox
|
do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB; |
|
winbox
|
do not create time field when copying CAPsMAN access list entry; |
|
winbox
|
do not show "dpd-max-failures" on IKEv2; |
|
winbox
|
do not show empty LTE fields in Info menu; |
|
winbox
|
do not start Traffic Generator automatically when opening "Quick Start"; |
|
winbox
|
do not try to disable dynamic items from firewall tables; |
|
winbox
|
fixed "Montly" typo to "Monthly" in Graphing menu; |
|
winbox
|
fixed CAPsMAN channels frequency (allow to specify a list of them); |
|
winbox
|
fixed IPSec "mode-config" DNS settings; |
|
winbox
|
fixed issue when working IPSec policies were shown as invalid; |
|
winbox
|
fixed misleading error when trying to export certificate; |
|
winbox
|
fixed typo in BGP advertisements menu Aggragator->Aggregator; |
|
winbox
|
hide "wps-mode" & "security-profile" in wireless nv2 mode; |
|
winbox
|
hide health menu on RB450; |
|
winbox
|
improved "/tool torch"; |
|
winbox
|
increased maximal number of Winbox sessions 20->100; |
|
winbox
|
properly name CAP Interface on new interface creation; |
|
winbox
|
properly show "dhcp-server" warnings; |
|
winbox
|
properly show IPSec "installed-sa" "enc-algorithm" when it is aes-gcm; |
|
winbox
|
properly show wireless registration table stat counters; |
|
winbox
|
removed "sfp-rate-select" setting from ethernet interface; |
|
winbox
|
removed unnecessary "/system health" menu on "hAP ac lite"; |
|
winbox
|
set default "dhcp-client" "default-route-distance" value to 1; |
|
winbox
|
show "A" flag for IPSec policies; |
|
winbox
|
show "H" flag for IPSec installed SAs; |
|
winbox
|
show PoE-OUT current, voltage and power only on devices which can report these values; |
|
wireless
|
added Egypt 5.8 country settings; |
|
wireless
|
added PEAP authentication support for wireless station mode; |
|
wireless
|
apply broadcast bit to DHCP requests when using "station-pseudobridge" mode; |
|
wireless
|
do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used; |
|
wireless
|
fixed RBSXT5HacD2nr2 small channel support; |
|
wireless
|
fixed crash while running "spectral-scan"; |
|
wireless
|
fixed dynamic wireless interface removal from bridge ports when changing wireless mode; |
|
wireless
|
fixed false positive DFS radar detection caused by iPhone 6s devices; |
|
wireless
|
fixed issue when wireless interfaces might not show up in CAP mode; |
|
wireless
|
fixed occasional crash on interface disabling; |
|
wireless
|
fixed rare crash on nv2 configurations; |
|
wireless
|
fixed rare wireless ac interface lockup; |
|
x86
|
added support for NVMe SSD disk drives; |