Search changelog entries
| Component | Change |
|---|---|
| api | properly classify API sessions in log; |
| chr | enabled promiscuous mode (requires to be enabled on host as well) when running CHR on Hyper-V; |
| kidcontrol | added dynamic accept firewall rules to allow bandwidth limit when FastTrack is enabled; |
| led | fixed LED default configuration for LtAP mini; |
| snmp | added "rssi" and "tx-sector-info" value support for w60g type interfaces; |
| snmp | added station "distance", "phy-rate", "rssi" value support for w60g type interfaces; |
| ssh | allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled; |
| w60g | added 4th 802.11ad channel (CLI only); |
| w60g | added distance measurement; |
| w60g | do not reset interface after adding comment; |
| w60g | general stability and performance improvements; |
| w60g | improved maximum achievable distance; |
| w60g | properly report center status under "tx-sector-info"; |
| winbox | show "sector-writes" on ARM devices that have such counters; |
| winbox | show "System/Health" only on devices that have health monitoring; |
| Component | Change |
|---|---|
| bridge | allow to make changes for bridge port when it is interface list; |
| bridge | fixed FastPath for bridge master interfaces (introduced in v6.42); |
| certificate | fixed "add-scep" template existence check when signing certificate; |
| chr | fixed adding MSTI entries; |
| chr | fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V; |
| chr | fixed various network hang scenarios when running CHR on Hyper-V; |
| console | fixed script permissions if script is executed by other RouterOS service; |
| dhcpv4-server | fixed DHCP server that was stuck on invalid state; |
| health | changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+; |
| health | fixed incorrect PSU index for CRS328-4C-20S-4S+; |
| ipsec | improved reliability on IPsec hardware encryption for RB1100Dx4; |
| kidcontrol | fixed dynamically created firewall rules order; |
| led | added "dark-mode" functionality for hEX S and SXTsq 5 ac devices; |
| led | fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58); |
| led | use routers uptime as a starting point when turning off LEDs if option was not enabled on boot; |
| ppp | fixed "hunged up" grammar to "hung up" within PPP log messages; |
| quickset | added missing wireless "channel-width" settings; |
| quickset | added support for "5ghz-a/n" band when CPE mode is used; |
| snmp | added remote CAP count OID for CAPsMAN; |
| snmp | fixed readings for CAPsMAN slave interfaces; |
| supout | added "partitions" section to supout file; |
| usb | properly detect USB 3.0 flash on RBM33G when jumper is removed; |
| userman | improved unique username generation process when adding batch of users; |
| w60g | improved RAM memoy allocation processes; |
| winbox | added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels; |
| winbox | allow to specify full URL in SCEP certificate signing process; |
| winbox | by default specify keepalive timeout value for tunnel type interfaces; |
| winbox | show "scep-url" for certificates; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| winbox | show firmware upgrade message at the bottom of "System/RouterBOARD" menu; |
| wireless | enable all chains by default on devices without external antennas after configuration reset; |
| wireless | improved Nv2 reliability on ARM devices; |
| Component | Change |
|---|---|
| bridge | do not allow to add same interface list to bridge more than once; |
| bridge | fixed LLDP packet receiving; |
| bridge | fixed processing of fragmented packets when hardware offloading is enabled; |
| console | fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1); |
| crs317 | fixed link flapping when inserted S+RJ10 module without any cable; |
| defconf | fixed wAP LTE kit default configuration; |
| dhcpv4 | prevent sending out ICMP port unreachable packets; |
| dhcpv4-client | fixed DHCP client stuck in renewing state; |
| dhcpv6-relay | fixed missing configuration after reboot; |
| filesystem | fixed NAND memory going into read-only mode; |
| hotspot | fixed user authentication when queue from old session is not removed yet; |
| interface | fixed "built-in=no" parameter for manually created interface lists; |
| interface | fixed "dynamic" built-in interface list behaviour; |
| interface | fixed interface list which include disabled member; |
| interface | fixed interface list which include/exclude another list; |
| interface | fixed interface configuration responsiveness; |
| ipsec | fixed policies becoming invalid if added after a disabled policy; |
| ipsec | improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4; |
| led | added "dark-mode" functionality for hAP ac and hAP ac^2 devices; |
| lte | improved LTE communication process on MMIPS platform devices; |
| quickset | fixed dual radio mode detection process; |
| routerboard | properly represent board name for hAP ac^2; |
| tile | fixed Ethernet interfaces becoming unresponsive; |
| winbox | allow to specify "any" as wireless "access-list" interface; |
| winbox | fixed "/ip dhcp-server network set dns-none" parameter; |
| wireless | enable all chains by default on devices without external antennas after configuration reset; |
| wireless | fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42); |
| wireless | fixed usage of allowed signal strength values received from RADIUS; |
| wireless | improved wireless throughput on hAP ac^2 and cAP ac; |
| x86 | fixed reboot caused by MAC Winbox connection; |
| Component | Change |
|---|---|
| bridge | fixed hardware offloading for MMIPS and PPC devices; |
| bridge | fixed LLDP packet receiving; |
| crs3xx | fixed failing connections through bonding in bridge; |
| ike2 | use "policy-template-group" parameter when picking proposal as initiator; |
| led | added "dark-mode" functionality for hAP ac and hAP ac^2 devices; |
| led | improved w60g alignment trigger; |
| lte | allow to send "at-chat" command over disabled LTE interface; |
| routerboard | fixed "mode-button" support on hAP lite r2 devices; |
| w60g | allow to manually set "tx-sector" value; |
| w60g | fixed incorrect RSSI readings; |
| w60g | show phy rate on "/interface w60g monitor" (CLI only); |
| winbox | fixed bridge port MAC learning parameter values; |
| winbox | show "Switch" menu on cAP ac devices; |
| winbox | show correct "Switch" menus on CRS328-24P-4S+; |
| wireless | improved compatibility with BCM chipset devices; |